• 한국철도학회논문집
• /
• 제11권2호
• /
• pp.165-175
• /
• 2008

철도판형교에 있어 선받침은 사용 중에 많은 문제를 야기하고 있으며, 구조적으로 불안정하다. 기존 선받침의 문제점을 파악하기 위해 수평저항능력 실험을 수행하였다. 유지보수에 용이하고 들림현상에 저항할 수 있는 개선된 스페리칼받침을 개발하여 기존받침을 교체하였다. 개선된 스페리칼받침의 교체성능 실험과 부반력 저항능력 실험이 수행되어, 유지보수 성능 및 부반력 저항능력이 증명되었다. 선받침 상태 및 스페리칼받침으로 교체된 상태에서 판형교의 동적 거동 및 각 교량받침의 동적 거동을 계측하여 거동의 차이를 분석하였다. 이러한 실험 및 분석을 통하여 개선된 스페리칼받침이 철도 판형교에 교량받침으로 사용하기에 적합함을 알 수 있었다.

• 한국정밀공학회지
• /
• 제25권8호
• /
• pp.96-103
• /
• 2008

In this study, we performed the biomechanical analysis of cervical plate systems by using a computer simulation based on finite element method to derive reliable model by analysis of design variables and fatigue behavior. To simulate the cervical spine movement in-vivo state by surgery, we modeled the cervical plate system which consisted of screws, rings, rivets, and plate and Ultra High Molecular Weight Polyethylene (UHMWPE) Block. The experiment of cervical plate system followed the ASTM F1717 standards that covered the materials and methods for the static and fatigue testing. The result of computer simulation is compared with experimented test. We expected this study is to derive reliable results by analysis of design variables and fatigue behavior for developing a new model.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.9-17
• /
• 2022

In this paper, wind load on a semi-submersible rig was investigated using Computational Fluid Dynamics (CFD). A maritime atmospheric boundary layer model for wind profile was implemented such that the wind profile shapes were retained throughout the computational domain. Wind load on the semi-submersible rig was calculated under the maritime atmospheric boundary layer and matched well with the results from wind tunnel test within a ±20% error. Overturning moments with variation of draft were investigated by decomposing into drag and lift components. It was observed that the contribution from lift to the overturning moments increased as the draft got higher. The majority of the lift components originated from deckbox which served as a lifting body due to the accelerated streamlines between waterline and the bottom of the deckbox.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.373-377
• /
• 2003

Recently, advanced manufacturing systems with high speed and intelligence have been developed for the betterment of machining ability. In this case, reliability prediction work with motion characteristic evaluation of sliding cover(C-plate, Bellows, etc) has also important role from design procedure to manufacturing and assembly process. Accordingly in this study, H/W test-bed system for reliability evaluation of sliding cover has been developed to obtain proper reference data for design of new model, prevention trouble (failure mode), and improvement of quality and lift cycle extremely for advanced mother machinery.

• International Journal of Railway
• /
• 제5권1호
• /
• pp.10-21
• /
• 2012

Open steel plate girder (OPSG) bridges are the most prevalent railroad bridge type in Korea, constituting about 40% of all railroad bridges. Solid steel bearings, known as line type bearings, are placed in most OSPG railway bridges. However, the line type rigid bearings generate several problems with the bridge's dynamic behavior and maintenance in service. To compare and investigate the dynamic behaviors of line type, spherical and disk bearings, the vertical displacements of each bearing, including fixed and expansion type, under running vehicles are measured and analyzed. The displacements of disk and spherical bearings are measured after replacing the line type bearings with spherical and disk bearings. This study also analyzed dynamic behaviors of bridges. Furthermore, the deformation of the PTFE (Polytetrafluoroethylene) plate that is placed inside of expansion type spherical and disk bearings is measured and its effect on the dynamic behavior of the bridges is discussed. The up-lift phenomenon at the bearings installed for the steel bridges is estimated. The vertical displacements at mid-span of the bridges are compared according to the bearing types. Finally, the 1st mode natural frequencies are estimated, and the relationship to the vertical displacement is discussed.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.117-123
• /
• 2015

An experimental study of model truss-type vertical gate consisting of a truss and a plate was presented in this paper to examine the structural dynamics of the gates. A 1:61 scale model was constructed for the 95 m prototype gate using an acrylic truss and an acrylonitrile butadiene styrene plate. The scaled model was tested in a 1.6 m wide concrete flume for two orientations to determine the effects of gate orientation on structural vibrations. Natural frequencies of the model gate was measured and calibrated with FEM predictions. Vertical vibrations were measured under various operational conditions, including a range of bottom opening heights and different upstream and downstream water levels. The gate model with reverse direction was preferred due to its low overall vibrational response and flow level combinations. The test results also provide a basic dataset for development of operations guidelines that minimize flow-induced vibrations of the gates.

• Journal of Microbiology and Biotechnology
• /
• 제10권5호
• /
• pp.728-732
• /
• 2000

Propagation of Anagrapha falcifera nuclear polyhedrosis virus(AfNPV) was investigated using well-plates and split-flow air-lift bioreactors. In well-plate experiments, the effects of pH, cell density at a point of infection, serum concentration, DEAE-dextran, and lipid on virus propagation were all closely examined. The AfNPV titer in well-plates was optimal at pH 6.8 and $3{\times}10^6$ cells/$cm^2$. The virus titer was not dramatically affected when the fetal bovine serum concentration was reduced from 10% to 5%. The addition of cholesterol at AfNPV infection of Sf21 cells enhanced the virus titer, whereas the addition of DEAE-dextran did not improve the titer. The AfNPV titer ($3.8{\times}10^7$ $TCID_{50}/ml$) at optimized conditions for well-plate experiments was 2.5-fold higher than for the control. In bioreactor experiments, the AfNPV titer showed its maximum level at air flow rates of 20-40 ml/min. In a split-flow air-lift bioreactor, AfNPV titer ($2.3{\times}10^7\;TCID_{50}/ml$) was 1.5-fold higher than the control when the culture was at pH 6.8 and supplemented with 0.34 mM cholesterol.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1450-1459
• /
• 2007

Line type rigid bearings for Open-Steel-Plate-Girder railway bridges have several problem in service, and they are unstable structurally. Thus, spherical bearings having advanced maintenance capability and device to resistance up-lift are developed and replace the existing ones. A experiment of maintenance for a new placed spherical bearings under real Open-Steel-Plate-Girder bridge is conducted and their good maintenance performance is proved. The dynamic behavior of the bridge is measured and analyzed for the two cases of the existing and replacing bearings. Therefore, the effect of the new spherical bearings on the railway bridge is assessed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.636-642
• /
• 1997

Laminar vortex shedding behind a circular cylinder with and without splitter plates attached to the circular cylinder at low Reynolds numbers are simulated by solving the unsteady incompressible Navier-Strokes equations. The Strouhal number, lift and drag rapidly change with the splitter plate. Far-field noise from the vortex shedding behind the cylinder is computed using the Lighthill acoustic analogy and the Curle's solution for the Lighthill equation. The acoustic source functions are obtained from the computed near-field velocity and pressure. Numerical results show that the volume quadrupole noise is small at low Mach numbers, compared with the surface dipole noise. Also the amplitude and frequency of the acoustic density fluctuations are varied with the length of splitter plates. The scattering effects at the edge of a splitter plate are considered by using the half-plane Green's function.

• 대한의용생체공학회:의공학회지
• /
• 제12권3호
• /
• pp.149-156
• /
• 1991

In this paper, fluttering behavior of mechanical bileaflet heart valve prosthesis was analyzed taking into consideration of the impact between valve plate and stopper Vibration system of the valve was modeled as a rotating system, and equations are induced by moment equilibrium equations. Lift force, drag force, gravity and buoyancy were considered as external forces acting on the valve plate/ The 4th order Runge-Kutta method was used to solve the equations. Valve plate does not come to the static equilibrium position at a stretch, but come to that position after under damping vibration. Damping ratio increases as the cardiac optput increases, and the mean damping ratio is in the range of 0.16~40.25. Fluttering frequency does not have any specific value, but varies as a function of time. It is in the range of 10~40Hz. Valve opening appears to be affected by the orientation of the of the valve relative to gravitational forces.