• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.6
• /
• pp.769-775
• /
• 2008

This study was on the relative net income (RNI) for 18,286 Iranian Holstein cows from 799 herds, with first freshening between 1991 and 2000. Two kinds of production system, which differed mainly in milk pricing system and feed cost, were considered. Four different models adopted from the literature were examined to find the optimum model. They differed by the cost of rearing and growth after first calving and they needed different amounts of economic data at the farm level. Results showed that four measures of RNI were highly correlated (>0.96) and could be used equally to measure lifetime profitability of cows. Therefore, in herds without a regular system for recording economic and management data, use of the simplest model is recommended. Multiple regression analysis revealed that RNI was affected by age at first freshening, milk yield and days of productive life (DPL), regardless of production system, and a similar breeding goal could be defined for the two systems. Multiple regression analysis of RNI showed that in order to obtain an unbiased estimate of economic value for DPL, the per day milk yield, not total lifetime milk yield, should be included in the regression model along with DPL. Regression analysis suggested that it is possible to predict RNI using information on age at first freshening along with the length of first lactation and per day milk yield with a coefficient of determination ranging from 0.44 to 0.47.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.346-353
• /
• 2012

The Laser-Induced Breakdown Spectroscopy (LIBS) has great advantages as an analytical technique, namely real-time analysis without sample preparation, ideal for mobile chemical sensor for space exploration. The LIBS plasma characteristics are strongly dependent on the surrounding pressure. In this study, seven types of target (C, Ti, Ni, Cu, Sn, Al, Zn) were investigated for their elemental lifetime. The target was located in vacuum chamber which has the pressure range of 760 to $10^{-5}$ torr. As the pressure is decreased, the elemental lifetimes of carbon and titanium declined, while all other targets showed increased lifetimes until reaching 1 torr and declined with continued pressure decrease. The boiling point and electronegativity amongst the physicochemical properties of the samples are used to explain this peculiarity.

• Korean Journal of Social Welfare
• /
• v.41
• /
• pp.43-67
• /
• 2000

The main source in financing the National Pension benefits is the contribution raised from the insured's earnings. So, Most of the insured take a great interest in the questions of what return on the payment of contribution National Pension benefits provide and whether there be the difference in return according to earnings level. The Purpose of this study is to assess money's worth of National Pension and to answer the above questions. There are two basic types of money worth analysis, empirical and hopothetical. This study basically belongs to the former in terms that it is based on actual earnings and insured term. For performing money's worth analysis, four different measures which are referred as the "break-even period", the "benefit/tax ratio", the "net lifetime transfer", the "internal rate of return" are used and they all involve the way in which the relationship between the present value of contributions and the present values of benefit is present. The results which evaluate average money's worth of accrued rights before 1999 are le as follows. Break-even period is about 43 months, benefit/tax ratio being 4.9, net lifetime transfers being about 37 mil1ion won, internal rate of return being 33.2%. This verifies that money' worth of National Pension is much higher than actuarially fair. In the mean while, money' worth is proved to be very different according to earnings level. The progressivity relationship between earnings level and rate of return is found in all measures but net lifetime transfer.

• Nuclear Engineering and Technology
• /
• v.32 no.6
• /
• pp.566-594
• /
• 2000

In most LMFBR(Liquid Metal Fast Breed Reactor) design, the operating temperature is very high and the time-dependent creep and stress-rupture effects become so important in reactor structural design. Therefore, unlike with conventional PWR, the normal operating conditions can be basically dominant design loading because the hold time at elevated temperature condition is so long and enough to result in severe total creep ratcheting strains during total service lifetime. In this paper, elevated temperature design of the conceptually designed baffle annulus regions of KALIMER(Korea Advanced Liquid MEtal Reactor) reactor internal strictures is carried out for normal operating conditions which have the operating temperature 53$0^{\circ}C$ and the total service lifetime of 30 years. For the elevated temperature design of reactor internal structures, the ASME Code Case N-201-4 is used. Using this code, the time-dependent stress limits, the accumulated total inelastic strain during service lifetime, and the creep-fatigue damages are evaluated with the calculation results by the elastic analysis under conservative assumptions. The application procedures of elevated temperature design of the reactor internal structures using ASME Code Case N-201-4 with the elastic analysis method are described step by step in detail. This paper will be useful guide for actual application of elevated temperature design of various reactor types accounting for creep and stress-rupture effects.

• Animal Bioscience
• /
• v.36 no.12
• /
• pp.1806-1820
• /
• 2023

Objective: The present study was aimed primarily for estimating various genetic parameters (heritability, genetic correlations) of reproduction (age at first calving [AFC], first service period [FSP]); production (first lactation milk, solid-not fat, and fat yield) and lifetime traits (lifetime milk yield, productive life [PL], herd life [HL]) in Tharparkar cattle to check the association of reproduction traits with lifetime traits through two different methods (Frequentist and Bayesian) for comparative purpose. Methods: Animal breeding data of Tharparkar cattle (n = 964) collected from Livestock farm unit of ICAR-NDRI Karnal for the period 1990 through 2019 were analyzed using a Frequentist least squares maximum likelihood method (LSML; Harvey, 1990) and a multi-trait Bayesian-Gibbs sampler approach (MTGSAM) for genetic correlations estimation of all the traits. Estimated breeding values of sires was obtained by BLUP and Bayesian analysis for the production traits. Results: Heritability estimates of most of the traits were medium to high with the LSML (0.20±0.44 to 0.49±0.71) and Bayesian approach (0.24±0.009 to 0.61±0.017), respectively. However, more reliable estimates were obtained using the Bayesian technique. A higher heritability estimate was obtained for AFC (0.61±0.017) followed by first lactation fat yield, first lactation solid-not fat yield, FSP, first lactation milk yield (FLMY), PL (0.60±0.013, 0.60±0.006, 0.57±0.024, 0.57±0.020, 0.42±0.025); while a lower estimate for HL (0.38±0.034) by MTGSAM approach. Genetic and phenotypic correlations were negative for AFC-PL, AFC-HL, FSP-PL, and FSP-HL (-0.59±0.19, -0.59±0.24, -0.38±0.101 and -0.34±0.076) by the multi-trait Bayesian analysis. Conclusion: Breed and traits of economic importance are important for selection decisions to ensure genetic gain in cattle breeding programs. Favourable genetic and phenotypic correlations of AFC with production and lifetime traits compared to that of FSP indicated better scope of AFC for indirect selection of life-time traits at an early age. This also indicated that the present Tharparkar cattle herd had sufficient genetic diversity through the selection of AFC for the improvement of first lactation production and lifetime traits.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1021-1033
• /
• 2017

In this study, an optimum process to improve structural integrity was established by investigating effect of the process variables on fatigue lifetime of steel-sleeve repair welds in buried gas pipeline. Residual stresses in the repair welds were derived through sequentially-coupled temperature-stress analysis using ABAQUS, which is a commercial finite element analysis program. In addition, variations of operating stresses were derived by finite element linear elastic stress analysis. Fatigue lifetimes of the steel-sleeve repair welds were evaluated by substituting the derived weld residual stresses and operating stress variations into the structural stress/fracture mechanics approach as input. Parametric study using finite element analysis and fatigue assessment for various repair welding process variables were carried out to investigate the effects of the process variables on the fatigue lifetime. Finally, based on the effects of the process variables on the fatigue lifetime, an optimal process to minimize the welding time and economic costs and to improve the fatigue lifetimes was derived.

• Computers and Concrete
• /
• v.17 no.4
• /
• pp.499-521
• /
• 2016

In this paper, a probabilistic- and finite element-based approach to evaluate and predict the lifetime performance of reinforced concrete (RC) bridges undergoing various maintenance actions is proposed with the time-variant system reliability being utilized as a performance indicator. Depending on their structural state during the degradation process, the classical maintenance actions for RC bridges are firstly categorized into four types: Preventive type I, Preventive type II, Strengthening and Replacement. Preventive type I is used to delay the onset of steel corrosion, Preventive type II can suppress the corrosion process of reinforcing steel, Strengthening is the application of various maintenance materials to improve the structural performance and Replacement is performed to restore the individual components or overall structure to their original conditions. The quantitative influence of these maintenance types on structural performance is investigated and the respective analysis modules are written and inputted into the computer program. Accordingly, the time-variant system reliability can be calculated by the use of Monte Carlo simulations and the updated the program. Finally, an existing RC continuous bridge located in Shanghai, China, is used as an illustrative example and the lifetime structural performance with and without each of the maintenance types are discussed. It is felt that the proposed approach can be applied to various RC bridges with different structural configurations, construction methods and environmental conditions.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.4
• /
• pp.201-208
• /
• 2016

Non-volatile counter is a counter that maintains the value without external power supply. It has been used for the applications related to warranty issues to count and record certain events such as power cycles, operating time, hard resets, and timeouts. It has been conventionally implemented with volatile memory-based counter and battery backup or non-volatile memory such as EEPROM. Both of them have a lifetime issue due to the limited lifetime of the battery and the endurance of the non-volatile memory cells, which incurs significant redundancy in design. In this paper, we introduce a hybrid architecture of volatile (SRAM) and non-volatile memory (EEPROM) cells to achieve required lifetime of the non-volatile counter with smaller cost. We conduct a design space exploration of the proposed hybrid architecture with the parameters of various kinds of non-volatile memories. The analysis result shows that the proposed hybrid non-volatile counter can extend the lifetime up to 6 times compared to the battery-backup volatile memory-based implementation.

• Journal of Applied Reliability
• /
• v.1 no.2
• /
• pp.139-148
• /
• 2001

We are concerned in the estimation of lifetime distribution of a component having a few observed failure data and we demonstrate that we can use the maximum likelihood estimation utilizing the censored data when the number of components in use is quite large. Weibull distribution is assumed for the lifetime and a simple estimation procedure is introduced. We also propose the method of determining the optimal number of spares required for a specified period without introducing cost functions. The proposed methods are applied to the photon stop and the water-cooled flange which are major components in Pohang Light Source.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.82-85
• /
• 2004

Flux-enhancement mechanism of thin-film-composite (TFC) membranes for the reverse comosis (RO) process was newly explained by positron annihilation lifetime spectroscopy (PALS) that has been found to be applied for detecting molecular vacancies or pores having sizes that are equivalent to salt or hydrate ions in RO membrane.(omitted)