• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.2
• /
• pp.78-86
• /
• 2002

In general, X-ray diffraction method detects the changes of crystal lattice under material surface using the angle of diffraction 2$\theta$. This technique which deals with in the presented paper can be applied to a behavior on the slipped band or the micro crack cause to material degradation. The relation between half-value breadth and cycle numbers shows three stages, which consist of rapid decrease in the initial cycle, slight decrease in the middle cycle, and then rapid decrease in the final cycle. The ratio of half-value breadth has a constant value on B/B$\_$0/ - N diagram under the loading condition except early part of fatigue life. The ratio of half-value breadth B/B$\_$0/ - log N$\_$f/ with respect to number of cycle to failure N$\_$f/ has linear behavior on B/B$\_$0/ - log N$\_$f/ diagram. Therefore, the evaluation of fatigue life by the average gradient has much less mean error than the estimation of fatigue life by log B/B$\_$0/ - log N/N$\_$f/ relation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.115-120
• /
• 1997

Environmental Product Life Cycle Management is an activity for defining and describing the product, process or activity environmentally. Especially, the main responsibility for the environmental impact of products lies in the design phase of product. Designers cany a heavy responsibility to determine technical, economic and ecological properties of the product. So in order to help designers, structured understanding and application of treating large amount of data and infonnation should be considered. This paper presents a methodological approach for decision supporting to build Product Life Cycle Management system and show a set of database modeling. Additionally, a key issue for databases is the quality of the provided information.

• Transactions of the Korean hydrogen and new energy society
• /
• v.6 no.1
• /
• pp.35-41
• /
• 1995

The MmNi-based alloy electrode was studied for use as a negative electrode in Ni-MH battery. Alloys with $MmNi_5-_xM_x$(M=Co,Al,Mn) composition were synthesized, and their electrode charateristics of activation rate, temperature dependence, electrode capacity and cycle life were investigated. With increasing Al content and decreasing Mn content in the alloys, the discharge capacity increased while the cycle life decreased. As x in $MmNi_5-_xM_x$ increased from 1.5 to 2.0, decreasing the Ni content, the discharge capacity, the low temperature property and the rate capability decreased. However its cycle life was improved. Increasing Co content resulted in a prolonged cycle life and decrease of high rate discharge capacity. It can be concluded that the most promising alloy in view of discharge capacity and cycle life is $MmNi_{3.5}Co_{0.7}Al_{0.5}Mn_{0.3}$.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.131-138
• /
• 2013

The purpose of this study is to suggest the evaluation standard of cost-effectiveness analysis for renew of architectural equipment in public building. Evaluation items of cost-effectiveness analysis for renew of architectural equipment in public building were used life cycle cost, energy consumption(ton of oil equivalent), green house gas emissions(ton of carbon dioxide) and maximum power demand. Life cycle cost is the process of making an economic assessment of an item, area, system, or facility by considering all significant costs of ownership over an economic life, expressed in terms of equivalent costs. The essence of life cycle costing is the analysis of equivalent costs of various alternative proposals. The social concern with green house gas and maximum power demand of architectural equipment field has been growing for the last several years.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.4
• /
• pp.97-106
• /
• 2002

The purpose of this study is to analyze the life cycle cost of primary cooling system by systematic support cost. Life Cycle Cost(LCC) is the process of making an economic assessment of an item, area, system, or facility by considering all significant costs of ownership over an economic life, expressed in terms of equivalent costs. The essence of life cycle costing is the analysis of equivalent costs of various alternative proposals. In order to select economical primary cooling system in early heat source plan stages, the research investigates cost items and cost characteristics during project process phases such as planning/design, construction, maintenance /management, and demolition/sell phases. The study also analyze the life cycle cost by capacity leading to suggest the most economical primary cooling system by systematic support cost.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.86-89
• /
• 2004

A web-based program life-cycle management(PLM) system is introduced to implement the system engineering processes and to provide the development teaceability online. This information system aims for the realization of essential system engineering management techniques currently applied to the space launch system development program including management of configuration and data based on the work breakdown structure(WBS), WBS, bill of materials and properties. The system enhances communication and gives access to the development data with relevant information such as data-to-data relation and approval status/history through the web, and preserve all of the development data throughout the program life-cycle. Further improvement of the system is planned to implement the program managrment pricesses and to provide integrated information useful for the programmatic decision making.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1569-1570
• /
• 2011

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.69-79
• /
• 2017

In this paper, we propose our four-phase life cycle of P2P botnet with corresponding detection methods and the future direction for more effective P2P botnet detection. Our proposals are based on the intensive analysis that compares existing P2P botnet detection schemes in different points of view such as life cycle of P2P botnet, machine learning methods for data mining based detection, composition of data sets, and performance matrix. Our proposed life cycle model composed of linear sequence stages suggests to utilize features in the vulnerable phase rather than the entire life cycle. In addition, we suggest the hybrid detection scheme with data mining based method and our proposed life cycle, and present the improved composition of experimental data sets through analysing the limitations of previous works.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.387-390
• /
• 2008

The importance of the life cycle cost analysis for construction projects of bridge has been recognized over the last decades. Accordingly, theoretical models, guidelines, and supporting softwares have been developed for the life cycle cost analysis of bridges. However, it is difficult to predict life cycle cost considering uncertainties precisely. This paper presents methodology for optimal design of substructure for a steel box bridge. Total life cycle cost for the service life is calculated as sum of initial cost, damage cost considering uncertainty, maintenance cost, repair and rehabilitation cost. The optimization method is applied to design of a bridge substructure with minimal cost, in which the objective function is set to life cycle cost and constraints are formulated on the basis of Korean Bridge Design Specification. Initial cost is calculated based on standard costs of the Korea Construction Price Index and damage cost on the damage probabilities to consider the uncertainty of load and resistance. An advanced first-order second moment method is used as a practical tool for reliability analysis using damage probability. Maintenance cost and cycle is determined by a stochastic method and user cost includes traffic operation costs and time delay costs.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.168-176
• /
• 2014

The enterprise life cycle derived from the product life cycle consists of introduction, growth, maturity and decline. The enterprise tries to reach the growth stage early and stay at the maturity stage stably through expanding its businesses and investing for the new technology. The public enterprise is not different but its life cycle is more prone to be affected by the national development and policy. A typical example can be found in the case of the quasi market SOC public enterprise which spends massive amount of fund to provide social infrastructure. After the fulfillment of its mandated mission it is exposed to the pressure of a merger or a closure usually because large portion of the debt is directly linked to the national financial stability and credit ratings. This research is focused on the variables that influence the life cycle of the quasi market SOC public Enterprise for its future competitiveness is in connection with its normalization, advancement and rationalization. In this respect, categorical variables system centering on public characteristics and profitability drew eight categorical variables such as policy outcomes, public benefit, finance and business values etc.