• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.259-262
• /
• 2009

The influence of pre-strain in low-cycle fatigue behavior of Fe-18Mn-0.05Al-0.6C TWIP steel was studied by conducting axial strain-controlled tests. As-received plates were deformed by rolling with reduction ratios of 10 and 30%, respectively. A triangular waveform with a constant frequency of 1 Hz was employed for low cycle fatigue test at the strain amplitudes in the range of ${\pm}0.4{\sim}{\pm}0.6$ pct. The results showed that low-cycle fatigue life was strongly dependent on the amount of pre-strain as well as the strain amplitude. Increasing the amount of prestrain, the number of reversals to failure was significantly decreased at high strain amplitudes, but the effect was negilgible at low strain amplitudes. A new model for predicting fatigue life of pre-strained body has been devised adding a correction term of ${\Delta}E_{pre-strain}$ to the energy-based fatigue damage parameter.

• 열처리공학회지
• /
• 제32권1호
• /
• pp.12-16
• /
• 2019

In this study, strain-controlled low cycle fatigue test for hot rolled STS304 steel was carried out at $400^{\circ}C$ and $600^{\circ}C$, respectively. High temperature fatigue test was done using an electric furnace attached on the hydraulic fatigue test machine. The results of this study show that STS304 hot rolled steel has excellent static strength and fatigue characteristics. The hysteresis loop at half life was obtained in order to calculate the elastic and plastic strain. Also, Relationship between strain amplitude and fatigue life was examined in order to predict the low cycle fatigue life of STS304 steel by Coffin-Manson equation.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 춘계학술대회
• /
• pp.309-322
• /
• 2007

This paper shows application guide of dependability data from the field, life cycle costing, and maintainability. Moreover, this study introduces mathematical expressions and predictions for reliability, availability and maintainability. This paper also shows compliance test procedures for steady-state availability, and application of Markov techniques.

• 디지털콘텐츠학회 논문지
• /
• 제15권2호
• /
• pp.301-308
• /
• 2014

최근에 데이터가 대용량화됨에 따라 정보 저장의 중요성이 부각되고 있다. 본 연구는 대용량 저장장 치에 많이 사용되는 2.5인치 HDD에 대해서 가속 시험결과를 토대로 연간 제품 고장률을 예측하고 사용 환경에 대한 연간 제품 고장률과의 차이를 최소화 시키는 새로운 방안을 제시하고자 한다. 반품된 2.5인치 HDD 309개의 정보를 분석하여 실사용 환경의 시간당 전송량을 구했고, 가속 수명시험으로부터 가속 시험조건의 시간당 전송량을 구한 후, 사용률에 대한 가속 계수를 산출했다. 온도에 대한 가속 계수, 사용률에 대한 가속 계수와 고장률로 연간 제품 고장률을 예측하였다. 가속 시험의 시간당 전송량 81.4GB/hour와 사용자 93.4 %까지 대표하는 실사용 환경의 시간당 전송량은 5.8 GB/hour로 산출한 사용률에 대한 가속 계수는 14.1이다. 실사용 환경의 연간 제품 고장률은 1년 이후 안정화 되었으며, 이때 연간 제품 고장률은 0.3~0.378 % 이내에서 변동 하였다. 본 연구를 통하여 예측된 연간 제품 고장률은 0.4 %로 실사용 환경의 연간 제품 고장률과 75~94%의 일치됨을 보였다. 본 연구는 제조사의 가속수명 결과로 실사용 환경을 연간 제품 고장률을 예측하는 방법에 영향을 줄 것이다.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.133-141
• /
• 2006

The Low cycle fatigue behavior of 11.7Cr-1.1Mo heat-resisting steel has been investigated under strain-controlled conditions with mean stresses at room temperature and $300^{\circ}C$. For the tensile mean stress test, the initial high tensile mean stress generally relaxed to zero at room temperature, however, at $300^{\circ}C$ initial tensile mean stress relaxed to compressive mean stress. Low cycle fatigue lives under mean stress conditions are usually correlated using modifications to the strain-life approach. Based on the fatigue test results from different stain ratio of -1, 0, 0.5, and 0.75 at room temperature and $300^{\circ}C$, the fatigue damage of the steel was represented by using cyclic strain energy density. Total strain energy density considering mean stress indicated well better than not considering mean stress at $300^{\circ}C$. Predicted fatigue life using Smith-Watson-Topper's parameter correlated fairly well with the experimental life at $300^{\circ}C$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.178-183
• /
• 2004

For developing fatigue design curve of cast stainless steels that would be used in piping material of domestic nuclear power plants, a low-cycle fatigue test rig was built. It is capable of performing tests in pressurized high temperature water environment of PWR. Cylindrical specimens of CF8M were used for the strain-controlled environmental fatigue tests. Fatigue life was measured in terms of the number of cycles with the variation of strain amplitude at 0.04%/s strain rates. The disparity between target length and measured length of specimens was corrected by using finite element method. The corrected test results showed similar fatigue life trend with another previous results.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권2호
• /
• pp.95-103
• /
• 2018

Purpose: Environment test aim to validate the guarantee of required capability of materiel against various environment conditions which exposed during materiel life-cycle. In this paper, environment test design procedure and tailoring guideline for Korean peninsula and periphery climate are proposed. Methods: To design tailoring guideline, climate data which are regarding Korean peninsula and periphery regions provided from Korea Meteorological Administration (KMA) and National Climatic Data Center (NCDC) are used. Conclusion: For effective environment test, it is important that environment test have to design in considering environment conditions during materiel life-cycle. It is concluded that the high temperature test level can be softer than the test criteria in MIL-HDBK-310, however, the low temperature test level will be expected to be $2{\sim}6^{\circ}C$ harsher than MIL-HDBK-310.

• 가정과삶의질연구
• /
• 제7권1호
• /
• pp.1-14
• /
• 1989

The purpose of this study was to identify the problems in the consumption life of household over the family life cycle so that they would support to select the consumer education subjects and the establish the long-term household plan. For these purposes, a survey was conducted using questionnaire. The data used in this study included 562 homemakers living in Seoul. Statistics used for data analysis were frequency distribution, Mean, Percentile, One-way Anova, Scheffie-test, Multiple Classification Analysis. Major findings were as follows; 1) In the level of the problems in the consumption life of household, housing problem, durable goods problem, healthy-medical problem and child education problem area were in the low level. Leisure problem and properties management problem area were in the high level. 2) The problems in the consumption life of household differed significantly over the family life cycle. 3) When controlling family monthly income and education level of husband was compared with not-controlling them, the influences of family life cycle on the problems in the consumption life were as follows. (1)At housing problem area, the effect of the FLC was higher in controlling them than not-controlling them. (2) At other problems the effects of the FLC was lower or same in controlling them than not-controlling them.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.199-208
• /
• 1997

A local strain approach was applied to an external single and double grooved C-shaped specimen in order to evaluate and predict the fatigue crack initiation life by using low cycle fatigue properties. The low cycle fatigue properties were determined from the strain-controlled fatigue tests using smooth cylindrical axial specimens. Fatigue crack initiation life was evaluated by a life prediction software, FALIPS, based on the local strain approach. The fatigue life was significantly influenced by the mean stress, and SWT parameter represented the fatigue life effectively. The predicted fatigue crack initiation life was then compared to the experimental fatigue life evaluated from the C-shaped fatigue test specimens. A good correlation was found between the experimental and predicted fatigue lives within factors of 2 and 4 for the single and double grooved C-shaped specimens respectively. Also, experimental fatigue life of the double grooved specimen was 10-12 times longer than that of the single grooved specimen.

• 산업공학
• /
• 제18권4호
• /
• pp.477-484
• /
• 2005

This paper is concerned with the life-cycle cost(LCC) of the urban transit system which was developed by KRRI and is now under test in Gyeongsan, Korea. Its reliability, availability and maintainability(RAM) were analyzed. LCC is the core part of analyzing the total cost of acquisition and ownership of a system. LCC analysis of a system is the most effective when it is applied in the it's early design phase. In this paper, we present IEC 60300-3-3(Life Cycle Costing) in detail and propose how to apply LCC in assessing the urban transit system according to RAM process. This case study demonstrates that reliability management system is very effective in reducing the operating cost of subway corporations in Korea.