• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.75-78
• /
• 2000

There are several effective factors to influence die life in the warm forging process. For instance process design die design and die materials etc This study presented heat treatment method which could improve toughness and wear resistance simultaneously in high temperature to apply high speed tool steels like SKH51 to die material for warm forging process. To verify the feasibility of application of heat treatment method mentioned above wear test was performed under the condition of constant time in 40$0^{\circ}C$ Wear coefficient was examined to search a relation between wear amount and time for each material and heat treatment method in 30, 60, and 130 minutes. To quantify the toughness-behavior between room and high temperature impact test was performed and heat fatigue test also fulfilled to compare with the resistance of heat check in room, 200, 400, and $600^{\circ}C$ temperature. On the basis of experimental results mentioned above high speed tool steel was applied to verify appropriateness of newly proposed heat treatment method for die of rotor pole used in automobile alternator. As a result die life of high speed tool steel applied newly proposed heat treatment is longer than that of STD61.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.64-69
• /
• 2014

Gr. 91 steel is used for the major structural components of Generation-IV reactor systems, such as a very high temperature reactor(VHTR) and sodium-cooled fast reactor(SFR). Since these structures are designed for up to 60 years at elevated temperatures, the prediction of long-term creep life is important for a design application of Gr. 91 steel. In this study, a number of creep rupture data were collected through world-wide literature surveys, and using these data, the long-term creep life was predicted in terms of three methods: the single-C method in Larson-Miller(L-M) parameter, multi-C constant method in the L-M parameter, and a modified method("sinh" equation) in the L-M parameter. The results of the creep-life prediction were compared using the standard deviation of error value, respectively. Modified method proposed by the "sinh" equation revealed better agreement in creep life prediction than the single-C L-M method.

• International Journal of Reliability and Applications
• /
• 제15권2호
• /
• pp.85-98
• /
• 2014

Accelerated life testing (ALT) is a well famous technique in life testing and reliability studies, this is particularly used to induce so high stress leading to failure of the highly reliable units quickly under stipulated duration of time. The step-stress ALT is one of the systematic experimental strategy of ALT applied to fail the units in steps. In this article we focus on two important issues (i) necessity of life tests at higher steps with relevant causes (ii) to develop a new optimum test plan for 3-step SSALT under the modified cumulative exposure model proposed by Khamis and Higgins (1998). It is assumed that the lifetime of test units follows Rayleigh distribution and its scale parameter at constant stress level is assumed to be a log-linear function of the stress. The maximum likelihood estimates of the parameters involved in the step-stress ALT model are obtained. A simulation study is performed for numerical investigation of the proposed new optimum plan 3-step, step-stress ALT. The necessity of the life test units at 3-step step-stress is also numerically examined in comparison to simple step-stress setup.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.90-97
• /
• 1993

1. Average moisture content of tobacco in BIB silo was about 19: 1% until 4hours conditioned time, and then moisture variation of tobacco after 2hr conditioned was very small. 2. Application of mathematical model for ordering system. 1) The constant K in the exponential equation varies inversely with both relative humidity and equilibrium moisture. 2) Time needed to order blending tobacco leaves with standard moisture from bulking and blending silo was 4 hours. 3) Reconstituted tobacco sheet had higher moisture absorption ratio than Oriental and Burley tobacco. 4) For minimize of conditioning time in BIB silo, the values of K and Mo given in this study can be used in equation(1) to calculate moisture absorption ratio and optimum conditioning time. 3. Average moisture content and water activity of conditioned tobacco for 4 hours in BIB silo was about 20% and 0.65. In this condition. microbial life will inhibite 4. Physical properties of conditioned tobacco in bulking and blending silo for 4hours was virtually no change.

• 조명전기설비학회논문지
• /
• 제15권5호
• /
• pp.55-60
• /
• 2001

현재 대부분의 전동지게차 충전기는 3상의 일정전류제어와 일정전압제어 방식으로 운전되고 있으며, 이러한 충전방식은 충전기의 이용률을 저하시킬 뿐 아니라 축전지의 수명을 단축시키는 등의 단점을 가지고 있다. 이러한 문제점을 보완하기 위해서, 본 논문에서는 기존의 방식에서 일정전력제어 및 부가적인 제어모드를 첨가한 다중제어 충전방식을 제시하였다. 전체 제어시스템은 저가의 micro-controller를 적용하여 디지털화 시킴으로써 제어정도 및 신뢰성을 향상시켰으며, 제어장치의 소형화와 함께 저 가격화를 실현하였다.

• 한국임상약학회지
• /
• 제9권2호
• /
• pp.92-96
• /
• 1999

The pharmacokinetics of carbamazepine(100 mg/kg, oral) in the folic acid-induced renal failure rabbits was studied. Renal failure was induced by the i.v. injection of folic acid (50, 100, and 200 mg/kg). At folic acid dose of 100 and 200 mg/kg, the serum creatinine concentration (Scr) and blood urea nitrogen (BUN) increased significantly compared with control rabbits. Plasma concentrations and area under the plasma level-time curve (AUC) of carbamazepine increased significantly at folic acid dose of 100 and 200 mg/kg. The elimination rate constant (Kel) of carbamazepine decreased significantly, and half-life $(t_{1/2})$ of carbamazepine increased significantly at folic acid dose of 100 and 200 mg/kg. The serum creatinine concentration (Scr) correlated well with AUC and elimination rate constant (Kel) of carbamazepine, as well as BUN with AUC and elimination rate constant (Kel) of carbamazepine. These results suggest that adjustment of the dosage regimen of carbamazepine is desirable, and serum creatinine concentration (Scr) as well as BUN can be used for adjusting the dosage regimen of carbamazepine in renal failure.

• Nuclear Engineering and Technology
• /
• 제10권4호
• /
• pp.195-201
• /
• 1978

감마선을 이용하여 폴리에스터직포에 methacylic acid와 methyl methacylate를 graft 종합반응시켜서 그 반응성을 보았다. 폴리에스터직포에 acrylic acid, methacrylic acid, methyl methacrylate를 중합반응 시켰을 때 graft 효율은 monomer 혼합용액내에 포함되어 있는 용매의 dielectric constant에 따라 상당한 차이를 나타내었다. Graft 수율은 방사선 선량과 monomer 농도 및 swelling agent의 농도에 좌우되었다. MA graft copolymer의 glass transition temperature (101$^{\circ}C$)와 melting point (238$^{\circ}C$)를 측정하였고, 정전기 효과는 frictional electricity 8,000V에서 half life가 0 sec이었으며, moisture regain는 5.6%, wicking time은 1 sec이었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.148-148
• /
• 2017

Surface modification is a type of mechanical manipulation skills to achieve extensive aims including corrosion control, exterior appearance, abrasion resistance, electrical insulation and electrical conductivity of substrate materials by generating a protective surface using electrical, physical and chemical treatment on the surface of parts made from metallic materials. Such surface modification includes plating, anodizing, chemical conversion treatment, painting, lining, coating and surface hardening; this study conducted cavitation experiment to assess improvement of durability using anodizing. In order to observe surface characteristics with applied current density, the electrolyte temperature, concentration was maintained at constant condition. To prevent hindrance of stable growth of oxide layer due to local temperature increase during the experiment, stirring was maintained at constant speed. In addition, using galvanostatic method, it was maintained at processing time of 40minutes for 10 to $30mA/cm^2$. The cavitation experiment was carried out with an ultra sonic vibratory apparatus using piezo-electric effect with modified ASTM-G32. The peak-to-peak amplitude was $30{\mu}m$ and the distance between the horn tip and specimen was 1mm. The specimen after the experiment was cleaned in an ultrasonic bath, dried in a vacuum oven for more than 24 hours, and weighed with an electric balance. The surface damage morphology was observed with 3D analysis microscope. As a result of the study, differences were observed surface hardness and anti-cavitation characteristics depending on the development of oxide film with the anodizing process time.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.646-649
• /
• 2007

The effect of the addition of 2 kinds of chemically modified starches (the anti-caking agents; tapioca starch and com starch) on caking of ramen soup was observed using a low-resolution proton-pulsed nuclear magnetic resonance (NMR) technique. After storing ramen soup samples with diverse compositions of modified starch at 20-40% relative humidity for 4 weeks, changes in the spin-spin relaxation time constant ($T_2$) were measured as a function of temperature. $T_2-Temperature$ curves for ramen soup containing modified starches showed that the caking initiation temperature (glass transition temperature) was increased by $5^{\circ}C$ following the addition of only 0.5% modified cornstarch. The results indicate that the modified com starch used in this study would be an effective anti-caking agent for ramen soup, thus prolonging the shelf life of the product.

• 열처리공학회지
• /
• 제22권4호
• /
• pp.228-233
• /
• 2009

In order to predict the temperature distribution of stainless steel strip in Bright Annealing (BA) furnace, we performed the analysis of heat transfer and fluid flow using STAR-CCM+. The analysis model included unsteady fluid flow, heat transfer with radiation and moving grid. Two kinds of radiative properties, emissivity and reflectivity, were applied to the stainless steel strip, one is constant and the other is variable with time. As we call, the BA furnaces of stainless steel strip have two different types, muffle and no-muffle. The using of muffle type has been faced with some problems such as rising in material price and shortening of life cycle, etc. So the development of no-muffle type BA furnace is very important in order to save energy cost, lower environmental load and increase the productivity. The designed (or expected) temperature of stainless steel strip coming out of BA furnace was about $1065^{\circ}C$ while the environment temperature maintains around $1100^{\circ}C$. The result of our calculation was very close (or similar) to design temperature, and the application of radiative properties variable with time produced more accurate result than applying constant ones.