• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.520-524
• /
• 2005

It is consequential to reduce the environmental impact of a product for sustainable development in 21st Century. In the field of transportation, especially, the technological market concerned about reduction and assessment of greenhouse gas emission is expected to be extended. The LCA gas been esteemed and utilized as a realistic alternative greenhouse gas emission is expected to be extended. The LCA has been esteemed and utilized as a realistic alternative to improve the environment by the assessment of environmental impacts. In this study, simplified life cycle assessment(S-LCA), was performed to analyze the environmental impacts quantitatively, which were produced through the life cycle of a electric motor unit(EMU). The object of the present work is rth investigate main parameters of environmental impacts and to establish the plans to improve the environment impact of EMU. As a result of quantitative assessment for environmental impact and manufacturing, the EMU carbody made of SUS showed acidification(AD) and marine water aquatic ecotoxicity(MAET) the most, while that made of Mild showed high impact of global warning(GW) and abiotic resources depletion(ARD). For the SUS EMU, the high AD and MAET impact is occurred by the discharged pollutants during acid-washing process. Also, high value of GW and ARD for Mild EMU is resulted from the consumption of iron ore, coal and crude oil during manufacturing. Therefore, the environment impact of carbody would be decreased by enhancing of energy efficiency and the lightening the weight of it.

• Journal of Biosystems Engineering
• /
• 제29권6호
• /
• pp.521-530
• /
• 2004

The solar powered water pump is very ideal equipment because solar power is more intensive when the water is more needed in summer and it is very helpful in the rural area, in which electrical power is not available. The average solar radiation power is $3.488\;kWh/(m^2{\cdot}day)$ in Korea. In this study, the experimental system of the water pump driven by the radiation energy were designed, assembled, tested and analyzed fur realizing the solar powered water pump. Energy conversion ken radiation energy to mechanical energy by using n-pentane as operating material was done and the water pumping cycles were able to be continued. The quantity of the water pumped per cycle ranged from 2 L to 10 L depending on the level of the valve open area far the vapour supply. The average quantity was about 4,366 cc. The thermal efficiency was about $0.018\%$. The pressure level of the n-pentane vapour in flash tank was about $110\~150\;kPa$ and that in the water tank was $93\~130\;kPa$. The pressure in the condenser during cycles was maintained as about 70 kPa. The condensation of the n-pentane vapour in the water tank was increased with the cycles even though the internal and external insulation were done. Air tank performance was better with increasing of the water piston displacement and the water could be pumped with the water piston displacement becoming higher than 6,500 cc.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.589-593
• /
• 2007

Due to sustainable development, international environmental regulations have been reinforced continuously. Especially, Kyoto protocol related to energy consumption affects to national production system seriously. Even if railroad is the most environmental- friendly transportation, it is necessary to improve its environment. Life cycle assessment (LCA) is a representative tool to evaluate the environment impacts of a product. In the EU's railroad companies, the recycling efficiency and the waste emissions of rolling stocks have improved considering their environment impacts with LCA from a design step. Also, the LCA system of Korean electric motor units has been developed to build an environmentally sound railroad as one of national transportation core technology R&D projects. Therefore, the introduction of LCA will be required to decrease environmental impacts released from rolling stocks in the future.

• 한국산업정보학회논문지
• /
• 제20권5호
• /
• pp.107-115
• /
• 2015

Residential building owners are turning toward renovating their existing buildings to improve old and inefficient HVAC systems. Due to the renovation, much of the added costs will inevitably be passed on to tenants by increasing rent rates. This increment often increases the vacancy rate in the buildings. To balance the interests of both owners and tenants, this paper suggested a method to determine an appropriate rental rate increment for the HVAC system renovation. A case study on residential buildings was conducted to determine a balanced point where the rental rate increment that offsets the amount tenants are willing to pay for the renovation. To calculate all costs incurred by the renovation, life-cycle cost analysis was carried out. Therefore, this paper ultimately provides a threshold value of rental rate increment such that building owners can make a reasonable decision on the HVAC system renovation.

• Advances in Energy Research
• /
• 제6권1호
• /
• pp.1-15
• /
• 2019

The objective of the study is to examine the relationship between water resources, energy demand, food production, and environmental pollutants in selected SAARC nations, namely, Bangladesh, India, Pakistan, and Sri Lanka, during the period of 1990-2016. The results show that water, energy, and food (WEF) resources substantially affected air quality in the form of high mass carbon emissions, fossil fuel energy demand, methane discharges, nitrous oxide emissions, and greenhouse gas emissions in these countries. Food production and food deficit largely increase $CO_2$ emissions due to unsustainable production and malnutrition, while land use under cereal production increases $CH_4$ and $N_2O$ emissions. Electricity production escalates $CO_2$ emissions and fossil emissions across countries. The results support the carbon EKC hypothesis, while monotonic increasing function exists in case of fossil fuel energy. The study emphasizes the need to ensure environmental sustainability agenda by adopting cleaner production technologies in WEF resources.

• 설비공학논문집
• /
• 제26권8호
• /
• pp.357-365
• /
• 2014

This paper proposed a multi-objective optimization method for building energy system design using primary energy consumption and initial cost. The designing of building energy systems is a complex task, because life cycle cost and efficiency of building are determined by decisions of engineer during the early stage of design. Therefore, methods such as pareto analysis that can generate various alternatives for decision making are necessary. In this study, the optimization is performed using the NSGAII and case study was carried out for feasibility of the proposed method. As a result, alternative solutions can be obtained for the optimal building energy system design.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.144-148
• /
• 2005

The industrial development of large scale deep bed filters has been a very important step in the process of drinking water production and more recently in the tertiary treatment of wastewater. The target of deep bed filtration is the retention is the retention of small particles generally smaller than 30 microns at relatively small concentration, generally less than 30 mg/l from natural water (surface water or aquifers) or secondary treated wastewater. The relation between the retention efficiency and the characteristics of the particles has been extensively studied experimentally and through different models of retention. During the last years the development of new technologies (fiber filter, membrane modules) lead to more intensive processes compared to conventional sand filtration. Fiber filters can combine intensification with a decrease in specific energy needed however they cannot be operated under gravity like sand filters. Membrane filters (UF or MF) are much more intensive and efficient than sand filters. The specific energy needed is not so high (about $0.1Kwh/M^3$) but is higher than sand or fiber filter. A Life Cycle Analysis (LCA) has to be made for a complete comparison between these technologies taking in account that the efficiency of particle retention obtained by membrane filters is unique.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2008년도 추계 공동 국제학술대회
• /
• pp.507-511
• /
• 2008

Supporting energy efficiency and load balancing in wireless sensor network is the most important issue in devising the hierarchical routing protocols. Recently, the dual layered clustering scheme with GPS was proposed for the supporting of load balancing for cluster heads but there would be many collided messages in the overlapped area between two layers. Thereby, the purpose of this paper is to reduce the collision rate in the overlapped layer by concisely distinguish them with the same number of nodes in them. For the layer partition, this paper uses an equation $x^2+ y^2{\le}(\frac{R}{\sqrt{2\pi}})^2$ to distinguish layers. By using it, the scheme could efficiently distinguish two layers and gets the balanced number of elements in them. Therefore, the proposed routing scheme could prolong the overall network life cycle about 10% compared to the previous two layered clustering scheme.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.169-173
• /
• 2008

Stirling engine is a promising heat engine with a high efficiency, muti-fuel capability, low emission, quiet operation, very low maintenance and long life. As one of the promising applications, solar power system based on the Stirling dish, providing net solar-to-electric conversion efficiencies reaching 30%, can operate as stand-alone units in remote locations or can be linked together in groups to provide utility-scale power. This paper introduced a new Scroll-type Stirling engine, being developed for solar power, superior to conventional Stirling engines. The Scroll-type Stirling engine is characterized as traits of continuous and wholly separated compression and expansion; one-way flow system; direct cooling and heating the fluid in the working spaces through the extensive inner surfaces of scroll wraps. All theses traits contribute to achieving thermodynamic cycle closer to the ideal Stirling cycle (exactly speaking, Ericsson cycle).

• Journal of Information Processing Systems
• /
• 제16권1호
• /
• pp.1-5
• /
• 2020

Sustainable computing is a rapidly expanding field of research covering the fields of multidisciplinary engineering. With the rapid adoption of Internet of Things (IoT) devices, issues such as security, privacy, efficiency, and green computing infrastructure are increasing day by day. To achieve a sustainable computing ecosystem for future smart cities, it is important to take into account their entire life cycle from design and manufacturing to recycling and disposal as well as their wider impact on humans and the places around them. The energy efficiency aspects of the computing system range from electronic circuits to applications for systems covering small IoT devices up to large data centers. This editorial focuses on the security, privacy, and efficiency of sustainable computing for future smart cities. This issue accepted 17 articles after a rigorous review process.