• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.3
• /
• pp.309-314
• /
• 2006

The present investigation was undertaken to study the milkability characteristics of Holstein cows. Out of 6,660 initial records 4,607 records were finally included in the analysis after deleting some records with an abnormal range of values for the traits considered. These 4,607 Holstein cows belonged to a total of 122 herds located in a province in Korea. The 'LactoCorder' instrument was used to electronically record the milkability traits at the milking parlor. A total of 19 traits were studied which were broadly classified into milk yield, milking speed, milking time and the electrical conductivity related traits. The SAS 9.1 statistical software was used to carry out analyses. The average maximum milk flow per minute was 3.21 kg/min, while the average milking speed during the main milking process (DMHG) had a mean value of 2.30 kg/min. The total milk yield was 14.14 kg, 62% of which was milked during the first three minutes of the milking. The average total milking time was 8.23 min. Among the three phases of the main milking process, the time of stable milk flow had the longest time (2.97 min) followed by the time at the decline phase (2.62 min). The average time taken to reach the plateau phase was 1.08 min, which can still be reduced further through improved managemental practices. Among milk yield traits, milk yield during the first two (MG2) and three (MG3) minutes of milking had high positive correlation with milking speed traits and negative correlations with almost all the milking time traits except time of incline in milk flow from 0.5 kg/min till the attainment of the plateau phase (tAN). Milking speed traits had negative correlations with total milking time, time at main milking process, time at plateau and with the time at decline. Since there was medium to high negative correlation between the milking speed and the time at plateau, there is a need for selection of cows which have intermediate milking speed so that it could require less milking time and also the optimum (higher and longer) plateau time. Proper pre-stimulation and avoiding over milking will help in further reducing the milking time and thus will add to the net profit of the farmer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2122-2129
• /
• 2002

Creep damage using a reference stress(RS) was analyzed for type 316LN stainless steel. The generalized K-R equation was reconstructed into the RS equation using a critical stress value $\sigma$. The RS equation was derived from the critical stress in failure time $t_f$ instead of material damage parameter $\omega$, which indicates the critical condition of collapse or approach to gross instability of materials during creep. For obtaining the reference stress, a series of creep tests and tensile tests were conducted with at 55$0^{\circ}C$ and $600^{\circ}C$. The stress-time data obtained from creep tests were applied to the RS equations to characterize the creep damage of type 316LN stainless steel. The value of creep constant r with stress levels was about 18 at 55$0^{\circ}C$ and 21 at $600^{\circ}C$. This value was almost similar with r = 24 in the K-R equation, which was obtained by using damage parameter $\omega$. Relationship plots of creep failure strain and life fraction $(t_f /t_r)$ were also obtained with different λ values. The RS equation was therefore more convenient than the generalized K-R equation, because the measuring process to quantify the damage parameter $\omega$ such as voids or micro cracks in crept materials was omitted. The RS method can be easily used by designers and plant operator as a creep design tool.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.3
• /
• pp.141-147
• /
• 2018

In a time when product development cycles are getting shorter and shorter, many companies are making efforts to develop products with high reliability in a short period of time, accelerated life test is widely used as a method to quickly evaluate reliability. Accelerated life test reduces the test life or the life of the product from the observed data by shortening the lifetime of the product or abruptly lowering the performance under the worse condition than the actual condition in order to shorten the test cost or the test time. In this paper, BL3640A-06P+RB35, DC12V model, which is used in the support device of an automatic rotation type digital signage, which display various information such as textures and images on a display screen in a public place or a commercial space, BLDC motors were subjected to a constant stress test and at the rotational speed of 1rpm, $180^{\circ}$ rotation and reverse rotation under actual use conditions, the stress was imposed on the rotating speed of 2rpm and the weight of the actual installed product from 22.2kgf to 10kgf were installed. The lifetime of the actual use environment condition is 23,545 hours and the rotation speed is accelerated. The life time of the acceleration condition with the additional weight is 1,380 hours. The acceleration factor is calculated as 17.06, the one year guarantee test day is 235 days to 14 days, of the period from 470 days to 28 days, and the third year from 704 days to 42 days. The test date of the BLDC motor was tested on the shortened test date, and the rotational speed and the current value were measured. It is found that there is no defect even if it operates as the test date corresponding to the specified one year warranty period and the 3 year accelerated life test which is experimented. Using the statistical technique of the regression analysis the expected time for the motor to defect to #4 samples was 20 years.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.1
• /
• pp.159-171
• /
• 2017

The purpose of this study is to investigate the effects of e - commerce technology characteristics and personal values on purchasing behavior by information security importance. The results of the empirical study that examined the university students in 2006 and 2016 are as follows. First, personal value is centered on personal values, such as self - esteem and self - esteem in 2006. In 2016, however, personal values such as self - fulfillment and personal relationship with others are important. Transactional ease and product service serve as the main value of the fun and pleasure of life, but the sense of accomplishment as the core value of information protection. Second, the technical characteristics of e-commerce are as follows. In terms of ease of transaction and product service, technology characteristics are simplified and directly effected over time. On the other hand, information protection works very closely with individual value, There was a strong tendency to enjoy benefits. Especially in 2006, if you want to enjoy transactional convenience through transaction information security or benefit from product service, it has been changed to recognize the importance of information security through payment in 2016.

• The Journal of Asian Finance, Economics and Business
• /
• v.1 no.4
• /
• pp.5-13
• /
• 2014

This study contributes to addressing the problem of an aging population by providing important information that determines feasible monthly payments for the clients of Chinese reverse mortgage products and by promoting the implementation of reverse mortgages in China. The variables used in this study include mean values obtained from time series data, of the rate of increase of housing prices, and the probability value, interest rate, and mortality rate obtained through the geometric Brownian motion (GBM). For mortality rates, China Life Insurance female mortality rates (2000-2003) were used. This study aims to apply the main variables that affect reverse mortgage products in a monthly payment model based on Chinese financial market conditions, and determine loan values. In this study, Shanghai's reverse mortgage monthly payments, by age levels, were calculated through the loan-to-value (LTV) and payment (PMT) methods to evaluate the value of the reverse mortgages. Based on the optimal combination of the three factors of payment amount, loan interest rates, and the level of acceptance of prices, efforts must be made to extract the best value for the elderly. Only in this way can the interests of both lenders and borrowers be protected, by increasing the market share and economies of scale of the reverse mortgage industry and effectively improving the living standards of the elderly.

• Journal of Veterinary Science
• /
• v.21 no.3
• /
• pp.35.1-35.11
• /
• 2020

Background: Despite common use of tylosin in turkeys, the pharmacokinetic (PK) data for this drug in turkeys is limited. Within a few months of growth, PK of drugs in turkeys undergoes changes that may decrease their efficacy due to variable internal exposure. Objectives: The objective of this study was to investigate the influence of age on the PK of a single intravenous (i.v.) and oral administration of tylosin to turkeys at a dose of 10 and 50 mg/kg, respectively. Methods: Plasma drug concentrations were measured using high-performance liquid chromatography with UV detection. The PK parameters were assessed by means of non-compartmental approach and were subjected to allometric analysis. Results: During a 2.5-month-long period of growth from 1.4 to 14.7 kg, the median value for area under the concentration-time curve after i.v. administration increased from 2.61 to 7.15 mg × h/L and the body clearance decreased from a median of 3.81 to 1.42 L/h/kg. Over the same time, the median elimination half-life increased from 1.03 to 2.96 h. For the oral administration a similar trend was noted but the differences were less pronounced. Bioavailability was variable (5.76%-21.59%) and age-independent. For both routes, the plasma concentration of the major tylosin metabolite, tylosin D, was minimal. Protein binding was age-independent and did not exceed 50%. Allometric analysis indicated a relatively poor predictivity of clearance, volume of distribution and elimination half-life for tylosin in turkeys. Conclusions: Age has a significant impact on tylosin PK in turkeys and dosage adjustment may be needed, particularly in young individuals.

• Microbiology and Biotechnology Letters
• /
• v.28 no.1
• /
• pp.52-58
• /
• 2000

The effect of fivrinolytic enzyme produced from Bacillus subtilis K-54 on the thrombosis and stress in vivo was investigated. Each partially purified fibrinolytic enzyme of 4 protein casein unit was administered orally for 3 days before intravenously injection with collagen and epinephrine. In the mice group administered with the enzyme and increased life span of mice was observed in comparison with that of control. The result suggest that the enzyme may prevent the formation of thrombos in vivo. Administration of the enzyme did not influence to stress itself because 5-hydroxyindoleacetatic acid concentration of brain in the mice group with stress did not decreased after the administration of the enzyme. The value of lipid peroxide (LPO) of the liver and brain cells in the group treted with the enzyme was lower than that of control. However, protein degradation (PDP value showed no significant difference between treatment and control groups. In addition, the value of activated partial thromboplastin time (APTT), protrombin time (PT0 and antiplasmin in blood were higher in the stress group than that of the enzyme treated group.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.243-251
• /
• 2008

Magnesium alloys become popular research topic in last decade due to its light weight and relatively high strength-to-weight ratio in the energy aspiration age. Almost all structure materials are supposed to suspend stress. Magnesium is quite sensitive to corrosive environment, and also sensitive to environmental assisted cracking. However, so far we have the limited knowledge about the environmental sensitive cracking of magnesium alloys. The corrosion fatigue (CF) test was conducted. Many factors' effects, like grain size, texture, heat treatment, loading frequency, stress ratio, strain rate, chemical composition of environment, pH value, relative humidity were investigated. The results showed that all these factors had obvious influence on the crack initiation and propagation. Especially the dependence of CF life on pH value and frequency is quite different to the other traditional structural metallic materials. In order to interpret the results, the electrochemistry tests by polarization dynamic curve and electrochemical impedance spectroscopy were conducted with and without stress. The corrosion of magnesium alloys was also studied by in-situ observation in environmental scanning electron microscopy (ESEM). The corrosion rate changed with the wetting time during the initial corrosion process. The pre-charging of hydrogen caused crack initiated at $\beta$ phase, and with the increase of wetting time the crack propagated, implying that hydrogen produced by corrosion reaction participated in the process.

• Journal of the Korean Home Economics Association
• /
• v.37 no.12 s.142
• /
• pp.13-28
• /
• 1999

This study aimed to analyze the process of courtship form having date and marriage toward women who had job before marriage. The objects were 27.36 years old and had 9.59 months marital life at average. This study conducted structured questionnaires using the reflection of spouse selection procedure. By using collected data through questionnaires, it conducted descriptive statistics, cluster analysis and t-test. The type of marriage would be divided into the emotional marriage group and the implemental marriage group The emotional marriage group had longer dating time and more satisfaction of spouse selection than the implemental group. On value variable, the emotional marriage group had more subjective selection standard and more expectation social and emotional benefit than the latter group. On search variable, the emotional marriage group estimated the relation stability and satisfied the relation with spouse more than the implemental marriage group and expected the less possibility to meet new partner.