• 제목/요약/키워드: Life Table Method

검색결과 155건 처리시간 0.027초

생명표 활용에 대한 고찰 및 분석 방법 소개 (A review of life table applications and an introduction of its application method)

  • 신경진;최보승
    • Journal of the Korean Data and Information Science Society
    • /
    • 제24권6호
    • /
    • pp.1159-1175
    • /
    • 2013
  • 생명표란 어떤 출생집단이 나이가 많아짐에 따라 연령별로 몇세까지 살 수 있는가를 계산하여 정리한 표이다. 생명표는 주로 인구학 분야에서 연령별 사망율 예측에 주로 이용되어왔다. 그러나 본 연구에서는 생명표가 다양한 분야에서 사용되는 점을 착안하여 생명표 활용 영역을 정리하고 분류하고자 하였다. 2011년 이전에 국내외에서 발표된 대부분의 논문을 조사하여 생명표 분류에 이용하였다. 본 연구에서 분류기준은 다음과 같다. 첫째, 응용여부에 따라 일반생명표와 응용생명표로 나누었다. 둘째, 기준기간에 따라 5세를 작성단위로 하는 간이생명표와 1세를 작성단위로 하는 완전생명표로 나누었다. 셋째, 성별에 따라 남성생명표, 여성생명표, 남녀혼합생명표로 나누었다. 관찰 방법에 따라 기간생명표와 코호트 생명표로 나누었다. 마지막으로 이와 같이 분류된 생명표의 작성방법을 비교 분석해 봄으로써 더 다양한 분야에 생명표가 활용될 것을 제안하고자 하였다.

증감 노동생명표에 의한 노동기대여명의 측정과 전망 (Estimation and Projection of Work-life Expectancy by Increment/Decrement Work-Life Table Method)

  • 박경애;최기홍
    • 한국인구학
    • /
    • 제29권3호
    • /
    • pp.51-72
    • /
    • 2006
  • 우리나라의 노동생명표 대부분은 Wolfbein & Wool의 전통적 방법에 의해 작성되고 있다. 그러나 여성의 경제활동참가율이 M자 형태를 보이므로, 이러한 방법은 여성의 노동기대여명 측정에 부적합하다. 한편. 증감 노동생명표는 여성에게도 동일하게 적용될 수 있으나, 개인의 경제활동 상태 전이에 대한 자료가 필요하다. 본 연구는 Garfinkle과 Pollard et al.의 노동생명표가 Hoem, Schoen & Woodrow에 의해 개발되고, 미국 노동통계국이 채택하고 있는 증감 노동생명표와 본질적으로 동일하다는 점을 보여주고 있다. 또한 이들의 노동생명표는 전통적인 방법에 의한 생명표와 마찬가지로 일반적인 증감노동생명표처럼 개인의 경제활동 상태간 전이확률을 추정하지 않고, 공표된 거시적 경제활동참가율을 사용할 수 있는 장점이 있음을 보여주고 있다. 아울러, 통계청이 발표한 2000-2050년의 간이생명표를 바탕으로 성 연령별 경제활동참가율 전망치를 추정하고, Garfinkle-Pollard의 증감 노동생명표 방법론에 의한 노동기대여명을 전망하였다. 그 결과 2000년에서 2050년 동안 65세의 노동기대여명은 남자 5.8년에서 7.7년, 여자 4.1년에서 5.1년으로 증가되었다. 그러나, 65세 이상 고령자의 경우는 자료처리 방법 및 향후 사망확률 가정에 따라 노동기대여명이 다소 차이를 보였다. 정확한 노동기대여명의 측정 및 전망을 위해서는 고령자의 경제활동에 대한 상세한 자료가 필요함은 물론, 향후 사망력 가정에 대한 심층 연구가 수반되어야 할 것이다.

우리나라 자료에 적합한 생명표 작성방법에 대한 연구 (A Method for Construction of Life Table in Korea)

  • 박유성;김성용
    • 응용통계연구
    • /
    • 제24권5호
    • /
    • pp.769-789
    • /
    • 2011
  • 생명표는 특정 집단의 사망 경험(mortality expereience)을 반영하여 각 연령에서의 기대여명을 추정하는 통계적 모형이다. 사망 경험은 사망확률(death probability)을 통해 반영되는데, 사망확률을 추정하기 위해서는 세 가지 사항이 고려되어야 한다. 첫째는 사망률(death rate)로부터 사망확률을 추정하는 방법의 선택이며, 둘째는 사망확률의 불규칙성을 해결하기 위한 평활 방법, 셋째는 초고령 자료의 신뢰성 문제를 해결하기 위한 사망확률 추정 및 확장 문제이다. 본 논문에서는 사망확률 추정방법의 선택을 위해 Chiang 방법, 상수방법, Greville 방법, Reed and Merrell 방법 및 Keyfitz and Frauenthal 방법을 비교하며, 평활 방법으로는 Beers 방법, Greville 방법 및 이동평균 방법을 비교하도록 한다. 또한 초고령에서 사망확률 추정 및 확장을 위해 총 12가지 수학적 함수를 비교한다. 본 논문에서는 각 방법들을 비교함으로써 우리나라에 적합한 생명표 작성 방법을 제시하고, 이를 이용하여 2005년부터 2009년까지의 생명표를 작성하도록 한다. 또한 기간별 성별 기대여명의 역전현상(cross-over)현상을 해결하기 위한 방법을 제시한다.

식공간의 실용 연출과 예술 연출의 차이 분석 (Analysis of Difference between Utility Presentation and Art Presentation in Food Space)

  • 계수경;유한나
    • 동아시아식생활학회지
    • /
    • 제20권4호
    • /
    • pp.619-627
    • /
    • 2010
  • Finality in presenting table has an important significance. A presentation method in table comes to have different directionality depending on objective and significance such as the appearance of presentation for the substantial use or the appearance of presentation for delivering message. In our life, the utility table came to have value more than what supplies nutrition. Simultaneously with it, the table came to have the significance as a place of communication. What is being indicated in a different form from this is the art table. The table-coordinate starts to occupy a position in one aesthetic sphere, aside from the functional part of having a meal and communication, and is attempting the entry as the art sphere. What two types have been researched and developed so far in the face of having clear difference is limited to the utility presentation. The utility presentation and the art presentation need to be progressed at the same time rather than being separately classified and thought. Pursuit only for utility leads to being unable to proceed with making a new thing. The art table coordinate will be able to function as the new awakening point in the position of proceeding with such table coordinate. When proceeding with maintaining the form of the existing utility table, a client fails to feel fresh. Thus, coming to give new awareness by integrating art will lead to being available effectively for creating another profit. Even the art table can apply the characteristic of the display table among characteristics of the utility table. The display table aims at creating profit through communication between buyer and seller. Thus, even through the art table, both effects called the occurrence in profit and the initiative in trend will be capable of being enjoyed totally. Accordingly, the presentation of two tables in the art table and the utility table has clearly different characteristic. However, given properly using difference in presentation of the two, the best effect will be possibly seen.

로트카 생명표에서 연구 집단의 초기연령 설정에 따른 내적자연증가율 추정방법에 대한 고찰 (A Short Review for the Estimation Method of Intrinsic Rate of Natural Increase According to the Setting of Initial Age for the Study Cohort in the Lotka Life Table)

  • 김동순
    • 한국응용곤충학회지
    • /
    • 제61권4호
    • /
    • pp.549-554
    • /
    • 2022
  • 곤충생태 분야에서 생명표와 관련된 연구는 곤충연구자들에게 많은 관심을 받는 주제중 하나이다. 보통 두 가지 방법으로 생명표 통계량중 내적자연증가율을 추정하고 있는데, 첫 번째 하나는 순증가율(R0)에 자연로그를 취하고 평균세대기간(T)으로 나누어 근사치를 계산하는 방법이다(세대기간-기반 추정법). 다른 하나는 로트카-볼테라 개체군 생장 방정식에서 유도하여 최대우도법으로 정확한 내적자연증가율을 추정하는 방법이다(로트카-오일러식-기반 추정법). 후자의 경우 대상 집단의 초기 연령등급을 "0" 또는 "1"로 설정함에 따라 추정값에 차이가 발생하여 적용에 혼란이 제기되었다. 본 고찰에서는 생명표 통계량 계산과정의 역사를 간단히 정리하고, 로트카-오일러식-기반 추정법에서 최초 연령등급을 1로 설정한 경우 $\sum\limits_{x=1}^{w}e^{-rx}l_xm_x=1$의 형식, 반면 최초 연령등급을 0으로 설정한 경우 $\sum\limits_{x=0}^{w}e^{-r(x+1)}l_xm_x=1$의 형식을 적용해야 함을 재확인하였다.

석유화학 제조설비의 경제적 감가상각률 산정 (A Study on the Estimation Depreciation Rate on Petrochemical Equipments)

  • 오현승;김종수;이한교;조진형
    • 산업경영시스템학회지
    • /
    • 제32권1호
    • /
    • pp.130-136
    • /
    • 2009
  • Estimation of mortality behavior of a industrial property are useful for calculating depreciation and making management decisions relating to property. The common methods of computing depreciation require an estimation of service life, and some methods may require an estimate of life expectancy. Estimation of service life and life expectancy can be computed from a smoothed and extended life table of original life tables developed through life analysis techniques. Several actuarial techniques are available to construct a life table for depreciation application. Of these methods, the graphic approach and graduation by mathematical formula are the most widely used in the field of depreciation. A commonly used technique of smoothing and of extending the life table is to fit a lows type survivor curves to the observed retirement rate by the least square method. In this paper, estimates of depreciation rate based on directly observed data of the domestic petrochemical equipments are presented.

시멘트 분쇄기용 테이블 라이너의 굽힘 피로강도의 실험적 조사 (An Experimental Investigation of Bending Fatigue Strength in Table Liner for Cement Mill)

  • 백석흠;이경영;조석수;장득열;주원식
    • 대한기계학회논문집A
    • /
    • 제31권12호
    • /
    • pp.1214-1220
    • /
    • 2007
  • The vertical roller mill, which performs the grinding and partly blending of raw material, is the one of the important machine to produce ordinary portland cement. It has been reported that an unexpected fatigue failure occurred in a table liner in the course of grinding portland cement. The life of table liner is estimated to $4{\times}10^7$ cycles in the design stage, but at the field, when its operating time reaches to $2{\times}10^6{\sim}8{\times}10^6$ cycles, the fracture of table liner begins to be found. The fracture of table liner is initiated from the outside edge of grinding path contacting with the grinding roller. Its maintenance normally take 30 % of the total maintenance costs of the roller mill. Therefore, this study shows the clarification of the reasons occurring the fatal destruction of the table liner by fatigue fracture analysis utilizing fracture mechanics and by the finite element method. And, the results from Goodman diagram illustrate relationship of including information on the transition between tensile and bending fatigue strength in the fatigue characterization of table liner.

Sampling-based Block Erase Table in Wear Leveling Technique for Flash Memory

  • Kim, Seon Hwan;Kwak, Jong Wook
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권5호
    • /
    • pp.1-9
    • /
    • 2017
  • Recently, flash memory has been in a great demand from embedded system sectors for storage devices. However, program/erase (P/E) cycles per block are limited on flash memory. For the limited number of P/E cycles, many wear leveling techniques are studied. They prolonged the life time of flash memory using information tables. As one of the techniques, block erase table (BET) method using a bit array table was studied for embedded devices. However, it has a disadvantage in that performance of wear leveling is sharply low, when the consumption of memory is reduced. To solve this problem, we propose a novel wear leveling technique using Sampling-based Block Erase Table (SBET). SBET relates one bit of the bit array table to each block by using exclusive OR operation with round robin function. Accordingly, SBET enhances accuracy of cold block information and can prevent to decrease the performance of wear leveling. In our experiment, SBET prolongs life time of flash memory by up to 88%, compared with previous techniques which use a bit array table.

영유아 생명표 작성에 관한 연구 (Construction of a Life Table for Infant and Childhood)

  • 김종석
    • 한국인구학
    • /
    • 제3권1호
    • /
    • pp.52-61
    • /
    • 1979
  • The purpose of the study is to construct a life table for population. It is based on the fraction of last year of life, $a_X$. The data necessary for this purpose have been obtained from the 1975 Population Census Report of Korea and the Vital Statistics of Shindong-myon, Chunseong-gun, Gangwon Province which is collected for the Seoul National University public health program. Age specific death rate is adapted by the Model Life Table, West, Level 21. For the age groups of less than 5 years of age, when the record of vital events can be obtained, the fractions are calculated from the community vital statistics. And for the age groups older than 5 years of age, Greville's Method is used. The findings are summarized as follows: 1) The fraction of last year of life in infantile group is 0.3684 for males, 0.3711 for females, and in 1-4 years of age group 1.2164 for males, 1.2274 for females. Both are more than those of Japan and U.S. in 1963. 2) Infant mortality rate is 42.37 for males, 31.77 for females per 1,000 live births. 3) The mortality curves show that a higher rate is observed under 1 year of age. It drops to the lowest point at around 10 years of age and rises again as the age increases. 4) The age estimated half-survival rate is during the age group of 70-74 for both sexes. 5) Life expectancy at the age of 0 shows 65.73 years for males and 69.22 years for females.

  • PDF

모 한방병원에 내원한 뇌혈관 질환자들의 예후 (Survival Probability of the Patients with Cerebral Vascular Disease Who Visited an Oriental Hospital)

  • 김지용;서운교
    • 대한한의학회지
    • /
    • 제23권4호
    • /
    • pp.91-97
    • /
    • 2002
  • Objective: This study was conducted to know the survival probability of the patients with cerebrovascular disease. Method: 1,341 patients who were suspected of having cerebrovascular disease clinically were investigated by telephone and NHIC (National Health Insurance Corporation) data. Conclusion: 1. The study population was grouped as 'Negative Brain CT findings' (11.8%), 'Hemorrhage' (12.4%) and 'Infarction' (75.7%). 2. The survival probabilities calculated by the Life Table method were statistically significant among brain CT finding groups (P<0.01). 3. The mean survival time calculated by the Kaplan-Meier method were also statistically significant among brain CT finding groups (P<0.01). 4. The result of Cox regression model was that sex (OR=0.7), age (OR=1.07), diabetes mellitus (OR=1.38), and heart disease (OR=1.69) affected the survival of the patients with cerebrovascular disease.

  • PDF