• Journal of Hydrogen and New Energy
• /
• v.28 no.2
• /
• pp.156-165
• /
• 2017

This study quantitatively assessed the environmental impacts of fuel cell (FC) systems by performing life cycle assessment (LCA) and analyzed their energy efficiencies based on energy return on investment (EROI) and electrical energy stored on investment (ESOI). Molten carbonate fuel cell (MCFC) system and polymer electrolyte membrane fuel cell (PEMFC) system were selected as the fuel cell systems. Five different paths to produce hydrogen ($H_2$) as fuel such as natural gas steam reforming (NGSR), centralized naptha SR (NSR(C)), NSR station (NSR(S)), liquified petroleum gas SR (LPGSR), water electrolysis (WE) were each applied to the FCs. The environmental impacts and the energy efficiencies of the FCs were compared with rechargeable batteries such as $LiFePO_4$ (LFP) and Nickel-metal hydride (Ni-MH). The LCA results show that MCFC_NSR(C) and PEMFC_NSR(C) have the lowest global warming potential (GWP) with 6.23E-02 kg $CO_2$ eq./MJ electricity and 6.84E-02 kg $CO_2$ eq./MJ electricity, respectively. For the impact category of abiotic resource depletion potential (ADP), MCFC_NGSR(S) and PEMFC_NGSR(S) show the lowest impacts of 7.42E-01 g Sb eq./MJ electricity and 7.19E-01 g Sb eq./MJ electricity, respectively. And, the energy efficiencies of the FCs are higher than those of the rechargeable batteries except for the case of hydrogen produced by WE.

• Journal of the Korean housing association
• /
• v.14 no.6
• /
• pp.69-77
• /
• 2003

The environmental problems aren't only restricted in single area or country, but also related in all around the world. Various approaches have been tried to protect and utilize properly the environment. Especially, building area has been attempted to provide the model which could explain the degree of environmental influence and technology development criteria to lessen the environmental impact in building life cycle. The environmental impact in the building life cycle can be overally explained with sustainability. Sustainability can be utilized to establish the target level of building to environmental influence. This paper aimed at extracting items to evaluate the building sustainability, divided into social, economic and environmental aspects. First, 93-items is extracted from 3 areas through existing literature review. Second, the 93-items would be controlled and reviewed into 21 items, which are five social aspect items, two economic aspect items and twelve environmental items, because 93 items can not properly be applied and evaluated. And, it provided the model to combine the extracted items of each area. In social aspect, the outdoor noise is more affect than any other items. In environmental aspect, the item of surface-to-volume is more affect than any other items.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.1-12
• /
• 2014

This study carried out life cycle assessment for evaluating environmental impacts of timber Arch-Truss bridge by using domestic Pinus rigida Miller glued-laminated timber throughout life cycle such as extraction, manufacturing, transportation, construction, use, dismantlement, transportation of waste, disposal and recycling. The life cycle GHG (GreenHouse Gas) emissions of the target bridge are 192.56 ton $CO_2$ eq. in 50 years. Especially, the life cycle GHG emissions of concrete used in the target bridge are 82.84 ton $CO_2$ eq. which accounts for 53.02% of the GWP (Global Warming Potential) in extraction and manufacturing stages. The target bridge is constructed of $116.57m^3$ of domestic Pinus rigida Miller glued-laminated timber and used timber has stored 104.72 ton $CO_2$. If an effect of carbon storage in timber is applied to the total GHG emissions of the target bridge, the GHG emissions can be reduced by 54.38%. In the case of substitution effect, if domestic Pinus rigida Miller glued-laminated timber replaces steel manufactures used in other bridge which has the same structure and life span as the target bridge, the GHG emissions in extraction and manufacturing stages can be reduced by 10.26% to 23.91%.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.297-303
• /
• 2002

본 연구에서는 2002년 여름 개최되었던 세계지속가능정상회의에서 채택한 이행계획을 통해 전과정평가의 중요성을 분석하고, 이 방법을 우리나라에서 가동되고 있는 두기의 원전에 적용하여 환경영향을 분석한다. 이 분석에서는 원전의 가동단계에 해당하는 운전ㆍ유지과정을 분석하였다. 여기에는 투입물과 배출물 정보를 모두 사용하였다. 분석시 영향범주는 원전 가동에 따른 자원고갈을 비롯하여 지구온난화와 산성화를 분석하였다.

• Journal of Hydrogen and New Energy
• /
• v.28 no.6
• /
• pp.627-634
• /
• 2017

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-ZrCo membrane manufacturting process. Gabi was used as software. The Eco-Indicator 99 methodology was used to evaluate the 11 impact categories and the 10 impact categories using the CML 2001 methodology. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of the characterization and normalization, the environmental impacts of each category of impacts were GWP 100 years with the highest environmental impact of 99.9%.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.620-627
• /
• 2005

In this study, life cycle assessment (LCA) on one of corrugated cardboard box as functional unit was carried out. System boundary of this study divided according to raw material acquisition, corrugated cardboard manufacture and corrugated cardboard box manufacture stage. And environmental impacts are evaluated on each stage and sub-process. The impact categories are classified into eight categories of abiotic resource depletion, global warming stratospheric ozone depletion, photochemical oxidant creation, air acidification, eutrophication, ecotoxicity and human toxicity. From the results, it is found that environment impacts at raw material acquisition stage is the highest as about 92% of whole stage due to liner board manufacture stage. The highest environmental impacts at sub-process of corrugated cardboard and box manufacture stage is a single facer and D/W backer process that included as main process in corrugated cardboard manufacture, and is caused by used energies like electricity, B-C oil, and etc. And then diagnosis for clean production process system of package is carried out. Through diagnosis, on loss rate is reduced and inner pressure intensity of box is improved. After improvement, environmental impact was decreased about 3.8% compared with before improvement.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.58-65
• /
• 2014

This study aims to understand the environmental impact reduction of green buildings that are certified by Green standard for energy and environmental design(G-SEED). To ensure this end, this study assessed and compared the environmental impacts(global warning, ozone layer depletion, acidification, and eutrophication) of a G-SEED-certified elementary school building(green building) and an uncertified elementary school building(traditional building) using the life cycle assessment methodology. This study considered the environmental impacts from the material manufacturing, material transportation, on-site construction, and operation during 40 years. The comparison of the environmental impact intensity of two buildings showed that the green building generated much more environmental impacts than the traditional building. For example, the global warming potential of the green building was approximately 12.5% higher than of the traditional building since the global warming potential of the green building was 3.751 $t-CO_2eq./m^2$ while that of the traditional building was 3.282 $t-CO_2eq./m^2$. It signifies that the G-SEED doesn't guarantee the reduction of the environmental impacts in terms of four impact categories. Therefore, the G-SEED should be complemented and improved to achieve the environmental impact reduction.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.406-412
• /
• 2008

Biogas plant with anaerobic digestion is receiving high attention as a facility for both livestock waste treatment and electric power generation. Objective of this study was to perform life cycle assessment (LCA) of a biogas plant which incorporates swine and food waste (7:3) as source materials for biogas production. In addition, the biogas production process was compared with the prevalent composting method as a reference in the aspects of green house gas (GHG) reduction potential and environmental impact. The biogas method was capable of reducing 52 kg $CO_2$ eq. emission per ton of swine/food waste, but the composting process was estimated to emit 268 kg $CO_2$ eq. into air. The biogas method was evaluated as more beneficial to the environment by mitigating the impact on abiotic depletion potential (ADP), global warming potential (GWP), ozone depletion potential (ODP), eutrophication potential (EP), and photochemical ozone creation potential (POCP), but not to acidification potential (AP).

• Clean Technology
• /
• v.21 no.2
• /
• pp.85-89
• /
• 2015

Utilized in a variety of electronic components, electronic components industry with metallic ink technology was established itself as a major technology research and development was gradually increasing, silver ink that is excellent in conductivity and stability, have long been used in the industry of electronic components in recent years and silver ink has been the size of nanoscale particles dispersed by developing display, an electronic tag, a flexible circuit board or the like used in the semiconductor and electronics as has been highlighted in, however industry modernization of equipment by increasing the production and consumption of products generated during the production process and environmental pollutants by use of waste products is expected to bring a serious environmental problem. In this study, prepared by a wet reduction method, the manufacturing process of the silver nano-ink to the entire process of the environmental impact assessment (LCA) was evaluated using the techniques. Life cycle assessment software GaBi 6 was used as received from the relevant agencies of the silver nano-ink data with reference to the manufacturing process, building inventory was international organization for standardization (ISO) 14040, 14044 compliant LCA conducted over four stages.

• Fashion & Textile Research Journal
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2023

An eco-CMF design process is vital to the sustainable development of fashion products concerning both emotional and physical quality factors, thus extending the use phase of the product life cycle. Life cycle assessment (LCA) is widely used in other fields to evaluate environmental impact; However, the method is rarely adopted in fashion. While cooperating with design, technology, and the users, reflecting the CMF design process is an excellent approach to the sustainable development of fashion products. Moreover, it is likely to evoke favorable reactions in users toward products. Therefore, this study aimed to review the sustainable design strategies associated with CMF in the fashion industry. Using a systematic review, 135 papers that met the inclusion criteria were examined from peer-reviewed journal articles published between 1990 and 2022. They contained specific design processes or tools relevant to eco-CMF design. The search used the Web of Science database. After a rigorous search, the final six peer-reviewed journal articles were selected and underwent thorough content reviews. Then, the CMF design tools and frameworks for eco-design featured in the articles were carefully reviewed and analyzed. Finally, we proposed practical guidelines for the sustainable development of eco-CMF design in the fashion industry. The study outcomes revealed the need for concrete eco-CMF design processes, particularly for fashion products. Furthermore, more active research involving eco-CMF design processes for the sustainable environmental impact of fashion products is required.