• 제목/요약/키워드: Library noise

검색결과 75건 처리시간 0.024초

OpenCV를 사용한 화재 영상 처리 (Fire Image Processing Using OpenCV)

  • 강석원;이순이;박지웅
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
    • /
    • pp.79-82
    • /
    • 2009
  • 본 논문에서는 화재 영상을 검출하기 위한 새로운 영상처리 기법을 제안한다. 카메라에서 획득한 영상에서 화재 영상 검출에 필요한 차영상, 이진화 영상, 윤곽선 검출, 노이즈 제거(열림, 닫힘 연산), 픽셀검사[1], 플리커링 검사[2]등 영상처리기법들을 구현하기 위하여 OpenCV라는 영상처리 라이브러리를 사용하였다.

  • PDF

OpenCV를 사용한 스테레오 비전 시스템의 프로토타입 구현 (A Prototype for Stereo Vision Systems using OpenCV)

  • 이정수;정새암;김준성
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.763-764
    • /
    • 2008
  • Sensing is an important part of a smart home system. Vision sensors are a type of passive systems, which are not sensitive to noise. In this paper, we implement a prototype for stereo vision systems using OpenCV. It is an open source library for computer vision developed by Intel corporation. The prototype will by used for comparing performance among various stereo algorithms and for developing a stereo vision smart camera.

  • PDF

새로운 CBFP 스케일링 방법을 적용한 8192점 FFT프로세서 설계 (A Design of 8192-point FFT Processor using a new CBFP Scaling Method)

  • 이승기;양대성;박광호;신경욱
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
    • /
    • pp.113-116
    • /
    • 2002
  • This paper describes a design of 8192-Point pipelined FFT/IFFT processor (PFFTSk) core for DVB-T and DMT-based VBSL modems. A novel two-step convergent block floating -point (75_CBFP) scaling method is proposed to improve the signal- to-quantization-noise ratio (SeNR) of FFT/IFFT results. Our approach reduces about 80% of memory when compared with conventional CBFP methods. The PFFTSk core, which is designed in VHDL and synthesized using 0.25-${\mu}{\textrm}{m}$ CMOS library, has about 76,300 gates, 390k bits RAM, and Twiddle factor ROM of 39k bits. Simulation results show that it can safely operate up to 50-MHz clock frequency at 2.5-V supply, resulting that a 8192-point FFT/IFFT can be computed every 164-$mutextrm{s}$. The SQNR of about 60-dB is achieved.

  • PDF

Design of Broad Band Amplifier Using Feedback Technique

  • Kang, Tae-Shin;Rhee, Jin-Koo
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제3권1호
    • /
    • pp.42-46
    • /
    • 2003
  • In this paper, an MMIC broadband amplifier for wireless communication systems has been developed by using an active feedback method. This active feedback operates at much higher frequencies than a method by a spiral inductor feedback and its size is independent of the inductance value. The MMIC broadband amplifier was designed using a $0.5{\;}{\mutextrm{m}}$ MESFET library. The fabricated chip area was $1.4{\;}mm{\;}{\times}{\;}1.4{\;}mm. Measurement showed a gain of 18 dB with a gain flatness of ${\pm}3$ dB in a 1.5 GHz~3.5 GHz band. The maximum output power and the minimum noise figure were 14 dBm and 2.5 dB in the same band, respectively.

Active Feeback를 이용한 MMIC 광대역 증폭기 설계 (Broadband Amplifier Using Active Feedback Technique)

  • 강태신;안단;윤용순;이진구
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
    • /
    • pp.197-201
    • /
    • 2000
  • In this paper, a MMIC(Monolithic Microwave Integrated Circuit) broadband drive amplifier for wireless communication system has designed using active feedback method. The MMIC brodband amplifier was designed using 0.5$\mu\textrm{m}$ MESFET of ETRI library. Simulation results show that gain is 22 dB, and gain flatness ${\pm}$1 dB. Maximum output power 15 dBm and noise figure 2.5 dB in bandwidth 500 MHz ~3.0 GHz. The MMIC Broadband amplifer's chip area is 14mm${\times}$1.4mm.

  • PDF

Template matching을 위한 새로운 알고리즘 및 ASIC 칩 구현 (A new template matching algorithm and its ASIC chip implementation)

  • 서승완;선우명훈
    • 전자공학회논문지C
    • /
    • 제35C권1호
    • /
    • pp.15-24
    • /
    • 1998
  • This paper proposes a new template matching algorithm and its chip design. The CC and SAD algorithms require the massive amount of computation. Hence, several algorithms using quantization schemes have been proposed to reduce the amount of computation and its hardware cost. the proposed algorithm called the EMPPM improves at least 22% of the noise margin compared with the MPPM algorithm. In addition, the proposed architecture can reduce the gate count by more than 60% of that used in the SAD algorithm without usig quantization schemes and 28% of the MPPM algorithm. The VHDL models have been simulated by using the CADANCETEX>$^{TM}$ and logic synthesis has been performed by using the SYNOPSYSTEX>$^{TM}$ with $0.6\mu\textrm{m}$ SOG(sea-of-gate) cell library. The implemented chip consists of 35,829 gates, operates at 100 MHz (worst case 53 MHz) and performs the template maching with the speed of 200 Mpixels/sec.

  • PDF

RS422 버스를 이용한 저속통제기 UFC/DC 데이터 통신 기법 개발 (Development of UFC/DC Data Communication method for XKO-1 using RS-422 Bus)

  • 양승열;김영택
    • 한국군사과학기술학회지
    • /
    • 제5권2호
    • /
    • pp.123-131
    • /
    • 2002
  • ASC(Avionics System Computer) was developed to control weapon delivery and navigation sensors, and to perform man-machine interface with pilots for XKO-1 aircraft. The data communications between ASC and UFC(Up Front Controller), DC(Data Concentrator) were implemented by RS422 serial data bus. Also, SCIL(Standard Computer Interface Library) was designed to facilitate control and management of the computer hardware resources and is embedded in the ASC. These structures have a merit of noise immunity and a reduction of wire harness for signal lines, and enable OFP(Operational Flight Program) programmers to use the SCIL easily without knowing hardware details. Manufactured system was on installed on XKO-1, and peformed for BIT(Built In Test) and interface test with UFC and DC. The test results show that it meets the system requirements.

2차원 신호의 최대 정보량을 갖는 전력 스펙트럼 추정 (Maximum Entropy Power Spectral Estimation of Two-Dimensional Signal)

  • Sho, Sang-Ho;Kim, Chong-Kyo;Lee, Moon-Ho
    • 대한전기학회논문지
    • /
    • 제34권3호
    • /
    • pp.107-114
    • /
    • 1985
  • This paper presents the iterative algorithm for obtaining the ME PSE(Maximum Entropy Power Spectral Estimation) of 2-dimensional signals. This problem involves a correction matching power spectral estimate that can be represented as the reciprocal of the spectral of 2-dimensional signals. This requires two matrix inversion every iterations. Thus, we compensate the matrix to be constantly positive definite with relaxational parameters. Using Row/Column decomposition Discrete Fourier Transform, we can decrease a calculation quantity. Using Lincoln data and white noise, this paper examines ME PSE algorithms. Finally, the results output at the graphic display device. The 2-dimensional data have the 3-dimensional axis components, and, this paper develops 3-dimensional graphic output algorithms using 2-dimensional DGL(Device Independent Graphic Library) which is prepared for HP-1000 F-series computer.

  • PDF

가중치가 부여된 연관 규칙을 이용한 문서 분류 (Document Classification using Weighted Associative Classifier)

  • 김흥남;이기성;조근식
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (1)
    • /
    • pp.154-156
    • /
    • 2003
  • 인터넷의 급속한 성장과 더불어 많은 정보와 데이터들을 인터넷을 통하여 얻을 수 있게 되었으며 많은 단체들이 문서들을 웹을 통하여 이용 가능하게 만들고 있다. 이에 따라 다양한 정보와 데이터를 효과적으로 분류하고 검색하는 문서 분류 (Document Classification)에 대한 알고리즘이 다양한 분야에서 널리 연구되어 왔으며 본 논문에서 초점을 두고 있는 전자 도서관 (Digital Library) 분야에서도 활발히 연구되어지고 있다. 하지만 기존의 전자 도서관의 문서 분류 알고리즘들은 문서들의 각 단락의 비중을 고려하지 않은 채 단어들의 발생 빈도에 초점을 두어 많은 잡음 단어 (Noise Term)를 포함하고 그로 인하여 분류 성능이 떨어졌다. 본 논문에서는 문서 단락의 중요도에 따라 다른 .가중치를 부여하여 단어 지지도 (Term Support)가 높은 단어들을 추출하고 그 단어들로 연관 규칙 (Association Rules)을 이용하여 분류 규칙을 생성하는 방법을 제안한다. 제안된 방법의 성능평가를 위해 문서 분류에 널리 쓰이는 나이브 베이지안 분류자 (Na$\square$ve Bayesian Classifier) 및 기존의 단순 연관 규칙 분류자 (Associative Classifier)와 비교 평가하였다. 그 결과, 각 가중치가 부여된 연관 규칙 분류 방법이 나이브 베이지안 분류 방법과 단순 연관 규칙 분류 방법보다 높은 성능을 보였다.

  • PDF

피드백 저항 제어에 의한 무선랜용 가변이득 저전압구동 저잡음 증폭기 MMIC (A Variable-Gain Low-Voltage LNA MMIC Based on Control of Feedback Resistance for Wireless LAN Applications)

  • 김근환;윤경식;황인갑
    • 한국통신학회논문지
    • /
    • 제29권10A호
    • /
    • pp.1223-1229
    • /
    • 2004
  • 본 논문에서 ETRI 0.5$\mu\textrm{m}$ MESFET 라이브러리 공정을 이용하여 동작 주파수 5GHz대 저전압구동 가변이득 저잡음 증폭기 MMIC를 설계 및 제작하였다. 이 저잡음 증폭기는 HIPERLAN/2의 Adaptive Antenna Arrays와 함께 사용할 수 있도록 이득조절이 가능하도록 설계하였다. 가변이득 저잡음 증폭기는 2단 캐스케이드 구조이며, 게이트전압에 따라 채널저항이 제어되는 증가형 MESFET과 저항으로 구성된 부귀환 회로를 제안하였다. 제작된 가변이득 저잡음 증폭기의 측정값은 $V_{DD}$ =1.5V, $V_{GG1}$=0.4V, $V_{GG2}$=0.5V일때 5.5GHz의 중심 주파수, 14.7dB의 소신호 이득, 10.6dB의 입력 반사손실, 10.7dB의 출력 반사손실, 14.4dB의 가변이득, 그리고 잡음지수 2.98dB이다. 또한, 가변이득 저잡음 증폭기는 -19.7dBm의 입력 PldB, -10dBm의 IIP3, 52.6dB의 SFBR, 그리고 9.5mW의 전력을 소비한다.다.다.