• 제목/요약/키워드: LiSi

검색결과 908건 처리시간 0.026초

졸-겔 방법에 의한 $Li_2O-Al_2O_3-SiO_2$계 저열팽상성 결정화유리의 제조 (Preparation of Ultra-Low Thermal Expansion L$i_2$O-A$l_2$$O_3$-Si$O_2$ Glass-Ceramics by Sol-gel Technique)

  • 양중식;김종범;양중식
    • 한국재료학회지
    • /
    • 제3권3호
    • /
    • pp.207-214
    • /
    • 1993
  • $Li_2O-Al_2O_3-SiO_3$계 결정화유리의 저온합성을 위하여 출방원료로서 각 해당 금속 알콕시드를 사용하였다. 알코올을 용매로 충분히 첨가하고, drying control chemical additive로 dimethy1 formamide를 적당량 첨가한 혼합용용액을 과잉의 물로 충분히 가수분해시킨 습윤겔을 저온으로 건고하여 균열이 없는 건조된 monolith겔을 합성하였다. 건조겔로부터 750-$950^{\circ}C$로 10시간 이상 소결하여 저열팽창성을 나타내는 ${\beta}$-eucrypytite(${\beta}$-quartz 고용체), $Li_2O\cdot Al_2O_3\cdot 3SiO_2$${\beta}$-spodumene등의결정상을 석출시켰다.

  • PDF

$Li_2O$-$Al_2O_3$-$SiO_2$계 소지의 내열 강화특성(I) (The Thermally Resistance Strength of LAS($Li_2O$-$Al_2O_3$-$SiO_2$)System(I))

  • 이응상;최성철;박현;조우석
    • 한국세라믹학회지
    • /
    • 제27권2호
    • /
    • pp.283-287
    • /
    • 1990
  • The study was aimed at investigating sintering characteristics, the overall properties from the ternary Li2O-Al2O3-SiO2 system. This system, which was considered without additives and selected five compositions, was studied with variation of the amount of SiO2. The reactivity of the system was observed by D.T.A.. Characteristics of sintering, microstructure, property and stability of produced phase were studied. It was found that because the range of sintering was narrow and the temperature of sintering was close to the melting temperature, the sintering by the general method was difficult. Also, these linear thermal expansion coeffecients were measured.

  • PDF

졸-겔 방법을 이용한 LiMn2O4 박막 이차 전지 제작 및 전기화학적 특성 조사 (Fabrication of LiMn2O4 Thin-Film Rechargeable Batteries by Sol-Gel Method and Their Electrochemical Properties)

  • 이중한;김광주
    • 한국진공학회지
    • /
    • 제20권3호
    • /
    • pp.205-210
    • /
    • 2011
  • 졸-겔(sol-gel) 방법을 이용하여 스피넬(spinel) 구조의 산화물 $LiMn_2O_4$ 박막을 Pt/Ti/$SiO_2$/Si 기판 위에 제작하여 그 구조적 성질 및 이차 전지 전기화학적 특성을 조사하였다. 박막에서의 Li/Mn 몰비(molar ratio)가 0.5 미만일 경우 박막에 $LiMn_2O_4$ 상뿐만 아니라 $Mn_2O_3$ 상이 존재함이 관측되었다. $LiMn_2O_4$ 박막을 이용한 반전극(half cell) 전지를 제작하여 충전-방전 순환과정을 반복수행 하였고, 과정 시작 전후에 X-ray diffraction 및 Raman spectroscopy 측정을 통하여 과정 중 발생하는 박막의 구조적 성질 변화를 조사하였다. 순수한 $LiMn_2O_4$ 박막 전지의 경우 충전-방전 횟수가 증가함에 따라 방전 용량은 서서히 감소하여 300회에 이르러서는 초기 용량의 72%로 줄어들었다. 이와 같은 결과는 충전-방전 과정 중 스피넬 구조의 사면체 자리로부터 탈리되었다가 다시 삽입되는 $Li^+$ 이온 수의 감소 및 이에 따르는 $Mn^{4+}$ 이온 수 증가와 관련이 있는 것으로 해석된다. 또한, 순환 횟수가 증가함에 따라 박막 내에 $Mn_2O_3$ 상의 밀도가 점차 증가함이 관측되었다.

3차원 구조의 $LiMn_2O_4$ 박막전극의 제조 및 전기화학적 특성 (Fabricatoin and electrochemical property of 3-dimesional $LiMn_2O_4$ thin film)

  • 박보건;유제혁;박용준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.64-65
    • /
    • 2008
  • 3D microbattery에 사용할 수 있는 $LiMn_2O_4$ 3차원 박막전극을 제조하여 그 전기화학적 특성을 관찰하였다. 3차원 구조의 형성을 위하여 먼저 polystyrene(PS) microsphere를 platinum이 증착된 Si/$SiO_2$ 기판위에 dip-coating 방식으로 코팅시켜 template로 사용하였다. 그 위에 sol-gel법을 이용, 박막을 형성시킨 후 template 를 제거하는 방식으로 $LiMn_2O_4$ 3차원 박막전극을 형성하였는데 이때 solution은 Lithium acetylacetonate[$LiCH_3CO-CHCOCH_3$], Manganese(III) acetylacetonate [Mn$(CH_3COCHCOCH_3)_3$]를 source 물질로 1-butanol과 acetic acid를 solvent로 활용하여 제조하였다.

  • PDF

Y-cut LiNbO$_3$ 양자확산 광도파로를 이용한 전기광학 차단형 광변조기 (Electro-Optic Cutoff Modulator on Y-cut LiNbO$_3$ Proton-Diffused Channel Waveguides)

  • 손영성
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.269-273
    • /
    • 1990
  • The proton conserving effect of diffusion with self-aligned SiO2-cladding is investigated by infrared transmission spectra. Based on the proton conserving effect, proton-diffused channel waveguides with self-aligned SiO2-cladding substrates. And an electro-optic cutoff modulator with self aligned electrode that utilizes a single-mode proton-diffused channel waveguide in a Y-cut XX-propagating LiNbO3 substrate is fabricated. Over 20 dB extinction has been achieved with applied voltage of 15V.

  • PDF

Generation of LiF(Mg,Cu,Na,Si) thermoluminescent crystal and evaluation of dose response and sensitivity

  • Abdollah Khorshidi
    • Nuclear Engineering and Technology
    • /
    • 제56권7호
    • /
    • pp.2790-2798
    • /
    • 2024
  • In this research, thermoluminescent pellets were prepared by adding Mg, Cu, Na and Si impurities to lithium fluoride (LiF) crystal powder via melting and quenching methods to study dosimetric characteristics. Here, its reproducibility, dose response, dosimeter sensitivity, thermal and optical fading were investigated and the obtained results were compared with the properties of LiF: Cu, Mg, P crystal nominated as GR-200.

$Li/Ge(111)-3\times1$ 표면의 Core-level 스펙트럼에 대한 분석 연구 (Analysis of Core-level Spectra of the $Li/Ge(111)-3\times1$ Surface)

  • 조혜진;김영훈;이근섭
    • 한국진공학회지
    • /
    • 제15권1호
    • /
    • pp.31-36
    • /
    • 2006
  • [ $Li/Ge(111)-3{\times}1$ ] 표면의 구조를 고찰하기 위해, Ge 3d core-level 광전자 스펙트럼을 분석하였다. Curve fitting을 통하여 스펙트럼에서 bulk Ge 3d peak에 해당하는 peak의 양쪽에 각각 하나씩의 표면 성분이 있음을 확인하였다. $Li/Ge(111)-3\times1$ 표면의 core-level spectrum에서의 두 표면 peak의 존재와 그 위치는 같은 금속에 의해 유도된 $Si/Ge(111)-3\times1$의 경우와 유사하며, 이는 두 표면의 구조fl서의 유사성을 시사한다. $Li/Ge(111)-3\times1$ 표면의 core-level 광전자 스펙트럼에서 보이는 두 개의 표면 성분의 존재와 위치는 알칼리 금속으로부터 유도되는 $Si/Ge(111)-3\times1$의 구조 모형으로 제안된 honeycomb-chain 모형과 잘 일치한다.