• 제목/요약/키워드: LiClO₄

검색결과 328건 처리시간 0.02초

Sol-Gel 법에 의한 LiMn$_2$O$_4$의 합성 및 리튬이차전지용 전극물질로의 특성 (The Synthesis of LiMn$_2$O$_4$by sol-gel method and properties as electrode materials for lithium secondary battery)

  • 이진식;박용성;우제완
    • 한국결정성장학회지
    • /
    • 제10권3호
    • /
    • pp.219-225
    • /
    • 2000
  • 스피넬형의 $LiMn_2$O$_4$는 출발물질로 LiOH와 Mn($CH_3$COO)$_2$.$4H_2$O를 사용하여 졸-겔법으로 합성한 xerogel을 $150^{\circ}C$로 1차 열처리한 후 $350^{\circ}C$로 2차 열처리하여 합성하였다. 그러나 $350^{\circ}C$ 이상으로 열처리할 경우 $Mn_2O_3$가 생겼으며, 이로 인해서 Li/lM $LiClO_4$(in PC)$LiMn_2O_4$cell을 구성하여 0.25 mA/$\textrm{cm}^2$의 전류밀도로 충.방전 실험을 한 결과 $350^{\circ}C$에서 열처리한 것은 15 cycle후에 88 mAh/g에서 56 mAh/g으로 35.7%의 용량감소가 나타났으나 $500^{\circ}C$에서 열처리한 것은 89 mAh/g에 51 mAh/g으로 42.5%의 용량감소가 나타났으며 이는 $Mn^{3+}$ 의 증가로 인한 Jahn-Teller distortion의 결과로 볼 수 있다.

  • PDF

리튬금속 SEI의 전해질 농도의존성 (Dependence of Electrolyte Concentration on SEI of Lithium Metal)

  • 최혜강;정순기;김양수
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2011년도 춘계학술논문집 1부
    • /
    • pp.158-160
    • /
    • 2011
  • 본 연구에서는 리튬 금속을 음극소재로 사용하기 위해 수지상 리튬의 성장을 억제하기 위한 지침을 얻기 위한 목적으로 TEM(Transmission Electron Microscope)과 임피던스를 주된 분석 수단으로 이용하여 2. 15 M LiBETI/ PC, 2.04 M $LiClO_4$/ PC 전해질은 1 M LiBETI/ PC, 1 M $LiClO_4$/ PC 전해질보다 얇고 치밀한 SEI(Solid Electrolyte Interphase) 구조를 가지고, 클로로포름에 의해 SEI의 유기물이 녹아 두께가 얇아 졌다. 임피던스를 측정한 결과 두꺼운 두께를 가진 SEI는 저항이 더 크고, 클로로포름 처리 후에는 저항이 커진 것을 확인할 수 있었다.

  • PDF

In-line Monitoring of an Oxide Ion in LiCI Molten Salt Using a YSZ Based Oxide Ion Selective Electrode

  • Cho, Young-Hwan;Jeon, Jong-Seon;Yeon, Jei-Won;Choi, In-Kyu;Kim, Won-Ho
    • Nuclear Engineering and Technology
    • /
    • 제36권5호
    • /
    • pp.415-419
    • /
    • 2004
  • The electrode potential characteristics of a YSZ based membrane metal oxide electrode have been studied in molten LiCL at $700^{\circ}C$ by the potentiometric method. The electrode exhibited a good potential response to log[$O^2$] and data reproducibility. The calibration plot (potential vs. log[$O^2$] was found to be linear, obeying the Nernst equation. The electrode potential showed a good reversibility corresponding to increase/decrease of the oxide ion present in the molten LiCl. The physical and chemical durability appeared to be sound after several repeated uses, resulting in reproducible results. However, "the proposed electrode" failed when metallic Li was present in the melt.

리튬-철 산화물 전극의 제조 및 전류전위 순환 특성에 관한 연구 (A Study on the Fabrication of Lithium Iron Oxide Electrode and its Cyclic Voltammetric Characteristics)

  • 정원중;주재백;손태원
    • 전기화학회지
    • /
    • 제2권3호
    • /
    • pp.156-162
    • /
    • 1999
  • 본 연구에서는 리튬전지 내 양극 재료로서 리튬-철계 산화물의 응용가능성을 모색하기 위하여 여러 제조방법에 따라 변화되는 전기화학적 특성을 고찰하고자 하였다. 철산화물에 대한 기본적인 양극 전기화학적 특성을 관찰하기 위해 철판, 철분말을 산화시켜 제작한 전극과 FeOOH 분말로 제작한 전극을 전류전위 순환실험을 실행하였다. 그 결과 철판과 FeOOH분말 전극의 경우 거의 리튬 층간의 산화-환원 반응이 일어나지 않음을 알 수 있었으며 철 분말의 산화물 전극에서는 리튬이온의 환원반응 피크는 보이나 산화반응은 거의 관찰되지 않았다. 또한 출발 물질 $FeCl_3-6H_2O,\;NaOH.\;LiOH$를 혼합하여 저온으로 가열하여 층상의 $LiFeO_2$를 합성하였으며, 출발 물질의 조성비를 바꾸어 그 영향을 조사하였다. 그 결과 NaOH의 첨가량이 증가할수록 전극의 용량과 효율은 감소하나 용량의 감소율은 작아짐을 알 수 있었다. $NaOH/FeCl_3/LiOH$의 몰 비를 2/1/7로 조성하여 합성하였을 때 가장 큰 용량을 보였으나 효율은 30회 순환 후 급격히 감소하였다.

Chemical Design of Highly Water-Soluble Ti, Nb and Ta Precursors for Multi-Component Oxides

  • Masato Kakihana;Judith Szanics;Masaru Tada
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권8호
    • /
    • pp.893-896
    • /
    • 1999
  • Novel citric acid based Ti, Nb and Ta precursors that are highly stable in the presence of water were developed. No alkoxides of Ti, Nb and Ta were utilized in the preparation, instead much less moisture-sensitive metallic Ti, NbCl5 and TaCl5 were chosen as starting chemicals for Ti, Nb and Ta, respectively. The feasibility of these chemicals as precursors is demonstrated in the powder synthesis of BaTi4O9, Y3NbO7 and LiTaO3. The water-resistant Ti precursor was employed as a new source of water-soluble Ti in the amorphous citrate method, and phase pure BaTi4O9 in powdered form was successfully synthesized at 800 ?. The Pechini-type polymerizable complex method using the water-resistant Nb and Ta precursors was applied to the synthesis of Y3NbO7 and LiTaO3, and both the powder materials in their pure form were successfully synthesized at reduced tempera-tures, viz. 500-700 ?. The remarkable retardation of hydrolysis of these water-resistant precursors is explained in terms of the partial charge model theory.

이온전도성 Poly(ethylene oxide) 고분자 전해질과 Li과의 계면에 미치는 가소제 및 Zeolite의 첨가효과 (The Effect of Plasticizer and Zeolite Addition on the Interface between Polymer Electrolyte Based on Poly(ethylene oxide) and Li Electrode.)

  • 김종욱;구할본;진봉수;문성인;윤문수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 추계학술대회 논문집 학회본부
    • /
    • pp.205-208
    • /
    • 1994
  • The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li secondary battery. PEO-$LiClO_4$ electrolyte with plasticizer is very unstable. Passivation phenomena in polymer electrolyte cell was described by the SPL model. The time dependance of the impedance indicates that a passivation layer grows rapidly on the Li surface. However, the growing of passivation layer on the Li surface can be restrained by addition of zeolite to the PEO electrolyte. It suggested that addition of zeoliteto to the PEO-$LiClO_4$ electrolyte effectively controls the formation of a passivation layer on Li electrode.

  • PDF

$SiO_2$가 유리섬유로 보강된 고분자 겔 전해질의 전기 화학적 특성에 미치는 영향 ([ $SiO_2$ ] Effect on the Electrochemical Properties of Polymeric Gel Electrolytes Reinforced with Glass Fiber Cloth)

  • 박호철;김상헌;전종한;김동원;고장면
    • 전기화학회지
    • /
    • 제4권1호
    • /
    • pp.6-9
    • /
    • 2001
  • 유리섬유(glass fiber cloth, GFC)가 보강제로 사용된 고분자 겔 전해질(polymeric gel electrolytes, PGEs)에 $SiO_2$를 첨가하여 전해질의 전기 화학적 특성을 조사하였다. 가소제로는 Ethylene carbonate(EC) , propylene carbonate(PC), diethyl carbonate(DEC)를, 리튬염으로는 $LiClO_4$를 고분자로는 polyacrylronitrile(PAN)과 poly(vinylidene fluoride-co-hexafluoro propylene)(P(VdF-co-HFP))을 사용하여 $80\~90{\mu}m$의 두께로 전해질을 제조하였다. 제조된 전해질은 모두 상온체서 $10^{-3}S/cm$의 이온 전도도를 나타내었고, 4.8V까지 안정하였다. 리튬금속을 사용하여 제조된 셀의 임피던스 결과에서는 시간이 지남에 따라 모든 전해질이 부동태 피막의 성장으로 계면저항이 증가했으나, $SiO_2$첨가비율에 따라 뚜렷한 차이는 보이지 않았다. $LiClO_2$와 mesophase pitch-based carbon fiber(MCF)를 각각 양극과 음극으로 사용하여 제조된 겔의 임피던스에서는 $SiO_2$가 첨가되지 않은 셀의 옴 저항이 충전, 방전이 진행되는 동안 많은 변화를 보였으며, $SiO_2$가 첨가된 셀의 저항은 거의 변화되지 않았고, 계면의 변화도 적었다. 또한 방전용량에서도 $SiO_2$$20\%$가 첨가된 전해질이 0.2C의 방전속도에132mAh/g의 비 용량을 나타내었고, 2C의 방전속도에서$85\%$의 방전용량을 유지하였다.