• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권6호
• /
• pp.1994-2017
• /
• 2022

In view of the past, the mobility of the multicast source in the mobility networks is seldom discussed in the traditional multicast protocols. It is a heavy cost for the traditional multicast protocols to reconstruct the multicast tree in the Network Mobility (NEMO) environment. This article proposes an alternative multicast protocol, referred to as Mobility-Sensitive Multicast protocol (MSM), for the NEMO environment. The MSM can be considered as an alternative version of the Multicast Listener Discovery (MLD) protocol to maintain the multicast tree in the NEMO. There are two obvious contributions for the MSM. Reconstruct mechanism could rebuild the multicast tree for the mobility of the multicast source. Multi-group suppression mechanism reduce the multicast tree maintaining cost for the mobility of the multicast members. Through the performance evaluations and analyses, the MSM has less cost to maintain the multicast tree than the traditional multicast protocols, especially for a large numbers of multicast groups. Moreover, the MSM allows the mobility of the multicast source to reconstruct the multicast tree easily.

• 대한한의학원전학회지
• /
• 제29권4호
• /
• pp.17-36
• /
• 2016

Objectives : This paper seeks to study the provenances of 10 Symptoms of Para-cold damage from Yixuerumen, and discovers the rationality and originality of para-cold damages recognized by Li Chan. Methods : The paper looks through the books referenced by Yixuerumen to investigate the source text for Yixuerumen's Para-cold Damage chapter, and the contents of the referenced books will be compared to that of Yixuerumen. Results : The sources of the 10 symptoms of para-cold damage from Yixuerumen Chapter of Cold Damage can be traced to Leizhenghuorenshu (expectoration, indigestion, rising temperature due to lack of energy, and beriberi), Wang Zhen's Shanghanzhengzhimingtiao Xinzengxuleishanghansizheng(the infection in a boil, blood sattis, caused overexertion, and pox), and Liu Chun's Yujiweiyi's chapter on Common Cold. Here, Li Chan made his own addition of internal damage and damage of overworking. Li Chan seems to have considered para-cold damage not as a type of cold damage but as a "concept relative to the broader range of cold damage." In reflection of this understanding, Li Chan limited the number of categories to ten in accordance with the developmental trace leading from Leizhenghuorenshu to Shanghanzhengzhimingtiao. When we understand para-cold damage as a "concept relative to the narrower range of cold damage," it could be used as a mean as for "Wenbin diagnosis," but Yixuerumen's para-cold damage is only utilized for the "diagnosis of a broader concept of cold damage." Conclusions : Li Chan deserves credits for his academic rationality and originality displayed by the method he used to form para-cold damages where he used real cold damage and para-cold damage as principles, by the division of para-cold damage symptoms into ten provenances, by the creation of the concept of para-cold damage, and by his broad collection of prescription and treatment corresponding to each type.

• 전기화학회지
• /
• 제16권3호
• /
• pp.157-161
• /
• 2013

다공성 $LiMn_{0.6}Fe_{0.4}PO_4$ (LMFP)를 졸-겔법을 이용하여 합성하였고, 원료물질을 양론비로 혼합한 후 혼합물을 $600^{\circ}C$에서 10시간 동안 가열하여 입자 표면 전체에 전도성 탄소물질이 균일하게 형성된 LMFP을 제조하였다. LMFP의 결정구조는 리트펠트법에 의해 조사하였고, 표면구조와 기공특성은 주사전자현미경, 투과전자현미경, BET로 분석하였다. 제조된 LMFP는 표면적이 크고, 입자 표면에는 웹(web) 형태의 다공성 탄소층이 균일하게 형성되어 있는 것을 확인하였다. 상온에서 LMFP를 양극으로 사용하여 0.1 C의 전류밀도에서 초기방전용량은 152 mAh/g, 에너지밀도는 570 Wh/kg로 높았고 사이클 성능도 장기적으로 안정적이었다. 졸-겔법에 의해 제조된 LMFP는 높은 기공도와 균일한 탄소코팅에 의한 시너지효과로 이온확산이 용이하여 우수한 전기화학적 특성을 나타내었다.

• Journal of Platform Technology
• /
• 제8권4호
• /
• pp.11-19
• /
• 2020

자율주행 환경은 실시간으로 상황이 급변하기 때문에 동적 객체인식 알고리즘이 반드시 필요하다. 또한, 자율주행자동차에 내장된 센서와 제어모듈이 증가하면서 중앙제어장치의 부하가 급격히 증가하고 있다. 중앙제어장치의 부하를 줄이기 위해서 단일 센서에서 출력되는 데이터의 최적화가 필요하다. 본 연구는 라이다에 탑재된 임베디드 프로세서를 기반으로 한 동적 객체인식 알고리즘을 제안한다. 라이다에서 출력되는 포인트클라우드 기반 객체인식을 위한 오픈소스들이 존재하지만, 대부분 고성능 프로세서를 요구한다. 라이다에 탑재된 임베디드 프로세서는 리소스 제약 때문에 기능 구현을 위한 최적화 된 아케텍처가 반드시 필요하다. 본 연구에서는 자율주행자동차를 위한 라이다 임베디드 프로세서 기반 동적 객체인식 아키텍처를 설계하고, 포인트클라우드 크기와 객체인식 처리 지연시간의 상관관계를 분석하였다. 제안하는 객체인식 아키텍처는 포인트클라우드 크기가 증가함에 따라 객체인식 처리 지연시간이 증가하였고, 특정한 지점에서 프로세서의 과부하가 발생하여 포인트를 처리하지 못하는 현상이 발생하였다.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.665-674
• /
• 2018

In this paper, we propose a development results of a D-type non-rechargeable lithium battery($Li/SOCl_2$) on improvement in a low cost protection circuit of discharge for domestic military power source. According to this study, we describe a new design and product with 8-bit microcontroller in the protection circuit which can estimate state of health of the battery regardless of occurring an initial voltage delay. Also this paper discuss and facilitate development as solution to a safety about the non-rechargeable lithium batteries. As a result, we verified a quality of the protection circuit by a development test and evaluation(DT&E) process.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1211-1217
• /
• 2000

The three-dimensional finite-difference time-domain (FDTD) method and the two-dimensional quasi-static formulation have been used to calculate the characteristic impedance and the microwave effective index of coplanar waveguide structures on Lithium Niobate ($LiNBO_3$) single crystal substrates with a yttria-stabilized zirconia (YSZ) or $SiO_2$ buffer layer. The results shown can be a good source to predict the modulator characteristics. The effects of the thin buffer layer and anisotropy of the $LiNBO_3$ crystal (x-cut and z-cut) are discussed. The comparison between the FDTD and quasi-static results shows good agreement. In this paper, the efficient modeling technique of the FDTD method for the coplanar waveguide (CPW) structures based on an anisotropic substrate with a thin buffer layer is developed.

• 소성∙가공
• /
• 제17권5호
• /
• pp.322-327
• /
• 2008

LGP is a key component of LCD back light unit because it determines brightness and sharpness of the display image. Usually, it has optical patterns fabricated on the bottom surface. These optical patterns convert point or line sources placed in the side of LGP to plane source at the top surface by changing the propagating direction of the incident light. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme was adopted to find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• 대한원격탐사학회지
• /
• 제28권6호
• /
• pp.661-670
• /
• 2012

Urban forests provide great ecosystem services to population in metropolitan areas even though they occupy little green space in a huge gray landscape. Unfortunately, urbanization inherently results in threatening the green infrastructure, and the recent urbanization trends drew great attention of scientists and policy makers on how to preserve or restore green infrastructure in metropolitan area. For this reason, mapping the spatial distribution of the green infrastructure is important in urban environments since the resulting map helps us identify hot green spots and set up long term plan on how to preserve or restore green infrastructure in urban environments. As a preliminary step for mapping green infrastructure utilizing multi-source remote sensing data in urban environments, the objective of this study is to map vegetation volume by fusing LiDAR and multispectral data in urban environments. Multispectral imageries are used to identify the two dimensional distribution of green infrastructure, while LiDAR data are utilized to characterize the vertical structure of the identified green structure. Vegetation volume was calculated over the metropolitan Chicago city area, and the vegetation volume was summarized over 16 NLCD classes. The experimental results indicated that vegetation volume varies greatly even in the same land cover class, and traditional land cover map based above ground biomass estimation approach may introduce bias in the estimation results.

• 한국표면공학회지
• /
• 제30권4호
• /
• pp.255-261
• /
• 1997

Thin film batteries can be used as a micro power source for electronic in which minute power is needed. In this study, lithium phosphorous oxynitride(LIPON) thin films were deposited as an eletrolyte for lithium ion batteries using RF magentron sputtering of lithium phosphate in N2. Ti was also added into the LIPON films as a second network former to enhance the ioinc conductivity of the films. The optimum conditions for LIPON film deposition were sought and the electrolyte with the conductivity of $2.5 \times 10^{-6}$S/cm was obtained at the condition of RF power 4.4 W/$\textrm{cm}^2$, process pressure 10 mtorr and pure nitrogen ambience. Furthermore, the conductivity of LIPON films was increased from $2.5 \times 10^{-6}$S/cm to $8.6 \times 10^{-6}$S/cm by the doping of 2.4at.% Ti. It was also found that by adding Ti to LIPON films, Li content was increased and nitrogen content that reported having the cross-linking effect on LIPON films was also increased as confirmed XPS.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.479-482
• /
• 2018

Polystyrene superstructure films show faint rainbow color, and this low color saturation limits its wide application. In this paper, polystyrene superstructure films with single bright blue color were prepared by vertical deposition self-assembly method using polystyrene microspheres with average diameter of $310{\pm}10nm$ as raw material. Polystyrene superstructure films were modified by adding nano-carbon powder, and effect of the amount of nano-carbon powde on color performance was studied. The results showed that without addition of nano-carbon powder, the superstructure films showed a faint rainbow color, while with addition of nano-carbon power, the superstructure films exhibited a single bright blue under the same natural light source. Changing the amount of nano-carbon powder addition could adjust color saturation of the film. With increasing the amount of nano-carbon powder addition from 0.008 wt% to 0.01 wt%, color saturation of the superstructure film increased gradually. Further increasing the amount of nano-carbon powder addition to 0.011wt%, color saturation of the superstructure film didn't increase anymore and tended to get dark.