• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.4
• /
• pp.263-269
• /
• 2015

It is necessary to investigate the electrodeposition behavior of uranium and other elements on the cathode in the electrorefining process to recover the uranium selectively from the reduced metals of the electrolytic reduction process since transuranic elements and rare earth elements is dissolved in the LiCl-KCl eutectic salt. Study on separation factors of U, Ce, Y and Nd based on U and Ce was performed to investigate the deposition behavior of the cathode with respect to the concentration of rare earth elements in LiCl-KCl eutectic salt. After electrorefining with constant current mode by using Ce metal as a sacrifice anode, the contents of U, Ce, Y and Nd in the salt phase and the deposit phase of the cathode were analyzed, and separation factors of the elements were obtained from the analyses. Securing conditions of pure uranium recovery in the elctrorefining process was investigated by considering the separation factors with respect to $UCl_3$ and $CeCl_3/UCl_3$ ratio.

• Journal of Adhesion and Interface
• /
• v.24 no.3
• /
• pp.95-99
• /
• 2023

In this study, LiDAR-detectable black materials are synthesized by coating and reduction of titanium dioxide onto plate-type natural mica, which evaluated practical LiDAR verification. In detail, black TiO₂@Mica materials are fabricated by utilizing a sol-gel reaction to coat titanium dioxide onto natural mica, followed by reduction using sodium tetrahydridoborate. Subsequently, Black TiO₂@Mica materials are dispersed in hydrophilic transparent varnish and sprayed onto the glass substrate to assess applicability as paints. As a result, Black TiO₂@Mica-based paints exhibit true blackness (L^*=12.1) and a higher NIR reflectance (30.2 R%). In addition, it was confirmed that as-synthesized Black TiO₂@Mica materials are successfully recognized by a LiDAR sensor. This phenomenon is attributed to Fresnel's reflection law, in which light reflection occurs at the interface between natural mica and titanium dioxide with different refractive indices. In this regard, the findings of the study are expected to contribute to the potential utilization of LiDAR-detectable materials in various fields such as autonomous vehicles, robotics, and drones.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.4
• /
• pp.725-732
• /
• 2008

From old times, we think it is very important to become pregnancy with child and to give birth healthy, as the human gives not just body but also spirit. When we judge pregnancy, we usually check lady's menstrual cycle. But it is too difficult to diagnosis as pregnancy only check that. Therefore feeling pulse has been made use of knowing pregnancy or not, monthly pregnancy states and childbirth. "Haung-di-nei-jing" mentions pregnancy-pulse, for example, "Yin beats and Yang distinguishes", "Shou-shao-yin-mai moves severely", "Lady has some symptoms, but no Xie-mai". Since then, there are many opinions of schools about that. For the period of pregnancy, pulse shows special features, according as the symptoms differ from month to month. When pregnant woman is just about to bear, her pulse changes unusually. In oriental medicine, it is called as Li-jing-mai. Pregnancy-pulse is worth refering to pursue a clinical examination.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.3
• /
• pp.43-51
• /
• 1987

In this work an implementation of SAW based serial type AWQPSK modulator is studied. The SAW AWQPSK modulator consisting of input apodized IDT and output uniform IDT with center frequency of 20 MHz and bit rate of 4MHz has been designed and fabricated on $YZ-LiNbO_3$ substrate. Measured center frequency and null-to-null bandwidth are 20MHz, respectively. The sidelobe suppression is achieved 60dB below the peak mainlobe level. Measured responses meet the theoretical values with tolerable amount of deviation. SAW-based modulator simplifies the implementation of AWQPSK which uses complex pulse shape as a baseband pulse.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.122-126
• /
• 2011

A new phosphorescent cyclometalated heteroleptic iridium (III) complex with an ancillary ligand of 4-azacrownpicolinate was prepared and its metal ion selective phosphorescent chemosensing behavior was investigated. The new iridium (III) complex exhibits notable phosphorescence quenching for Hg2+ in aqueous 50% acetonitrile solution with respect to the selective phosphorescent detection of various metal ions including $Li^+,Na^+,K^+,Cs^+,Mg^{2+},Ca^{2+},Ba^{2+},Fe^{2+},Ni^{2+},Cu^{2+},Zn^{2+},Ag^+,Pb^{2+},Cd^{2+},Cr^{2+},Cr^{3+}$ and $Hg^{2+}$. The phosphorescence quenching for $Hg^{2+}$ increased linearly with increasing concentration of $Hg^{2+}$ in the range of $10{\mu}M-700{\mu}M$ even in the presence of other metal ions, except for $Cu^{2+}$. Consequently, the new iridium (III) complex has the potential to be utilized for the determination of parts per million levels of $Hg^{2+}$ in aqueous acetonitrile media.

• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.535-540
• /
• 1995

The purpose of this research was to investigate effects of glycyrrhizin on the differentiation of preadipocytes, 3T3-Ll cells and to characterize the action of glycyrrhizin that affect the responses of 3T3-Ll cells during differentiation. The differentiation of 3T3-Ll cells was stimulated by glycyrrhizin, and triglyceride contents was increased in the differentiated 3T3-LI cell extracts. Total protein contents was increased by glycyrrhizin or inductive agents in the differentiated 3T3-Ll cell extracts. Calmodulin contents was increased by inductive agents, but the contents was not affected by glycyrrhizin in the differentiated 3T3-Ll cell extracts. The results suggest that glycyrrhizin has a stimulating activity of adipose conversion, but the activity is not related to calmodulin contents during the process of differentiation of 3T3-LI cells.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.383-383
• /
• 2015

하천의 하상고 측량은 하상변동 분석, 서식처 구조 등을 이해하는데 매우 중요한 정보를 제공한다. 하지만, 현재까지 대부분의 하상고 측량은 일정한 간격의 하천 단면 측량에 의해서 행해져 왔다. 최근 GPS와 다중 빔 측심기를 이용하여 하상의 3차원적 형상을 조밀하게 측량하고 있으나 비용이 많이 들기 때문에 긴 하천 구간을 전부 측량하지는 못하고 특정한 부분에 대해서만 집중하고 있다. 항공 LiDAR의 경우 넓은 지역에 대해 신속하고 고해상도로 지형을 측량할 수 있으나 수중 투과 장비가 고가이며, 일반 적색 레이져 기반 LiDAR는 수중을 측정하지 못하여 하상 측량에 한계가 있다. 이에 대한 대안으로 활용할 수 있는 방법은 광학 기반의 원격 탐사에 의한 수심 측량 방법이다. 이 방법은 얕은 수심의 하천에 대한 활용되었는데, 광학 센서 이미지나 항공사진 등을 이용한다. 본 연구에서는 저고도에서 촬영한 고해상도 디지털 항공사진을 이용하여 모래하천의 수심을 추정하였다. 이 방법은 항공사진의 적색 및 녹색 색상값과 현장에서 정밀한 측위 하에 측량한 수심값 사이의 관계를 이용한다. 이를 통해 보정식을 수립하고 검사 자료를 이용하여 검증한 후 항공사진의 해당 지역에 대해 수심 부분을 마스킹 처리하여 하상고를 구축하였다. 검사 자료에 대한 RMSE는 약 12 cm로 나타났다. 이를 활용하여 대상 구간의 3차원적 지형 형상을 구축하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.4897-4902
• /
• 2014

Purpose: To investigate the anticancer effects and underlying mechanisms of parthenolide on HepG2 human hepatocellular carcinoma cells. Materials and Methods: Cell viability was assessed by MTT assay and cell apoptosis through DAPI, TUNEL staining and Western blotting. Monodansylcadaverin(MDC) and AO staining were used to detect cell autophagy. Cell proliferation was assessed by Ki67 immunofluorescence staining. Results: Parthenolide induced growth inhibition in HepG2 cells. DAPI and TUNEL staining showed that parthenolide could increase the number of apoptotic nuclei, while reducing the expression of the anti-apoptotic protein Bcl-2 and elevating the expression of related proteins, like p53, Bax, cleaved caspase9 and cleaved caspase3. Parthenolide could induce autophagy in HepG2 cells and inhibited the expression of proliferation-related gene, Ki-67. Conclusions: Parthenolide can exert anti-cancer effects by inducing cell apoptosis, activating autophagy and inhibiting cell proliferation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1519-1524
• /
• 2012

Background: Human papillomavirus (HPV) infection is the main cause of cervical cancer. Limited epidemiologic data of HPV prevalence are available for women attending hospitals in southern China. This study aimed to evaluate the profiles of HPV infection and cytology status in gynecological outpatients in Chaozhou City. Methods: A total of 2833 eligible women were enrolled. The HPV GenoArray test was used for HPV detection and genotyping. Nearly one half of the HPV positive women received liquid-based cytology test. Logistic regression analysis was performed to assess the predictable effects of age and genotype for categories of abnormal cytology. Results: The prevalence of overall, high-risk, and low-risk HPV infection were 24.5%, 19.5% and 8.4%, respectively. A U-shaped age-specific prevalence curve was observed in overall HPV and high-risk HPV, but not in low-risk HPV, which declined with age increasing. The 6 most common high-risk HPV type in descending order, were types 52, 16, 58, 18, 68, and 33. Age and HPV genotype were both important determinants of abnormal cytology incidence, the older women (>45 years) and those infected with HPV type 16 and/or 18 having the highest risk for abnormal cytology. Conclusion: Our findings support the hypothesis that second-generation HPV prophylactic vaccines including HPV-52 and -58 may offer higher protection for women residing in Chaozhou and neighboring cities in Guangdong.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.136-142
• /
• 2016

As precursors of cathode materials for lithium ion batteries, $Ni_{1/3}Co_{1/3}Mn_{1/3}(OH)_2$ powders are prepared in a continuously stirred tank reactor via a co-precipitation reaction between aqueous metal sulfates and NaOH in the presence of $NH_4OH$ in air or nitrogen ambient. Calcination of the precursors with $Li_2CO_3$ for 8 h at $1,000^{\circ}C$ in air produces dense spherical cathode materials. The precursors and final powders are characterized by X-ray diffraction (XRD), scanning electron microscopy, particle size analysis, tap density measurement, and thermal gravimetric analysis. The precursor powders obtained in air or nitrogen ambient show XRD patterns identified as $Ni_{1/3}Co_{1/3}Mn_{1/3}(OH)_2$. Regardless of the atmosphere, the final powders exhibit the XRD patterns of $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ (NCM). The precursor powders obtained in air have larger particle size and lower tap density than those obtained in nitrogen ambient. NCM powders show similar tendencies in terms of particle size and tap density. Electrochemical characterization is performed after fabricating a coin cell using NCM as the cathode and Li metal as the anode. The NCM powders from the precursors obtained in air and those from the precursors obtained in nitrogen have similar initial charge/discharge capacities and cycle life. In conclusion, the powders co-precipitated in air can be utilized as precursor materials, replacing those synthesized in the presence of nitrogen injection, which is the usual industrial practice.