• The Journal of the Convergence on Culture Technology
• /
• v.5 no.2
• /
• pp.355-360
• /
• 2019

In this study, the structural stability of the railway level crossing system using rubber panel for high speed lines was investigated by applying the specification for wind load conditions (Train gust) of high speed train (300km/h and 360km/h). A finite element analysis using three-dimensional modeling was carried out by applying the field conditions that was installed with the complicated configuration of the rubber plate panel system. As a result of this study, the structural stability of the rubber plate panel system for high speed train gust was analytically verified.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.768-780
• /
• 2023

The application of unmanned aerial vehicles (UAVs) has recently attracted considerable interest in various areas. A three-dimensional multiple-input multiple-output concentric two-hemisphere model is proposed to characterize the scattering environment around a vehicle in an urban UAV-to-vehicle communication scenario. Multipath components of the model consisted of lineof-sight and single-bounced components. This study focused on the key parameters that determine the scatterer distribution. A time-variant process was used to analyze the nonstationarity of the proposed model. Vital statistical properties, such as the space-time-frequency correlation function, Doppler power spectral density, level-crossing rate, average fade duration, and channel capacity, were derived and analyzed. The results indicated that with an increase in the maximum scatter radius, the time correlation and level-crossing rate decreased, the frequency correlation function had a faster downward trend, and average fade duration increased. In addition, with the increase of concentration parameter, the time correlation, space correlation, and level-crossing rate increased, average fade duration decreased, and Doppler power spectral density became flatter. The proposed model was compared with current geometry-based stochastic models (GBSMs) and showed good consistency. In addition, we verified the nonstationarity in the temporal and spatial domains of the proposed model. These conclusions can be used as references in the design of more reasonable communication systems.

• Journal of Coastal Disaster Prevention
• /
• v.4 no.3
• /
• pp.119-131
• /
• 2017

Global warming under the influence of climate change and its direct impact on glacial and sea level are known issue. However, there is a lack of research on an indirect impact of climate change such as coastal structure design which is mainly based on a frequency analysis of water level under the stationary assumption, meaning that maximum sea level will not vary significantly over time. In general, stationary assumption does not hold and may not be valid under a changing climate. Therefore, this study aims to develop a novel approach to explore possible distributional changes in annual maximum sea levels (AMSLs) and provide the estimate of design water level for coastal structures using a multiple non-crossing quantile regression based nonstationary frequency analysis within a Bayesian framework. In this study, 20 tide gauge stations, where more than 30 years of hourly records are available, are considered. First, the possible distributional changes in the AMSLs are explored, focusing on the change in the scale and location parameter of the probability distributions. The most of the AMSLs are found to be upward-convergent/divergent pattern in the distribution, and the significance test on distributional changes is then performed. In this study, we confirm that a stationary assumption under the current climate characteristic may lead to underestimation of the design sea level, which results in increase in the failure risk in coastal structures. A detailed discussion on the role of the distribution changes for design water level is provided.

• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.16-25
• /
• 2011

This study aimed to evaluate factors related to the ability of ambulatory patients with cerebral palsy (CP) to walk over vertical and horizontal obstacles. Twenty patients with spastic CP who were able to walk independently for at least 10 m with or without walking devices were recruited for the study. Participants were required to walk over small obstacles (1, 4, and 8 cm in height or width; total of 6 conditions). A 'fail' was recorded when either the lower limbs or the walking device contacted the obstacle. Linear regression analyses were used to determine the effects of age, sex, walking devices, eyeglasses, subtype (hemiplegia or diplegia), ankle foot orthoses, functional level, and score of body mass index on the ability of obstacle crossing. Fifteen participants (75%) failed to adequately clear the foot or walking device over obstacles in at least 1 condition. The chance of failure in crossing vertical obstacle was affected by the use of ankle foot orthoses, eyeglasses, gender, and CP subtype (p<.05). The failure rate crossing horizontal obstacle was affected by CP subtype. These findings suggest that rehabilitation procedures should (1) consider the clinical characteristics of patients in order to prepare them to be more independent while performing daily activities, and (2) incorporate environmental conditions that patients encounter at home and in the community.

• Korean Journal of Environment and Ecology
• /
• v.22 no.3
• /
• pp.268-279
• /
• 2008

This study is aimed at typifying the crossing structure and inquiring into the characteristics of vegetation distribution by type targeting Dorimcheon(stream), Banghakcheon(stream), Seongnaecheon(stream) and some sections of Yangjaecheon(stream) in Seoul through the establishment of basic data for restoring vegetation in urban stream. This research classified the crossing structure into 56 slope types and 31 vertical types in combination with the three items, such as bank slope(vertical style, slope style) of bank, absence or presence of waterside, and revetment structure. This research derived nine slope types including SB1 (revetment of low water level-revetment with vegetation, and revetment of high water level-nature riverside) including SG5(revetment of low water-concrete, and revetment of high water level-riprap work), and three vertical types, such as VH4(bank revetment-wet masonry), and VH7(bank revetment - concrete )from the target survey areas. Among these, both revetment of low water level and high water level were found to be distributed on the longest section as the type of SG7 and VG7 structured in concrete. As a result of inquiry and analysis of micro topography structure and vegetation structure of eight major types, this research could find out the influence of crossing structure on plant vegetation according to the characteristic by typified item, but there appeared no distinct characteristic of vegetation distribution by crossing structure.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.193-200
• /
• 2010

Current rose cultivars are all composed of heterozygous genome due to long history of out crossing including interspecific hybridization. It has been adapted by artificial selection and crossing by breeders that mainly based on the crossing with fertile pollen derived from inter- or intra-specific hybridization. Pollen viability and germination ability tests provide valuable information for the designing of parentage for more successful breeding efficacy. In this study, we tested the pollen viability and germination ability in seven rose cultivars to find any relationship among several factors including pollen size, ploidy levels, and crossing compatibility. The pollen viability showed wide ranges from 39% 'Pinocchio' as minimum to 82% 'Scarlet Mimi' as maximum, whereas pollen germination rate were from 1% 'Mini Rosa' to 41% 'Scarlet Mimi' as a highest. Pollen size ranged from 41.3 to $45.4{\mu}m$ in large sized pollen and 30.7 to $37.4{\mu}m$ in small sized pollen. The mean diameter of large sized pollen is approximately 10-40% bigger than that of small sized pollen. There are positive relationships among ploidy level, total chromosome length, and pollen size. Crossing list showed that seed setting ratio and seed germination were related to pollen viability, pollen germination, and ploidy level.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.90-98
• /
• 1996

An auditory model is proposed for robust speech recognition in noisy environments. The model consists of cochlear bandpass filters and nonlinear stages, and represents frequency and intensity information efficiently even in noisy environments. Frequency information of the signal is obtained by zero-crossing intervals, and intensity information is also incorporated by peak detectors and saturating nonlinearities. Also, the robustness of the zero-crossings in estimating frequency is verified by the developed analytic relationship of the variance of the level-crossing interval perturbations as a function of the crossing level values. The proposed auditory model is computationally efficient and free from many unknown parameters compared with other auditory models. Speaker-independent speech recognition experiments demonstrate the robustness of the proposed method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.85-93
• /
• 2016

According to Traffic Accident Statistics, the fatalities of accident while crossing is over represented. So, more active safety countermeasure should be considered to reduce the frequency and degree of severity of pedestrian-crossing involved accidents. The study analyses the safety effects of the Crossing Safety Assistant System which is composed of Led-embedded crosswalk lightings, text displayer and audio waning device for the safety consciousness both pedestrian and vehicles at crosswalk area. Operating speed of vehicles is reduced with statistical significance, and the level of vigilance expressed by pedestrian head movement to check out the vehicle existence is improved.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.163-169
• /
• 2003

In order to develop domestic railway technology, it is necessary that manufacturing technology of turnout should be kept up with update level, because turnout is the core component of high speed railway. Manganese crossing made of high manganese alloy steel is a important component of turnout. So far, this could not have been welded with rail steel due to metallic problem in Korea. However, joint technology hereunder between manganese crossing and rail by using Flash Butt Welding which is developed by Kangwon Railtech Co., Ltd is the state of the art and enable to realize rail continuousness in turnout section, speed up train velocity, reduce maintenance cost, and enhance riding quality.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.2
• /
• pp.191-194
• /
• 2012

The observed distribution of a blending-corrected sample of Einstein ring crossing times, $t_E$, for microlensing events toward the galactic bulge/bar are analyzed. An inspection of the distribution of crossing times suggests that it may be bimodal, indicating that two populations of lenses could be responsible for observed microlensing events. Given the possibility that microlensing in this direction can be due to the two most common classes of stars, main-sequence and white dwarf, we analyze and show via Monte Carlo simulations that the observed bimodality of $t_E$ can be derived from their accepted mass functions, and the density distributions of both stellar populations in the galactic disk and bulge/bar, with a transverse velocity distribution that is consistent with the density distribution. Kolmogorov-Smirnov (KS) one sample tests shows that a white dwarf population of about 25% of all stars in the galaxy agrees well with the observed bimodality with a KS significance level greater than 97%. This is an expanded and updated version of a previous investigation (Wickramasinghe, Neusima, & Struble, in Mao 2008). A power-point version of the talk, with introductory figures, is found at: https://sites.google.com/site/rhkochconference/agenda-1/program.