• 한국통신학회논문지
• /
• 제12권5호
• /
• pp.478-491
• /
• 1987

본 논문에서는 정현파 입력 신호의 위상을 PGZC(Positive Going Zero Crossing)에 대해 주기당 한번씩 추적하는 디지털 위상동기회로(DPLL)의 성능 개선을 위해 반주기마다 표본화를 행함으로써 위상오차를 감소시킬 수 있는 DPLL을 제시하였다. 제안된 DPLL은 두개의 샘플러에 의해 정현파 입력 신호의 위상을 PGZG에 대해 주기당 2회씩 추적함으로써 기존의 DPLL보다 동기대역의 손실없이 정상상태 위상오차 변동의 범위를 전체적으로 1/2 정도 감소시킬 수 있었다. 또한, 연속 표본간의 오차간격과 양자화 레벨이 동일할 경우에 있어서 반주기 표본화를 이용하는 DPLL이 기존의 DPLL보다 빠른 동기를 이루게 됨을 알 수 있었다. 이 제시된 루우프에 대한 해석 결과를 실제적으로 요구되는 조건들에 대하여 컴퓨터 시뮬레이션 행함으로써 검증하였다.

• 한국건축시공학회지
• /
• 제19권4호
• /
• pp.331-339
• /
• 2019

도심과 사회기반시설의 확장에 대한 수요로 인해 군사시설의 이전이나 시설의 지하화가 지속적으로 요구되고 있다. 그러나 탄약시설과 같은 시설을 횡단할 때에는 탄약이 우발적으로 폭발하지 않도록 고도의 안전성 평가가 선행되어야 한다. 이에 지중 구조물의 건설을 위한 발파작업이 지상의 탄약시설에 미치는 영향을 분석하기 위해 국방부와 한국철도시설공단간 협의에 의해 진행되는 신안선 복선 전철 설계구간 중 군사 보안구역을 통과하여 건설되는 터널구간에 대해 사례연구를 실시하였다. 폭발현상에 의한 진동의 속도를 수치해석 프로그램인 GTS-NX를 활용하여 예측하였고 문헌조사를 통해 모든 형태의 구조물에 대해서도 안전에 영향을 미치지 않는 0.2cm/sec의 지반진동속도를 안전성 평가기준으로 제시하였다. 본 연구에서 활용된 안전성 평가지표와 절차는 향후 탄약시설을 횡단하는 사회기반시설 계획 시 안전성 평가의 지표로 활용될 수 있을 것이다.

• 한국지진공학회논문집
• /
• 제14권1호
• /
• pp.25-34
• /
• 2010

비선형 이력거동을 가지는 교량 구조계에 지진하중이 작용하였을 때 파괴확률을 추정할 수 있는 기법을 제시하였다. 교량 구조계는 지진하중이 작용할 때 이중선형 이력거동을 보이는 단자유도 진동계로서 모델링하였다. 교량의 파괴는 상단의 변위 응답이 지진 지속시간 동안 정해진 한계 상태 값을 최초로 넘어설 때 발생하는 것으로 정의하였다. 지진하중에 대한 비선형 구조계의 최초통과확률을 추정하기 위하여, 단위시간 동안 한계상태를 넘어서는 빈도수를 계산하는 crossing theory를 적용하였다. 단위시간 동안의 한계상태 초과 빈도수 추정을 위하여 필요한, 비선형 구조계의 응답과 응답의 미분값 간의 결합확률밀도함수를 추정하기 위한 기법으로서, Non-Gaussian closure 기법을 제시하였다. 다양한 지반운동 특성을 가지는 다수의 인공지진 가속도 시간이력을 생성하여 교량의 동적 특성에 따른 파괴확률을 추정하였다. 제시된 기법을 사용한 결과 얻어진 파괴확률 값을 crude Monte-Carlo 시뮬레이션을 통하여 얻어진 정해 및 기존의 방법을 적용하여 얻어진 파괴확률 값과 비교함으로써 제시된 파괴확률 추정 기법의 정확성과 효율성을 검증하였다.

• 대기
• /
• 제26권2호
• /
• pp.321-336
• /
• 2016

Damages caused by torrential rain occur every year in Korea and summer time convection can cause strong thunderstorms to develop which bring dangerous weather such as torrential rain, gusts, and flash flooding. On 6 August 2013 a sudden torrential rain concentrated over the inland of Southern Korean Peninsula occurred. This was an event characterized as a mesoscale multicellular convection. The purpose of this study is to analyze the conditions of the multicellular convection and the synoptic and mesoscale nature of the system development. To this end, dynamical and thermodynamic analyses of surface and upper-level weather charts, satellite images, soundings, reanalysis data and WRF model simulations are performed. At the beginning stage there was a cool, dry air intrusion in the upper-level of the Korean Peninsula, and a warm humid air flow from the southwest in the lower-level creating atmospheric instability. This produced a single cell cumulonimbus cloud in the vicinity of Baengnyeongdo, and due to baroclinic instability, shear and cyclonic vorticity the cloud further developed into a multicellular convection. The cloud system moved southeast towards Seoul metropolitan area accompanied by lightning, heavy precipitation and strong wind gusts. In addition, atmospheric instability due to daytime insolation caused new convective cells to develop in the upstream part of the Sobaek Mountain which merged with existing multicellular convection creating a larger system. This case was unusual because the system was affected little by the upper-level jet stream which is typical in Korea. The development and propagation of the multicellular convection showed strong mesoscale characteristics and was not governed by large synoptic-scale dynamics. In particular, the system moved southeast crossing the Peninsula diagonally from northwest to southeast and did not follow the upper-level westerly pattern. The analysis result shows that the movement of the system can be determined by the vertical wind shear.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.29-32
• /
• 2002

Studies till date suggest the existence of a fetal biological clock in suprachiasmatic nuclei entrained by the circadian signal from mother. Melatonin from maternal pineal gland reaches to the fetus by crossing every biological barrier including placenta, hence fetuses were exposed to similar melatonin variation as their mother. Experimental modulations of maternal pineal gland activity of pregnant females either by exposing the them to different photoperiodic schedules or by exogenous melatonin treatments till the date of parturition, regulated the fetal plasma level of melatonin, thereby the prenatal (fetal) growth and development. This clearly suggests the maternal transport of melatonin to their fetus through placenta since fetal retina-hypothalamic tract was incomplete. An extension of experimental schedules till 60 days of post-partum period regulated the neonatal pineal gland activity and gonadal maturation along with their plasma levels of melatonin and sex steroids suggesting clearly the phenomenon of maternal transfer of melatonin to their young ones during the post-natal period, when the neonates were solely dependent on the mother's milk for their nutrition and energetic demands. On the basis of above observations we may suggest that the maternal pineal gland activity regulate the prenatal development by passing its melatonin to fetus via placenta and post-natal growth and sexual maturation by passing maternal melatonin to neonates via milk. Hence, the photoperiod perceived by mother is translated into the maternal plasma level of melatonin which not only regulates the prenatal but also the post-natal growth and sexual maturation of neonates.

• 대한산업공학회지
• /
• 제25권3호
• /
• pp.330-335
• /
• 1999

The goal of the study is to determine the most sensitive parameter to represent the degree of muscle force and fatigue. Various numerical parameters such as the first coefficient of Autoregressive (AR) Model, Root Mean Square (RMS), Zero Crossing Rate (ZCR), Mean Power Frequency (MPF), Median Frequency (MF) were tested in this study. Ten healthy male subjects participated in the experiment. They were asked to extend their trunk by using the right and left erector spinae muscles during a sustained isometric contraction for twenty seconds. The force levels were 15%, 30%, 45%, 60%, and 75% of Maximal Voluntary Contraction (MVC), and the order of trials was randomized. The results showed that RMS was the best parameter to measure the force level of the muscle, and that the first coefficient of AR model was relatively sensitive parameter for the fatigue measurement at less than 60% MVC condition. At the 75% MVC, however, both MPF and the first coefficient of AR Model showed the best performance in quantification of muscle fatigue. Therefore, the sensitivity of measurement can be improved by properly selecting the parameter based upon the level of force during a sustained isometric condition.

• Advances in environmental research
• /
• 제6권2호
• /
• pp.139-146
• /
• 2017

The purpose of this study was to determine the present air pollutant concentrations and predicted levels for next 30 years in urban environment of Karachi city. For that, a total of fifty measurements were made for each twenty selected locations of the city. The locations were selected on the basis of land use pattern such as residential, commercial, industrial settlements, open areas, congested traffic and low traffic areas for investigation of air pollutants variability and intensity. The measurements were taken continuously for six months period using PM Meter, Model AEROCET 531 and Ambient Air Quality Meter, Model AAQ 7545. The concentration of air pollutants were found higher at Al Asif Square and Maripur Road due to higher intensity of traffic and at Korangi Crossing because of industrial areas. The level of pollutants was lower at Sea View owing to lower traffic congestion and transportation of pollutants by sea breezes.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.999-1006
• /
• 2004

Recently, the ride comfort problem becomes increasingly important because of today's needs for train speedup. The railway has the track irregularities which cause vibrations, such as rail joints, turnout, level crossing, transition corves and super-elevation ramps, and variations in the track level(z-axis) and the gauge(y-axis). In Korea, the service run of the high speed train has been made since the 1st of April, 2004. The commercial high-speed trains must be run on the compound lines which are composed of high-speed line and conventional line. The high speed lines in both Kyoungbu line and Honam line have 57.5％ and 33.8％, respectively In this Paper, the ride comfort has been reviewed by the various experimental methods when the high-speed trains are operated on both Kyoungbu line and Honam line. The results show that the high-speed train has no problems from the viewpoint of the comfort ride during the operation on the high speed line and conventional line.

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.325-333
• /
• 2003

An analysis of the electronic structure and bonding in the ternary silicide YNiSi₃is made, using extended Huckel tight-binding calculations. The YNiSi₃structure consists of Ni-capped Si₂dimer layers and Si zigzag chains. Significant bonding interactions are present between the silicon atoms in the structure. The oxidation state formalism of $(Y^{3+})(Ni^0)(Si^3)^{3-}$ for YNiSi₃constitutes a good starting point to describe its electronic structure. Si atoms receive electrons from the most electropositive Y in YNiSi₃, and Ni 3d and Si 3p states dominate below the Fermi level. There is an interesting electron balance between the two Si and Ni sublattices. Since the ${\pi}^*$ orbitals in the Si chain and the Ni d and s block levels are almost completely occupied, the charge balance for YNiSi₃can be rewritten as $(Y^{3+})(Ni^{2-})(Si^{2-})(Si-Si)^+$, making the Si₂layers oxidized. These results suggest that the Si zigzag chain contains single bonds and the Si₂double layer possesses single bonds within a dimer with a partial double bond character. Strong Si-Si and Ni-Si bonding interactions are important for giving stability to the structure, while essentially no metal-metal bonding exists at all. The 2D metallic behavior of this compound is due to the Si-Si interaction leading to dispersion of the several Si₂π bands crossing the Fermi level in the plane perpendicular to the crystallographic b axis.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.435-440
• /
• 2006

The Reduced Vertical Separation Minimum (RVSM), which is the reduced minimum from 2,000 ft to 1,000 ft at flight levels (FL) between 290 and FL410 inclusive, was implemented in 30 September 2005 within the Japanese domestic airspace. Prior to the implementation, safety assessment for the airspace in assumed RVSM environments was carried out. Some model parameter values of collision risk model were estimated using flight plan (progress) data and radar data. An estimate of vertical collision risk including operational risk was calculated using these together with given parameter values. The results obtained from this analysis are as follows. (1) Contribution of the vertical collision risk for the crossing routes is about 9 percents of the total technical risk. (2) The estimate of the collision risk is $4.1{\times}10^{-9}$ [fatal accidents / flight hour] and the value is smaller than a maximum allowable level of collision risk, i.e. $5{\times}10^{-9}$ [fatal accidents / flight hour], called the Target Level of Safety.