• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.42-50
• /
• 2016

Recently, researches about the communication between LED array and the camera (alias 'Visual-MIMO'), have been actively conducted, and the application to the vehicle and a smart phone is expected to be maximized. Since the bit error may occur if the ISI is severe in a LED array, it is necessary to switch from the multiplexing to the diversity mode. In this paper, according to the use or not of a reference array pattern, a method for determining the transition time to the diversity mode is suggested and verified. When using the reference pattern, it determines the transition time to the diversity mode from the multiplexing using the brightness information of the received image. If the reference array pattern is not used, the size of LED array compared to the entire image according to the distance is used and the size of the LED array at the distance of a severe ISI may be used for the determination of transition time to the diversity. Finally, the proposed method is verified through the simulation and hardware experiments as well as by analyzing the performance in accordance with the ISI level and the distance.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.12
• /
• pp.639-647
• /
• 2001

We present an integrated optical microswitch, composed of silicon waveguides, gold-coaled silicon micromirrors, and electrostatic contact actuators, for applications to the optical signal transceivers. For a low switching voltage, we modify the conventional curled electrode microactuator into a electrostatic microactuator with touch-down beams. We fabricate the silicon waveguides and the electrostatically actuated micromirrors using the ICP etching process of SOI wafers. We observe the single mode wave propagation through the silicon waveguide with the measured micromirror loss of $4.18\pm0.25dB$. We analyze major source of the micromirror loss, thereby presenting guidelines for low-loss micromirror designs. From the fabricated microswitch, we measure the switching voltage of 31.74V at the resonant frequency of 6.89kHz. Compared to the conventional microactuator, the present contact microactuator achieves 77.4% reduction of the switching voltage. We also discuss a feasible method to reduce the switching voltage to 10V level by using the electrode insulation layers having the residual stress less than 30MPa.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.146-159
• /
• 2015

Since the power capacity needed for the propulsion of large ships is very large, a multiphase AC induction propulsion mode is generally adopted to meet the higher requirements of reliability, redundancy and maintainability. This paper gives a detailed description of the development of a 20MW fifteen-phase PWM driver for advanced fifteen-phase propulsion induction motors with a special third-harmonic injection in terms of the main circuit hardware, control system design, experiments, etc. The adoption of the modular design method for the main circuit hardware design can make the enclosed mechanical structure simple and maintainable. It can also avoid the larger switch stresses caused by the multiple turn on of the IGBTs in conventional large-capacity converter systems. The use of the distributed controller design method based on a high-speed fiber-optic ring net for the control system can overcome such disadvantages as the poor reliability and long maintenance times arising from the conventional centralized controller which is designed according to point-to-point communication. Finally, the performance of the 20MW PWM driver is verified by experimentation on a new fifteen-phase induction propulsion motor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.13-18
• /
• 2005

The variation of discharge characteristics of an ac PDP was observed with the charge of scan electrode driving circuit. Conventional scan electrode driving circuit provides two switches per one scan line, and the suggested one can be constituted by one switch per one scan line with the consideration of capacitive load characteristic of an ac PDP. To verify the workability of the suggested scheme, the performances of the ac PDP was investigated. The dynamic voltage margin was slightly decreased with the adoption of the suggested scheme, which is estimated to result from the misfiring of unselected discharge cells due to the deformation of voltage level of the neighboring scan electrode. In the observation of the delay characteristics of addressing discharge, the performances of the conventional circuit and the suggested one are assumed to be equivalent.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.477-483
• /
• 2011

Existing switching system that is one of the ways which are used for DC/DC power converter is classified to hard-switching system and resonant-soft-switching system, generally. Hard-switching system is inefficient because the power loss of the switching element is large when it is been to trun on or turn off. And resonant-soft-switching system have the defect that need to add the another reactor and capacitor that make it expensive and huge. This paper suggest the ZVS Full-Bridge power converter contrcution of novel switching system for the overcoming these shortcomings. In Suggested soft-switching system, the front of buck converter at diode current, switch is changing on and off at the part of full-bridge converter's zero voltage part. as the result that is possible to be ZVS excepting the reactor and capacitor. also to verify the reasonability of the isolated ZVS full-bridge DC/DC converter as previously suggested, we produced the 500[W] level DC/DC converter and enforced the simulation for Psim, and then it able to conform the superiority of the DC/DC converter's efficient.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.125-129
• /
• 2010

Stateless computing supports a mobility of computing environment easily. It is becoming a major technology for securing personal user's information on shared computing environment. With the advance of virtualization technology and cloud computing, stateless computing is an essential part of personal computing environment connectivity (user's setting and data is stored in remote server or some storage, and it can be restored at any computing environment) In this paper, we propose uPC player that supports stateless computing execution environment on Windows. uPC player provides Windows operating system to user by using an uPC OS virtualization module. In this paper, we leverage how uPC player is designed and implemented for supporting a stateless computing execution environment. uPC player provides a desktop switch between host-system execution environment and uPC virtual execution environment. And it needs just one second for loading uPC virtual execution environment by using OS virtualization-based technique.

• Korean Journal of Clinical Pharmacy
• /
• v.28 no.4
• /
• pp.263-272
• /
• 2018

Nonprescription drugs have become increasingly important in Korean healthcare. By leveraging lower-cost drugs and reducing expenditure associated with fewer physician visits, the nonprescription segment can deliver tremendous value to individual consumers and the Korean healthcare system. Many countries have provided simpler and more rapid routes to market entry for qualifying nonprescription drug products, using the established data on drug safety and efficacy, as well as public and professional opinion. In US, the FDA waived the pre-approval process for over-the-counter (OTC) drugs marketed through the OTC Monograph Process. In Australia and Canada, different OTC product application levels are defined, with a reduced level of assessment required when the risks to consumers are considered low. Japan established a new OTC evaluation system in 2014 to facilitate the Rx-to-OTC switch process. The legislative framework for medicinal products in the European Union allows for drugs to be approved with reference to appropriate bibliographic data for old active substances with well-established uses. Through a comparison of the regulatory framework and the requirements for nonprescription approval process in different countries, several ways to improve regulatory practice for the evaluation of nonprescription drugs in Korea have been suggested.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.4
• /
• pp.258-264
• /
• 2019

Objectives: The perceptions of family-planning (FP) acceptors regarding contraception influence the reasons for which they choose to switch their method of contraception. The objective of this study was to analyze the perceptions of contraception and rationales for switching contraceptive methods among female FP acceptors in West Nusa Tenggara, Indonesia. Methods: This study involved the analysis of secondary data from the Improve Contraceptive Method Mix study, which was conducted in 2013 by the Center for Health Research, University of Indonesia. The design of the study was cross-sectional. We performed 3 stages of sampling using the cluster technique and selected 4819 women who were FP acceptors in West Nusa Tenggara Province, Indonesia as the subjects of this study. The data were analyzed using multiple logistic regression. Results: The predominant pattern of switching contraceptive methods was switching from one non-long-term method of contraception to another. Only 31.0% of the acceptors reported a rational pattern of switching contraceptive methods given their age, number of children, and FP motivations. Perceptions of the side effects of contraceptive methods, the ease of contraceptive use, and the cost of the contraceptives were significantly associated (at the level of ${\alpha}=0.05$) with rational patterns of switching contraceptive methods. Conclusions: Perceptions among FP-accepting women were found to play an important role in their patterns of switching contraceptive methods. Hence, fostering a better understanding of contraception through high-quality counseling is needed to improve perceptions and thereby to encourage rational, effective, and efficient contraceptive use.

• Journal of Environmental Health Sciences
• /
• v.45 no.3
• /
• pp.258-266
• /
• 2019

Objectives: In this study, blood lead was analyzed using graphite furnace atomic absorption spectrometry (GF-AAs) and inductively coupled plasma mass spectrometry (ICP-MS). We tried to examine the difference and consistency of the analytical values and the applicability of the analytical method. Methods: We selected 57 people who agreed to participate in this study. After confirming the linearity of the calibration standard curves in GF-AAs and ICP-MS, the concentrations of lead in quality control material and samples were measured, and the degree of agreement was compared. Results: The detection limit of the ICP-MS was lower than that of GF-AAs. The coefficient of variation of reference materials was shown to be stable in the ICP-MS and GF-AAs. When the correspondence between the two equipments was verified by bias of the analysis values, a concordance was shown, and approximately 98% of the ideal reference lines were present within ${\pm}40%$ of the deflection. Conclusion: GF-AAs showed high sensitivity to single heavy metal analysis, but it took much time and showed higher detection limit than ICP-MS. Therefore, it would be considered necessary to switch to ICP-MS analysis method, considering that the level of lead exposure is gradually decreasing.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.8-8
• /
• 2019

The stringent response (SR) is characterized as a bacterial defense mechanism in response to various growth-inhibiting stresses. It is activated by accumulation of a small nucleotide regulator, (p)ppGpp, and induces global changes in bacterial transcription and translation. Recent work from our group has shown that (p)ppGpp plays a critical role in virulence and survival in Vibrio cholerae. The genes, relA and relV, are involved in the production of (p)ppGpp, while the spoT gene encodes an enzyme that hydrolyzes it in V. cholerae. A mutant strain defective in (p)ppGpp production (i.e. ${\Delta}relA{\Delta}relV{\Delta}spoT$ mutant) lost the ability to produce cholera toxin (CT) and lost their viability due to uncontrolled production of organic acids, when grown with extra glucose. In contrast, the ${\Delta}relA{\Delta}spoT$ mutant, a (p)ppGpp overproducer strain, produced enhanced level of CT and exhibited better growth in glucose supplemented media via glucose metabolic switch from organic fermentation to acetoin, a neutral fermentation end product, fermentation. These findings indicates that (p)ppGpp, in addition to its well-known role as a SR mediator, positively regulates CT production and maintenance of growth fitness in V. cholerae. This implicates SR as a promising drug target, inhibition of which may possibly downregulate V. cholerae virulence and survival fitness. Therefore, we screened a chemical library and identified a compound that induces medium acidification (termed iMAC) and thereby loss of wild type V. cholerae viability under glucose-rich conditions. Further, we present a potential mechanism by which the compound inhibits (p)ppGpp accumulation. Together, these results indicate that iMAC treatment causes V. cholerae cells to produce significantly less (p)ppGpp, an important regulator of the bacterial virulence and survival response, and further suggesting that it has a therapeutic potential to be developed as a novel antibacterial agent against cholera.