• 비파괴검사학회지
• /
• 제33권3호
• /
• pp.293-298
• /
• 2013

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1891-1896
• /
• 2003

The bubble motion during nucleate boiling in a microchannel is investigated numerically. The liquid-vapor interface is tracked by a level set method which is modified to include the effects of phase change at the interface and contact angle at the wall. The computations are made for various channel sizes, liquid flow rates, and contact angles. Based on the numerical results, the bubble growth pattern and its effect on the flow and heat transfer are discussed.

• 한국전산유체공학회지
• /
• 제6권3호
• /
• pp.19-26
• /
• 2001

An Eulerian-Lagrangian method, so called immersed boundary method, is used for analysing viscous flow around arbitrary bodies, where governing equations are discretized on a regular grid by using a finite volume method. To improve the accuracy of flow near body boundaries, a second-order accurate interpolation scheme is used and a level-set based grid deformation method is presented to construct the adaptive grids around body boundaries. The present scheme is used to simulate steady flow around a semicircular cylinder mounted on the bottom of flow domain and calculated results are validated by results of a body fitted grid method. Finally, present method is applied to a complex flow around multi body and the usefulness is checked by investigating calculated results.

• 한국멀티미디어학회논문지
• /
• 제20권9호
• /
• pp.1491-1501
• /
• 2017

In this paper, we propose a method to measure respiration rate by dividing the respiration related region in depth image using level set method. In the conventional method, the respiration related region was separated using the pre-defined region designated by the user. We separate the respiration related region using level set method combining shape prior knowledge. Median filter and clipping are performed as a preprocessing method for noise reduction in the depth image. As a feasibility test, respiration activity was recorded using depth camera in various environments with arm movements or body movements during breathing. Respiration activity was also measured simultaneously using a chest belt to verify the accuracy of calculated respiration rate. Experimental results show that our proposed method shows good performance for respiration rate estimation in various situation compared with the conventional method.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.551-555
• /
• 2010

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models. In level set method, in the mean time, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We viscosity, thermal conductivity, electrical conductivity, and permittivity, can be an alternative. I.e., the WHM gives more accurate results than the WAM method in certain circumstances. The interpolation scheme should be selected considering various characteristics including type of property, ratio of property of two fluids, geometry of interface, and so on.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.559-564
• /
• 2008

A prediction of binary droplets collision is important in the formation of falling drops and the evolution of sprays. The droplet velocity, impact parameter and drop-size ratio have influence on the interaction of the droplets. By the effect of these parameter, the collision processes are generated with the complicated phenomena. The droplet collision can be classified into four interactions such as the bouncing, coalescence, reflexive separation and stretching separation. In this study, the two-phase flow of the droplet collision was simulated numerically by using the Level Set method. 2D axi-symmetric simulations on the head-on collisions in the coalescence and reflexive separation, and 3D simulation on the off-center collisions in the coalescence and stretching separation were performed. These numerical results showed good agreements with the experimental and analytical results. For tracking the identity of droplets after the collision, transport equation for the volume fraction of the each initial droplet were used. From this, the identities of droplets were analyzed on the collision of droplets having different size.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.340-346
• /
• 2008

A level-set method is developed for computation of drop motions in various engineering applications. Compared with the volume-of-fluid method based on a non-smooth volume-fraction function, the LS method can calculate an interface curvature more accurately by using a smooth distance function. Also, it is straightforward to implement for two-phase flows in complex geometries unlike the VOF method requiring much more complicated geometric calculations. The LS method is applied to simulation of inkjet process, thin film pattering and droplet collisions.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.340-346
• /
• 2008

A level-set method is developed for computation of drop motions in various engineering applications. Compared with the volume-of-fluid method based on a non-smooth volume-fraction function, the LS method can calculate an interface curvature more accurately by using a smooth distance function. Also, it is straightforward to implement for two-phase flows in complex geometries unlike the VOF method requiring much more complicated geometric calculations. The LS method is applied to simulation of inkjet process, thin film pattering and droplet collisions.

• 한국멀티미디어학회논문지
• /
• 제5권4호
• /
• pp.372-385
• /
• 2002

본 논문에서는 실시간 멀티미디어 데이터를 위한 효율적인 버퍼 교체 기법을 제안한다. 제안하는 기법은 실시간 특성을 고려하기 위해 다단계의 우선순위 레벨을 갖는다. 각 우선순위 레벨은 처음 참조된 데이터를 위한 콜드 셋(cold set)과 재 참조된 데이터를 위한 핫 셋(hot set)으로 구분된다. 희생 데이터 선정 작업은 버퍼 할당을 요구하는 트랜잭션의 우선순위 레벨보다 낮은 레벨만을 대상으로 콜드 셋의 최하위 레벨부터 핫 셋의 최상위 레벨까지 순차적으로 수행된다. 콜드 셋의 각 레벨에서는 가장 큰 미디어부터 교체 대상으로 선정하고, 핫 셋의 각 레벨에서는 가장 긴 참조 간격을 갖는 미디어부터 선정한다. 이로 인해 한정된 버퍼 공간에 많은 수의 인기 있는 미디어를 오랫동안 유지시킬 수 있으므로 버퍼 히트 비율이 증가되고, 많은 수의 서비스 요청을 처리할 수 있게 되어 전체적인 시스템 성능은 향상된다. 제안하는 기법에 대한 성능 평가에서는 Priority-Hints 기법을 대상으로 버퍼 히트 비율 및 트랜잭션의 마감시간 초과 비율을 비교한다. 이를 통해 기존의 기법들보다 제안하는 기법의 성능이 뛰어남을 보인다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.84-87
• /
• 2009

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models.