• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1995.11a
• /
• pp.51-58
• /
• 1995

The importance of the risk analysis tool has been recognized and its use also has been emphasized by a number of researchers recently The methodology were examined but neither algorithms nor practical applications have been implemented or practiced in Korea. In this paper, the architecture of the Buddy System, one of the automated risk assessment tools. is analyzed in depth to provide the algorithmic understanding and to promote the development of the risk analysis methodology. The Buddy System mainly uses three main factors of vulnerability, threat and countermeasures as a nucleus of the qualatative analysis with the modified loss expectancy value. These factors are identified and assessed by the separation of duties between the end user and security analyst. The Buddy System uses five axioms as its bases of assessment algorithm and the assessed vulnerability level is strictly within these axioms. Since the In-place countermeasures reduce the vulnerability level up to a certain level. the security analyst may use "what if " model to examine the impact of additional countermeasures by proposing each to reduce the vulnerability level further to within the acceptable range. The emphasis on the qualitative approach on vulnerability leveling is very well balanced with the quantitative analysis that the system performance is prominent.prominent.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.4
• /
• pp.54-59
• /
• 2023

In this paper, we analyze experimental results by applying the PHILS model to a lab-scale superconducting current limiter system for its actual application in medium-voltage direct current (MVDC) systems. Superconducting current limiters exhibit effective current-limiting performance in circuit breaker operations, particularly in limiting large fault currents within a short period, addressing the challenges posed by the increasing use of renewable energy and the integration of DC medium-voltage distribution systems. The development of such superconducting current limiters faces various technical and cost disadvantages, especially when applying a medium-voltage 35kV level system, which is intended for future introduction. The proven lab-scale superconducting current limiter system and the PHILS model are combined and integrated into the actual system. Our plan involves analyzing the limiter's performance, assessing its impact on the system, and preparing for its application in future medium-voltage systems. Utilizing RTDS, a simulation was conducted by connecting actual scaled-down equipment and systems, with the analysis results presented.

• Journal of Information Technology Applications and Management
• /
• v.13 no.2
• /
• pp.99-113
• /
• 2006

It is hardly achieved Electronic Commerce (EC) activation if there isn't any performance in spite of the estimation that EC would improve whole economic efficiency. Therefore, there should be a need for the research whether implementation and utilization of EC really improve companies' business performance. The primary purpose of this study is to investigate the level of EC utilization in Small and medium sized enterprises (SMEs) and analyze its effect on business performance in terms of BSC. The results indicate that EC utilization in various fields of business and the use of information created through EC are significantly related to higher business performance, but EC volume is not. This study examines facing problems of SMEs in utilizing EC as well.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.236-245
• /
• 2011

Many researchers have recently studied multi-level formulation strategies to solve the MDO problems and they basically distributed the coupling compatibilities across all disciplines, while single-level formulations concentrate all the controls at the system-level. In addition, approximation techniques became remedies for computationally expensive analyses and simulations. This paper studies comparisons of the MDO methods with respect to computing performance considering both conventional sequential and modem distributed/parallel processing environments. The comparisons show Individual Disciplinary Feasible (IDF) formulation is the most efficient for sequential processing and IDF with approximation (IDFa) is the most efficient for parallel processing. Results incorporating to popular design examples show this finding. The author suggests design engineers should firstly choose IDF formulation to solve MDO problems because of its simplicity of implementation and not-bad performance. A single drawback of IDF is requiring more memory for local design variables and coupling variables. Adding cheap memories can save engineers valuable time and effort for complicated multi-level formulations and let them free out of no solution headache of Multi-Disciplinary Analysis (MDA) of the Multi-Disciplinary Feasible (MDF) formulation.

• The Korean Journal of Emergency Medical Services
• /
• v.26 no.1
• /
• pp.87-99
• /
• 2022

Purpose: This study aimed to provide basic data for the improvement of the standards related to the performance improvement of the firefighting equipment standards for special ambulances. Methods: Among the domestic firefighting equipment standards, the special ambulance standard was compared with the NFPA 1917 standard for the United States automobile ambulance 2019 and European Union European standard EN 1789 medical vehicle and its equipment, a road ambulance. Results: Anti-skid performance based on indoor noise standards, performance standards for interior lights, seat belt warning device, child car seat fixing device, safety handle, auxiliary footrest, and flooring materials should be supplemented. Conclusion: It is necessary to strengthen the production and performance standards for improvement to a level corresponding to the national standards, such as the United States and European Union.

• Particle and aerosol research
• /
• v.7 no.3
• /
• pp.87-97
• /
• 2011

In this study, we organized the test results obtained from the performance tests for the CA certificated air cleaners which had been commercially available in Korea since 2003, and analyzed the correlation among the test parameters such as flow rate, particle collection efficiency, clean air delivery rate (CADR), ozone emission, odor removal efficiency and noise level etc. The noise level of 267 air cleaners were increased as concentrated at the 45, 50, 55 dB, which are the required noise level for CA certification according to flow rate, and ozone emissions from the CA air cleaners were significantly lower than the requirement limit, 50 ppb for 24 hour operation. The average particle collection efficiency and odor removal efficiency were 89.3 and 80.8%, approximately 20% higher than the requirement of CA certification, regardless of flow rates. The particle removal performance of an air cleaner was clearly discriminated by its CADR, and the CADR was obtained with a simple calculation: 0.79 x flow rate. The low differentiation of gas removal performance of air cleaners by the current CA gas test method was improved by 3.2, 751.3, 13.4 times for ammonia, acetic acid, respectively, by adopting the CADR concept and the real time measurement method, FTIR, for gas removal performance test.

• Journal of Korea Multimedia Society
• /
• v.12 no.12
• /
• pp.1710-1717
• /
• 2009

Flash memory has become the most important storage media in mobile devices along with its attractive features such as low power consumption, small size, light weight, and shock resistance. However, a flash memory can not be written before erased because of its erase-before-write characteristic, which lead to some garbage collection when there is not enough space to use. In this paper, we propose a novel garbage collection scheme, called block-level buffer garbage collection. When it is need to do merge operation during garbage collection, the proposed scheme does not merge the data block and corresponding log block but also search the block-level buffer to find the corresponding block which will be written to flash memory in the next future, and then decide whether merge it in advance or not. Our experimental results show that the proposed technique improves the flash performance up to 4.6% by reducing the unnecessary block erase numbers and page copy numbers.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.122-128
• /
• 2000

Aerodynamic optimization of an automotive air-conditioning blower is a hard task because of the highly complex flow phenomena related to three-dimensional flow separations and the unsteady nature caused by the interaction between primary and secondary air flows throughout the fan. In this paper, an aerodynamic study on a forward-curved centrifugal fan has been carried out Firstly we obtained the fan performance curves versus flow rates showing its unstable nature in the surging operation range. Secondly aerodynamic characterizations were carried out by investigating the velocity and pressure fields in the casing flow passage using a 5-hole pilot probe, at different operating conditions. Surface flow pattern near the cut-off area exhibits similar flow behavior above the best efficiency operating point, although the pressure level increases substantially with the Increase of flow rate. Vorticity in the casing passage flow occurs in all (low rates, downstream from the r-Z plane $\theta$=120 deg., where the position of its core changes with the circumferential location. Although complex, the general flow behavior were common, giving insight in its main aerodynamic features.

• Journal of Internet Computing and Services
• /
• v.13 no.4
• /
• pp.53-62
• /
• 2012

Object segmentation is a demanding research area and not a trivial problem of image processing and computer vision. Tremendous segmentation algorithms were addressed on gray-scale (or biomedical) images that rely on numerous image features as well as their strategies. These works in practice cannot apply to natural color images because of their negative effects to color values due to the use of gray-scale gradient information. In this paper, we proposed a new approach for color object segmentation by modifying a geometric active contour model named distance regularized level set evolution (DRLSE). Its speed function will be designed to exploit as much as possible color gradient information of images. Finally, we provide experiments to show performance of our method with respect to its accuracy and time efficiency using various color images.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2676-2682
• /
• 2024

Despite its remarkable socioeconomic development, South Korea underperforms in terms of female labor force participation and women in leadership positions. As women appear to avoid nuclear engineering, we aim to evaluate its relative performance in attracting women to its labor force compared to other college majors. Using college-major level information from 2000, we test whether the female faculty share in nuclear engineering is lower than its counterparts. Although nuclear engineering has one of the lowest female faculty shares, its share exceeds that of agricultural science, business and economics, chemical engineering, chemistry, civil engineering, and industrial engineering once we properly control for gender composition among students and other compounding factors. In other words, once female students major in nuclear engineering, they are less likely to leave their fields compared to their counterparts in other disciplines. This result implies that if the nuclear engineering field aims to attract more women to its workforce, it is important to target them from the early stage of their careers.