• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.64-64
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.2
• /
• pp.49-55
• /
• 1982

The purpose of this study is to classify the factors influenced on the damages of head works suffered from the storm flood occurred on July 22 1980 in both Musim and Bochong rivers and to find out an integral counter measures against the causes influenced on the disaster of head works in the engineering aspect of planning, design, construction and maintenance. In this survey, number of samples was taken 25 head Works, and the counter measures against the causes of their disasters summarized was as follows, 1. In the aspect of planning a. As the flood water level after the establishment of head works is more increased than the level before setting of head works owing to having more gentle slope of river bed between the head works than nature slope of river bed. Number of head works should be reduced for the appropriate annexation of them b. In the place where head works is established on the curved point of levee, the destruction of levee becomes severe by the strong deflective current. Therefore the setting of head works on the curved point should be kept off as long as possible and in case of unavoidable circumstances the construction method such as reinforced concrete wall or stone wall filed with concrete and anchored bank revetments should be considered. 2. In the aspect of design a. As scoring phenomena at up stream is serious around the weir Where the concentration of strong current is present in such a place, up stream apron having impermeability should be designed to resist and prevent scoring. b. As the length of apron and protected bed is too short to prevent scoring as down stream bed, the design length should be taken somewhat more than the calculated value, but in the case the calculated length becomes too long to be profitable, a device of water cushion should be considered. c. The structure of protected river bed should be improved to make stone mesh bags fixed to apron and to have vinyl mattress laid on river bed together with the improvement for increasing the stability of stone mesh bags and preventing the sucked sand from the river bed. d. As the shortage of cut-off length, especialy in case of the cutoffs conneting both shore sides of river makes the cause of destruction of embankment and weir body, the culculation of cut-off length should be taken enough length based on seepage length. 3. In the aspect of design and constructions a. The overturing destruction of weir by piping action was based on the jet water through cracks at the construction and expansion joints. therefore the expansion joint should be designed and constructed with the insertion of water proof plate and asphalt filling, and the construction joint, with concaved shape structure and steel reinforcement. b. As the wrong design and construction of the weep holes on apron will cause water piping and weir destruction, the design and construction of filter based on the rule of filter should be kept for weep holes. c. The wrong design and construction of bank revetment caused the severe destruction of levee and weir body resulting from scoring and impulse by strong current and formation of water route behind the revetment. Therefore bank revetment should be designod and constructed with stone wall filled with concrete and anchored, or reinforced concrete wall to prevent the formation of water flow route behind the wall and to resist against the scoring and impulse of strong stream. 4. In the aspect of maintenance When the damaged parts occurred at head works the authorities and farmers concerned should find and mend them as soon as possible with mutual cooperation, and on the other hand public citizen should be guided for good use of public property.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.63-72
• /
• 2008

With recent advancement of the medical imaging systems and picture archiving and communication system (PACS), installation of digital radiography has been accelerated over past few years. Moreover, Computed Radiography (CR) which was well established for the foundation of digital x-ray imaging systems at low cost was widely used for clinical applications. This study analyzes imaging characteristics for two systems with different pixel sizes through the Modulation Transfer Function (MTF), Noise Power Spectrum (NPS) and Detective Quantum Efficiency (DQE). In addition, influence of radiation dose to the imaging characteristics was also measured by quantitative assessment. A standard beam quality RQA5 based on an international electro-technical commission (IEC) standard was used to perform the x-ray imaging studies. For the results, the spatial resolution based on MTF at 10% for Agfa CR system with I.P size of $8{\times}10$ inches and $14{\times}17$ inches was measured as 3.9 cycles/mm and 2.8 cycles/mm, respectively. The spatial resolution based on MTF at 10% for Fuji CR system with I.P size of $8{\times}10$ inches and $14{\times}17$ inches was measured as 3.4 cycles/mm and 3.2 cycles/mm, respectively. There was difference in the spatial resolution for $14{\times}17$ inches, although radiation dose does not effect to the MTF. The NPS of the Agfa CR system shows similar results for different pixel size between $100{\mu}m$ for $8{\times}10$ inch I.P and $150{\mu}m$ for $14{\times}17$ inch I.P. For both systems, the results show better NPS for increased radiation dose due to increasing number of photons. DQE of the Agfa CR system for $8{\times}10$ inch I.P and $14{\times}17$ inch I.P resulted in 11% and 8.8% at 1.5 cycles/mm, respectively. Both systems show that the higher level of radiation dose would lead to the worse DQE efficiency. Measuring DQE for multiple factors of imaging characteristics plays very important role in determining efficiency of equipment and reducing radiation dose for the patients. In conclusion, the results of this study could be used as a baseline to optimize imaging systems and their imaging characteristics by measuring MTF, NPS, and DQE for different level of radiation dose.

• Economic and Environmental Geology
• /
• v.42 no.4
• /
• pp.367-376
• /
• 2009

Forty specimens of fossil ophiuroids were collected from two formations of the Cenozoic marine deposits, Duho Formation and Hagjeon Formation, Pohang Basin, Korea. A few specimens were three-dimensionally preserved: most of them were remained flattened and articulated. Although a gross morphology is well preserved in some specimens, the details such as disk shape and plates which is the most important diagnostic features were not observed. Most of the arms are disarticulated, and thus arm vertebra, arm spines and/or arm plates are separately preserved. Only an oral side is recognized in an attached specimens because crossing arms into disk are clearly visible. It is, thus almost impossible to identify Korean ophiuroid fossils as a species level or even a genus level. The fossils were classified into 3 groups by gross morphology of disk and arm, and architecture of vertebra. The most abundant fossils (32 specimens), were found only in the Hagjeon Formation. The majority of specimens are partially disarticulated, having only proximal and median portions of their arms preserved. Arm plates are disarticulated from arm vertebra: most of them show structure of arm vertebra. It has long and well-preserved arm spines, and large tentacle pore. Some specimens (4 specimens) from the Duho Formation is characterized by short and conical arm spines, and well-developed arm plates. Lateral arm plates are small in compared to dorsal and ventral arm plates. The others (4 specimens) is poor in preservation state showing circular oral disk and relatively short sinuous arms. No arm plates are either identified.

• Food Science and Preservation
• /
• v.21 no.5
• /
• pp.676-687
• /
• 2014

This study investigated the quality changes in cabbage brined with deep sea water salt and in a commercial brined cabbage product. The subject cabbages were separated into two groups: those manufactured in the Lab (ML) and the commercial brined cabbage product (CP). Each group had three brining treatments: with sun-dried salt (S, CS), refined salt (R, CR), and deep sea water salt (D, CD). The salinity level of the ML group was 2.1~2.3%, higher than that of the CP group (1.1~1.5%). The total plate count (TPC) was detected as 5.0 log CFU/g with the S, R, and D treatments at Day 7, but the growth rate of the TPC with the CS, CR, and CD treatments was faster than that with the S, R, and D treatments (6.9~7.7 log CFU/g). A lactic acid bacteria (LAB) level of 5.0~6.6 log CFU/g was also detected in the S, R, and D samples, but only 7.0~7.6 log CFU/g was detected in the CP groups at Day 14. The instrumental hardness levels of the cabbage brined with the deep sea water salts (D and CD) were 3,971 g and 3,932.4 g, respectively, which were significantly higher than those of the samples that were salted with sun-dried salt and refined salt (p<0.05). As for the sensory attributes, S, D, and CD maintained their marketability scores until the end of the storage period for all the properties. CD presented the highest total free amino acid (478.9 mg%), glutamic acid (107.0 mg%), citric acid (428 mg%), and sodium (189 ppm) contents.

• The Korean Journal of Mycology
• /
• v.27 no.4 s.91
• /
• pp.283-288
• /
• 1999

The effect of water activity ($a_w,\;0.9{\sim}0.995$) and temperature ($18{\sim}30^{\circ}$C) on in vitro growth and interactions between ochratoxin-producing Aspergillus ochraceus and six other fungi (Alternaria alternata, Aspergillus candidus, A. flavus, A. niger, Eurotium amstelodami, E. rubrum) isolated from maize grain were investigated. A. ochraceus and each six other species were paired and their interactions given a numerical score to obtain an index of dominance ($I_D$) for each species. Generally A. ochraceus was very competitive and dominant against other fungi. It was, however, dominanted by Alternaria alternata and A. niger at high $a_w\;(0.995\;a_w)$, and mutually antagonistic when paired with E. amstelodami and E. rubrum at low $a_w\;(0.9\;a_w)$. The growth rates of each species were also calculated under the same range of environmental conditions. They were markedly influenced by aw and temperature. At high temperature ($30^{\circ}C$), A. ochraceus grew most rapidly under slightly drier conditions ($0.95\;a_w$), while A. alternata, A. flavus and A. niger did at high water availability level ($0.995\;a_w$). At $18^{\circ}C\;and\;25^{\circ}C$, and high $a_w$ level ($0.995\;a_w$), A. alternata grew fastest, while A. candidus, E. amstelodami and E. rubrum grew very slowly. Using Biolog plates the effect of $a_w$ and temperature on utilization patterns of carbon sources in maize was evaluated. The niche overlap index (NOI) relative to A. ochraceus was determined and compared with that of each interacting species. Under high water available condition ($0.995\;a_w$). the NOI of A. ochraceus was often >0.9, indicative of the coexistence with other interacting species. However, against E. amstelodami and E. rubrum at $18^{\circ}C$, the species had NOI <0.8, indicative of occupation of different niches. At low $a_w\;(0.95\;a_w)$, NOI for A. ochraceus was <0.8 when paired with A. alternata and A. niger also suggested the occupation of different niches.

• Korean journal of food and cookery science
• /
• v.19 no.2
• /
• pp.195-209
• /
• 2003

The purpose of this study was to identify the hazard analysis critical control point on food production and transportation flow, applied to home-delivered meals for the elderly. To carry out this study, 1) pan-fried oak mushroom and meat, soy sauce glazed hair tail, and roasted dodok were selected as high nutrient and preferred foods for the elderly and 2) time, temperature, and microbiological quality(standard plate count, coliform, Salmonella spp, Vibrio parahaemolyticus, Staphylococcus spp., Escherichia coli O157:H7, and Listeria monocytogenes) were measured at various phases of the home-delivered meal production and its transportation flows. The results of this experiments are as follows: The temperature measured at cooling phases during the home-delivered meal production flows was 19.2 ∼ 20.0$^{\circ}C$ for the pan- fried oak mushroom and meat and the roasted dodok and was 24.0 ∼ 25.2$^{\circ}C$ for the soy sauce glazed hair tail. These temperature were in the potentially dangerous zone. Microbiological analysis showed that S. spp. was higher in the raw ingredients, including oak mushroom, hair tail, radish, and dodok, than the standard limit. SPC was lower than the standard limit from cooking to transportation phase, but SPC increased significantly during the cooling and packaging phase. The level of coliform detected was far lower than the standard limit and was not detected at all during the transportation phase. Few S. spp. was detected in the pan-fried oak mushroom and meat, but was found in above standards limit during the wrap packaging phase in the soy sauce glazed hair tail and roasted dodok. The level decreased rapidly during the holding and transportation phase. Sal. spp., V. parahaemolyticus, S. spp., E. coli O157:H7, and L. monocytogenes were not detected. For the pan-fried oak mushroom and meat, the critical control points were during the purchasing and receiving of raw ingredients, cooling, and packaging phases. For the soy sauce glazed hair tail and roasted dodok, the critical control points were during the purchasing and receiving of raw ingredients, preparation, cooling, and packaging phases.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.4
• /
• pp.426-436
• /
• 2001

Background : Chronic obstructive pulmonary disease(COPD) is one of the major contributors to morbidity and mortality among the adult population. Cigarette smoking(CS) is undoubtedly the single most important factor in the pathogenesis of COPD. However, its mechanism is unclear. The current hypothesis regarding the pathogenesis of COPD postulates that an imbalance between proteases and antiproteases leads to the destructive changes in the lung parenchyma. This study had two aims. First, to evaluate the effect of CS exposure on histologic changes of the lung parenchyme, and second, to evaluate the effect of CS exposure on the expression of the gelatinolytic enzymes in BAL fluid cells in guinea pigs. Methods : Two groups of five guinea pigs were exposed to the whole smoke of 20 commercial cigarettes per day, 5 hours/day, 5 days/week, for 6weeks, and 12 weeks, respectively, using a smoking apparatus. Five age-matched guinea pigs exposed to room air were used as controls. Five or more sections were microscopically extamined(${\times}400$) and the number of cellular infiltration of the alveolar wall was measured in order to evaluate the effect of CS exposure on the histologic changes of lung parenchyme. The statistical significance was analyzed by a linear regression method. To evaluate the expression of the gelatinolytic enzymes in intraalveolar cells, BAL fluid was obtained and the intraalveolar cells were separated by centrifugation (500 g for 10 min at $4^{\circ}C$). Two sets of culture plates were loaded with $1{\times}10^6$ intraalveolar cells. One plate, contained O.1mM EDTA, a inhibitor of matrix metalloproteases(MMPs), and the other plate had no EDTA. Both plates were incubated for 48 hours at $37^{\circ}C$. After incubation, gelatinolytic protease expression in the supernatants was analyzed by gelatin zymography. Results : At the end of CS exposure, the level of blood carboxy Hb had increased significantly(4.1g/dl in control group, 24g/dl immediately after CS exposure, 18g/dl 30 min after CS exposure, 15g/dl 1 hour after CS exposure). Alveolar inflammatory cells were identified in the CS exposed guinea pigs. The number of alveolar cellular cells observed in a microscopic field ($400{\times}$) was $121.4{\pm}7.2$, $158.0{\pm}20.2$, $196.8{\pm}32.8$, in the control, the 6 weeks, and the 12 weeks group, respectively. The increased extent of inflammatory cellular infiltration of the lung parenchema showed a statistically significant linear relationship with the duration of CS exposure(p=0.001, $r^2=0.675$). Several types of gelatinolytic enzymes in the intraalveolar cells of CS exposed guinea pigs were expressed, of which some were inhibited by EDT A. However, the gelatinolytic enzymes were not expressed in the control groups. Conclusion : CS exposure increases inflammatory cellular infiltration of the alveolar wall and the expression of gelatinolytic proteases in guinea pigs. EDTA inhibits some of the gelatinolytic proteases. These findings suggest a possibility that CS exposure may increase MMP expression in the lungs of guinea pigs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.98-108
• /
• 2009

The purpose of this study is to analyze the characteristics of limited methods, economics and breeding appropriateness of native and imported ground cover plants in the methodology of a shallow soil rooftop garden. The new shallow soil rooftop gardening method uses a total of 13cm in soil thickness, including 4.5cm of top soil on a 7.5cm rock-wool-mat stacked onto a 1cm roll-type-draining plate. The total construction cost for each method of soil level within the design price standard for SEDUM BLOCK is 89,433won/$m^2$, and for DAKU is 92,550won/$m^2$. By comparing those two methods, the construction cost of the shallow soil artificial foundation methodology is 45,000won/$m^2$; this shows the new method is 50% less expensive than the existing method of shallow soil rooftop gardening. The experiment was executed on the rooftop of the Korean National Housing Corporation to ensure validity of the shallow soil artificial foundation planting, and the sample plants which were imported and grown now in native covering. A list investigating the growing plants was made of the cover rate in each plant class, both while alive and the dry plant weight. The native ground cover plants, Sedum kamtschaticum, Sedum middendorffianum, Allium senescens, Sedum sarmentosum, Aquilegia buergariana, and Caryopteris incana increased the cover rate, live weight and dry weight in the shallow soil artificial foundation method. Among the imported cover plants, Sedum sprium and Sedum reflexum, the cover rate increased and growth conditions improved. However, some species needed weed maintenance. After examination with the less expensive shallow soil artificial foundation method and growth analysis, it was found that rooftop gardens are a low-cost option and the growth of plants is great. This result shows the new method can contribute to the proliferation of rooftop gardens in urban settings.