• 통합자연과학논문집
• /
• 제11권1호
• /
• pp.39-43
• /
• 2018

Poly(hydroxyethyl methacrylate)-based hydrogels were surface-functionalized with spiropyran (SP) derivatives to obtain photochromic contact lenses. The contact lens reversibly changes from colorless to purple as response to UV light since colorless ring-closed SP state converts to purple ring-opened merocyanine (MC) state under UV light irradiation. The purple contact lens emits red light at 640 nm. Importantly, the presence of SP segments did not significantly affect the equilibrium water content (EWC) of the lens. SP-functionalized hydrogel lenses may find potential applications in developing light-adaptive ophthalmic materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3316-3318
• /
• 1999

PMMA(poly-methyl methacrylate) microlens array is fabricated using transparent acrylic resin. PMMA is commonly used material for plastic lens due to its excellent visibility larger than 90% and other optical characteristics so much close to those of glass. Orthodontic resin (DENTSPLY International Inc.), commonly used in dentistry, is an transparent acrylic resin kit including MMA liquid and polymerization powder. Their mixture results in PMMA through polymerization. Using the resin PMMA layer is formed on the substrate through spin-coating. Designed pattern of lens structure is transferred to PMMA layer by RIE (Reactive Ion Etching) with oxygen plasma. Final lens shape is formed by thermal treatment that causes PMMA to reflow, The thickness of PMMA spun on the substrate is $17{\mu}m$ that is also final sag of microlens, Designed diameters of the microlenses are $200{\mu}m$, $300{\mu}m$,and $500{\mu}m$, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.572-575
• /
• 2005

A microlens connected to microfluidic channel is fabricated. The microlens is sealed with an elastomeric membrane which deforms by pressure of fluid driven by a syringe pump resulting in the shape change of the microlens. The optical properties of the microlens could be controlled by changing the microlens shape. The microlens system were made of an elastomer, PDMS, using molding from a photoplastic master patterned by UV photolithography. The test results show the optical property of the lens could be made into convex and concave type by applying the fluidic pressure positive and negative.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.33-38
• /
• 2008

As consumer in optics, electronics, aerospace and electronics industry grow, the demand for ultra precision aspherical surface lens increases higher. Precision turning with single-diamond tools has a long history of development for fabrication of optical quality surfaces since the advent of aerostatic rotary spindles and precise linear motion guide ways. To enhance the precision and productivity of ultra precision aspherical surface micro lens, the following specification of ultra precision grinding system is required: the highest rotational speed of the grinder is 100,000rpm and its turning accuracy is $0.1{\mu}m$, positioning accuracy is $0.1{\mu}m$. The development process of the grinding system for the ultra precision aspherical surface micro lens for optoelectronics industry is introduced. In the work reported in this paper, an intelligent grinding system for ultra precision aspherical surface machining was designed by considering the factors affecting the surface roughness and profiles accuracy. An aerostatic form was adopted to build the spindle of the workpiece and the spindle of grinder and ultra precision LM guide way was adopted in this system. And this paper deals with mirror grinding of an aspheric surface micro lens by resin bonded diamond wheel and spherical lens of BK7. It results was that a form accuracy of $0.6{\mu}m$ P-V and a surface roughness of $0.006{\mu}m$ Rmax.

• 한국광학회지
• /
• 제31권2호
• /
• pp.96-104
• /
• 2020

주간 무인 감시를 위하여 가시광 파장 범위인 400~700 nm에서 렌즈와 거울의 기능을 동시에 갖는 구멍 없는 하이브리드 렌즈를 활용한 반사굴절식 전방위 줌 광학계를 설계하고 그 성능을 분석하였다. 하이브리드 렌즈는 렌즈에 구멍을 뚫는 작업이 없고 광학 부품의 수량을 줄일 수 있기 때문에 전방위 줌 광학계의 제작과 조립에서 많은 장점을 갖는다. 이 광학계에서 결상된 도넛 형태의 상에서 안쪽의 압축된 낮은 공간주파수의 상 영역을 확대하여 보기 위해서 줌 렌즈의 기능을 추가한 전방위 광학계의 최적화 설계를 진행하였다. 그 결과 최적화 설계된 광학계의 변조전달함수, 스폿 다이어그램 분석, 공차 분석을 통해 이 광학계의 성능을 분석한 결과로부터 설계 목표 사양을 만족함을 알 수 있었다. 줌 광학계를 주밍할 때 -30~50℃의 온도 변화에 따른 비열화 해석을 한 결과, 적절한 렌즈의 재질을 선정하여 온도 변화에도 상 거리 변화가 거의 없는 광학계임을 확인하였다.

• 전자공학회논문지D
• /
• 제35D권9호
• /
• pp.42-47
• /
• 1998

현재의 전자빔 묘화의 한계를 극복할 수 있는 마이크로 전자빔 시스템의 전자 광학 렌즈를 제작하였고 전자빔 묘화실험을 통하여 이를 검증하였다. 마이크로머시닝기술을 이용하여 실리콘 전극을 제작하고 이를 양극 접합을 통해 조립하여 다층 전극의 전자 광학 렌즈를 제작하였다. 완성된 전자 광학 소자를 초고진공 챔버에 장착하여, STM(Scanning Tunneling Microscope) 팁에서 방출된 전자빔의 focusing 특성을 관찰하였으며 전자를 집속하여 리소그라피를 수행하였다. E-beam 감광막은 PMMA(Poly-methylmethacrylate)를 사용하였고 0.13㎛의 패턴을 형성시킬 수 있었다.

• 한국안광학회지
• /
• 제6권2호
• /
• pp.111-114
• /
• 2001

본 논문은 탄화규소와 탄화티탄으로 보강된 안경렌즈 절삭용 재료에 대한 파괴인성 및 경도에 대한 연구 결과이다. 이 재료는 $1800^{\circ}C$에서 일축 가압소결 하고, $1910^{\circ}C$에서 3시간 열처리하였다. 분당 $15^{\circ}C$씩 온도를 올렸으며, 분당 $25^{\circ}C$씩 온도를 내렸다. 안경렌즈 절삭용 재료의 입자들은 주사전자현미경을 통해 관찰하였고, 각각의 조성은 X선 회절을 통해 관찰하였다. 본 연구에서 연구된 안경렌즈 절삭용 시편의 대표적인 파괴인성과 경도는 각각 $6.1MPa{\cdot}m^{1/2}$과 15.3 GPa이었다.

• 한국안광학회지
• /
• 제10권2호
• /
• pp.127-132
• /
• 2005

칼라콘택트렌즈는 의료용으로 사용되기 시작하여 최근 들어 미용의 목적으로 그 수요가 급격히 증가하고 있는 추세이다. 칼라콘택트렌즈의 제조방법으로는 pigment application method, pigment inlay method, sandwich method, binding method 등이 있는데 현재 국내에서는 binding method가 주로 사용된다. 칼라 콘택트렌즈의 용도와 제조 방법 면에서 채색(tinted)과 착색(cosmetic)으로 크게 분류되는데 채색은 염색방식으로 널리 알려진 방법이며, 착색은 박막공법에 의해 제조된다. 이에 따라 본 해설의 목적은 칼라콘택트렌즈의 제조방법 및 방법에 따른 특성을 비교하고, 칼라콘택트렌즈의 특성을 이해하는데 도움을 주기 위함이다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권11호
• /
• pp.654-659
• /
• 2005

An improved power supply for APD(Avalanche Photo Diode) with a received optical power monitoring circuit allows the received optical power increase temporary without of the degradation of the electrical signal. For the cost reduction and simple fabrication, an improved power supply has been proposed that it was designed for driving a APD as a receiving device of a wireless optical transmission system. It was demonstrated that it was possible to improve a dynamic range by compensating the temperature coefficient of the APD up to 1.0 V/$^{\circ}C$ through the power supply. Also, for an efficient transmission at the receiver end, a simple structure of a single cylindrical micro-lens configuration was used in conjunction with the laser diode to partially compensate a laser beam ellipticity. For this purpose, an astigmatism introduced by the micro-lens is utilized for the additional compensation of the beam ellipticity at the receiver end. In this paper, it is demonstrated that an efficient beam shaping is realized by using the proposed configuration consisting of the single lens attached to the laser diode.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.636-641
• /
• 2014

This paper discusses the fabrication process for a Nipkow disk using micro-lens and pinhole disks. The confocal measuring system that uses the Nipkow disk has the advantage in measuring speed, because the Nipkow disk can simultaneously provide confocal images of all pixels in a CCD camera without requiring a lateral scanning unit. A micro-lens configuration, which focuses illumination on a pinhole, overcomes the low optical efficiency of the Nipkow disk system and allows its use in practical applications. This paper describes how to design the Nipkow disk in terms of numerical aperture, particularly for measuring the height of solder bumps in packaging application and for hybrid processes combining mechanical and semiconductor processes.