• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.517-522
• /
• 2011

Most of SEM is double condenser lens system. Two condenser lenses are required to provide the high demagnification ratios necessary for forming nanometer probes. The thin lens concept provides a highly useful basis for preliminary calculations in a broad range of situations. It is an easy way to understand the electron beam paths in column. Demagnification is easily calculated by this method. In this paper, we present design processes for condenser lens's demagnification by using thin lens combination model. Also, we verify the reliability of our design processes by comparing the modeled demagnification with these of corrected condenser lens.

• Wind and Structures
• /
• 제35권3호
• /
• pp.147-155
• /
• 2022

This research proposes a wind-lens turbine design that can startup and operate at a low wind speed (< 5m/s). The performance of the wind-lens turbine was investigated using CFD and wind tunnel testing. The wind-lens turbine consists of a 3-bladed horizontal axis wind turbine with a diameter of 0.6m and a diffuser-shaped shroud that uses the suction side of the thin airfoil SD2030 as a cross-section profile. The performance of the 3-bladed wind-lens turbine was then compared to the two-bladed rotor configuration while keeping the blade geometry the same. The 3-bladed wind-lens turbine successfully startup at 1m/s and produced a torque of 66% higher than the bare turbine, while the two-bladed wind-lens turbine startup at less than 4m/s and produced a torque of 186 % higher than the two-bladed bare turbine at the design point. Findings testify that adding the wind-lens could improve the bare turbine's performance at low wind speed.

• Current Optics and Photonics
• /
• 제7권3호
• /
• pp.304-309
• /
• 2023

In this study, a binary dielectric annular nanoring lens is proposed to cover the full range of optical phase. The lens is designed numerically, based on the effective-medium theory. The performance of the proposed lens is verified for the cases of single-focal and dual-focal lenses. The efficiency of a single-focal lens is improved by 17.19% compared to a binary dielectric lens, and that of a dual-focal lens shows enhancements of 13.11% and 49.41% at the two focal points. This lens design can be applied to other optical components with axially symmetric structures.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.213-216
• /
• 2005

A novel hyperspectral imaging spectrometer controlling spatial and spectral resolution individually has been proposed. This imaging spectrometer uses a zoom lens as a telescope and a focusing element. It can change the spatial resolution fixing the spectral resolution or the spectral resolution fixing the spatial resolution. Here, we report the concept of the hyperspectral imaging spectrometer with the novel zooming function and the optical design of a zoom lens as the focusing element. By using lens module and third-order aberration theory, we have presented the initial design of four-group zoom lens with external entrance pupil. And the optimized zoom lens with a focal length of 50 to 150 mm is obtained from the initial design by the optical design software. As a result, the designed zoom lens shows satisfactory performances in wavelength range of 450 to 900 nm as a focusing element in an imaging spectrometer. Furthermore, the collimator lens of the imaging spectrometer is designed through the third-order aberration correction by using an iterative process.

• 한국광학회지
• /
• 제32권6호
• /
• pp.259-265
• /
• 2021

최근 렌즈 가공 및 측정 기술의 발전에 따라 렌즈의 제작 조립 기술이 개선되었다. 그럼에도 불구하고 렌즈 제작 조립 기술의 상향에 따른 비용 및 제작 기간의 증가, 온도 및 진동 등의 사용 환경 의존도를 해결하지 못해 이에 따른 불안정해지는 성능 등을 극복하지 못하였다. 또한, 초정밀 광학계에서 효과적으로 민감도를 줄이는 방법은 다수의 보상자를 이용하는 방법인데, 특히 내시경 같은 초소형 렌즈의 경우 렌즈 경통 크기 제약으로 인하여 상거리 보상자 이외 추가적인 보상자 사용에 어려움이 있다. 따라서 렌즈 설계에 있어 공차에 대한 렌즈의 민감도를 최소화하는 것은 무엇보다도 중요한 기술인 바 이를 위한 노력이 필요하며, 렌즈 설계 소프트웨어에서도 민감도를 줄일 수 있는 기능들이 추가되는 추세이다. 본 논문에서는 우선 성능이 최적화된 설계를 도출하고, 이 설계의 민감도를 분석하여 민감도가 높은 요소들을 다중 구성(multi-configuration)에 적용한 뒤 다시 최적화함으로써 렌즈 민감도를 최소화하였으며 사례를 들어 다중 구성 방법이 민감도 저감에 매우 효과적임을 보여주었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1063-1068
• /
• 2008

A lens system of a camera module for mobile phones is comprised of the composition and design of various shapes of lens. To improve responses such as the modular transfer function (MTF), a lens system should always be constructed by considering uncertainty that can be caused by manufacturing and assembly error. In this study, tolerance optimization using the Latin Hypercube Sampling (LHS) technique is performed. In order to reduce the computational burden of the tolerance optimization process and decrease the influence from numerical noise effectively, we use the Progressive Quadratic Response Surface Modeling (PQRSM), which is one of Sequential Approximate Optimization (SAO) techniques. Using this method, we achieved optimal tolerance for each lens and obtained reliability for satisfying user‘s requirements. In addition, through the design process the manufacturing and assembly cost of a lens system was reduced.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.92-98
• /
• 2009

The scanning electron microscope (SEM) contains an electron optical system in which electrons are emitted and moved to form a focused beam, and generates secondary electrons from the specimen surfaces, eventually making an image. The electron optical system usually contains two condenser lenses and an objective lens. The condenser lenses generate a magnetic field that forces the electron beams to form crossovers at desired locations. The objective lens then focuses the electron beams on the specimen. The present study covers the design and analysis of an objective lens for a thermionic SEM. A finite element (FE) analysis for the objective lens is performed to analyze its magnetic characteristics for various lens designs. Relevant beam trajectories are also investigated by tracing the ray path of the electron beams under the magnetic fields inside the objective lens.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.629-637
• /
• 2015

Compact system cameras (CSCs) are commonly used nowadays and feature enhanced video functions and thin yet light interchangeable lenses. They differ from digital single-lens reflex (DSLR) cameras in their lack of mirror boxes. CSCs, however, have autofocus (AF) speeds lower than those of conventional DSLRs, requiring weight reduction of their AF groups. To ensure the marketability of large telephoto zoom lenses with fixed f/2.8 regardless of field angle variation, in particular, light weight AF groups are essential. In this paper, we introduce a paraxial optical design method and present a new, large, telephoto zoom lens with f/2.8 regardless of the field angle variation, plus a lightweight AF group consisting of only one lens. Using the basic paraxial optical design and optimization methods, we fabricated a new and lighter zoom lens system, including a single-lens, lightweight AF group with almost the same performance.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.96-101
• /
• 2020

In this paper, we present the results of our research to perform 3D laser scanning functions by adding a focusing lens to a conventional 2D laser scanner. For the optical design, the ray-tracing technique was used along with a total of four lenses as the variable incident focusing lens, the collimating lens, and the F-Theta lens. As design variables, the curvature of the incident focusing lens (Lens #1) was assumed to be us, l mm and sumed mm, and the incident angles were set at 0cidenus, l. In addition, the distance between the focusing lens and the collimating lens was set to vary from 5 mm to 15 mm. When the incident focal length was varied from 5 mm to 15 mm, the exit focal length was calculated to vary from 67.5 mm to 56.8 mm for the lens with R = 100 mm and from 108.5 mm to 99.0 mm for the lens with R = 150 mm. When the incident angle was 0°, the focal aberration was only slightly observable at 10㎛ in both the x- and y-direction. At 7.5° was the focal aberration of approximately 20~50㎛ was measured at 20㎛. To investigate the chromatic aberration of the designed optical device, the distortion of the focus was observed when the 550 nm beam was simulated on lens designed for a 980 nm wavelength.

• 한국광학회지
• /
• 제9권4호
• /
• pp.251-257
• /
• 1998

등가렌즈 변환을 렌즈군의 변환으로 확장하였으며, 보다 일반화된 변환법을 개발하였다. 새로운 변환법은 두꺼운 렌즈계에서 바로 두꺼운 렌즈계로의 변환이 가능하다. 등가렌즈 변환을 통하여 얇은 렌즈계는 서로 다른 두께를 가지면서도 근축 광학적 특성이 같고 수차특성이 유사한 여러 개의 두꺼운 렌즈계로 변환 될 수 있다. 예로서 telephoto 렌즈계의 설계변경에 등가렌즈 변환을 적용하여 보았으며, 앞부분 렌즈군의 축상두께를 원설계의 75%로 축소하였다. 등가렌즈 변환을 통하여 얻어진 수정설계의 초점거리는 원설계와 동일하였으며, 축상두께만을 변경시킨 경우에 비하여 수차특성의 변화가 적음을 확인할 수 있었다.