• 소성∙가공
• /
• 제16권1호
• /
• pp.25-30
• /
• 2007

The present study covers an integrated simulation method to evaluate optical performance of an aspheric plastic lens by connecting a finite element (FE) analysis of injection molding with a ray tracing simulation. Traditional ray tracing methods have based on the assumption that the optical properties of a lens are homogeneous throughout the entire volume. This assumption is to a certain extent unrealistic for injection-molded plastic lenses because material properties vary at every point due to the injection molding effects. To take into account the effects of the inhomogeneous optical properties of the molded lens, a new.ay tracing scheme is proposed in conjunction with a FE analysis of the injection molding. A numerical scheme is developed to calculate ray paths on every element layer with more realistic information of the refractive indices which can be obtained through the FE analysis. This information is then used to calculate the ray paths based on the FE mesh of which nodal points have unique index values. The proposed tracing scheme is implemented on the tracing of an aspheric lens, and its validity is ascertained through experimental verification.

• 디지털융복합연구
• /
• 제10권11호
• /
• pp.331-335
• /
• 2012

핸드폰에 사용되는 카메라의 발달로 자동초점용 렌즈에 대한 많은 연구가 진행되어 왔다. 다양한 종류의 자동초점용 액추에이터 중에서 VCM(Voice Coil Motor)이 가장 많이 사용되고 있다. 이 VCM은 자석, 코일, 요크 등의 모양에 따라서 구성되는 자계의 흐름을 달리하여 원하는 수준의 자동초점 조절이 가능한 핸드폰용 카메라가 만들어지고 있다. 본 연구에서는 유한요소 해석프로그램인 ANSYS$^{TM}$를 이용하여 산업체에서 사용되는 다양한 구조의 렌즈 중 가장 경제적인 모델을 선택하여 전자기 분석을 수행하였다. 이 전자기 해석을 통하여 효율적인 렌즈 모듈 설계 방법을 제시한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.143-147
• /
• 2003

Despite of outstanding optical performance of glass lens, glass lens have not been widely used because of poor productivity and high cost due to manufacturing process i.e. grinding, polishing. However, press-forming method of glass lens overcomes this disadvantage because of mass production. When glass lens is produced by press-forming method using closed die, it is needed that the volume of glass lens preform precisely measured in order to prevent incomplete products and to increase in life of die. The present paper shows the shortcoming of forming process with closed die, and performs FEM simulation of forming process with open die in order to overcome this shortcoming. The design parameter of open die is selected in standard of assembly with optical module and maintenance of optical performance. FEM simulation is carried out with selected parameter of open die and two basic preform. According to distribution of effective strain in glass lens, optical property of glass lens formed at each set of die and preform is compared.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1199-1200
• /
• 2013

• 소성∙가공
• /
• 제24권6호
• /
• pp.437-442
• /
• 2015

The development of polishing technology has enabled the production of injection molds with high quality surfaces and shapes. For products such as mobile phones which require high quality performance the use of plastic materials has many constraints such as shrinkage and deflection. The purpose of the current research is to use reverse engineering in order to find and analyze the data of a selected aspherical lens and then creating a process to design an improved lens. Additionally, the improved lenses are subject to molding analysis. In order to solve this problem, the lens construction program, Zemax, was used to analyze and optimize performance. In the case of optimization, the object was to eliminate spherical aberration and to find good MTF data. The result of the optimization data was similar to the MTF data found from a random lens. Specific resin and analysis conditions were selected and CAD modeling was done to enhance the injection molding analysis.

• 소성∙가공
• /
• 제18권2호
• /
• pp.128-134
• /
• 2009

The present study covers an integrated simulation method to evaluate optical performance of an aspheric plastic lens by connecting an injection molding analysis with a ray tracing simulation. Traditional ray tracing methods have based on the assumption that the optical properties of a lens are homogeneous throughout the entire volume. This assumption is to a certain extent unrealistic for injection-molded plastic lenses because material properties vary at every point due to the injection molding effects. To take into account the effects of the inhomogeneous optical properties of the molded lens, a numerical scheme is developed to calculate the distribution of refractive index induced from the injection molding process. This index distribution is then reflected onto CODE $V^{(R)}$ simulation and used to calculate ray paths in inhomogeneous media. The proposed tracing scheme is implemented on the tracing of an aspheric lens for a mobile phone camera module.

• 천문학회보
• /
• 제38권2호
• /
• pp.52.1-52.1
• /
• 2013

We present new analyses of FLS 1718+59, a galaxy-galaxy gravitational lens system in the Spitzer First Look Survey (FLS) Field. A background galaxy (z = 0.245) is severely distorted by a nearby elliptical galaxy (z = 0.08), which can be interpreted as a result of gravitational lensing. We analyze this system by multiple methods, including ELLIPSE fitting, gravitational lens modeling, and surface brightness fitting. From this analysis, we obtain parameters of the lens galaxy using varying approaches and compare them. In the future, we will conduct SED fitting for the lens galaxy and estimate the stellar mass, and compare this with the total mass of the lens to check the M-L relation.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2021

In this study, we investigate the injection molding of f-theta lens, an important element of the laser scanning unit of laser printers and scanning systems. The f-theta lens is an aspherical plastic lens that must be molded with a precision of seconds. An injection molding method is often used for mass producing aspherical plastic lenses at a low cost. In the injection molding process, costs related to forming and injection are included. Therefore, in this study, to determine the shrinkage and deformation of injection molded f-theta lens, we predict the pressure and temperature distributions. Further, based on the analysis of the predictions, we maximize the design efficiency and verify the cost and development period reduction.

• 한국안광학회지
• /
• 제15권4호
• /
• pp.355-360
• /
• 2010

목적: 국내에서 시판되는 안경렌즈의 성능을 분석하고 최적화 설계로 수차가 보정된 안경렌즈를 설계하였다. 방법: 굴절률 1.6의 재질을 갖는 4개 회사의 ${\pm}$5.00D의 구면 렌즈와 비구면 렌즈의 중심두께, 곡률반경, 비구면 계수를 측정하였다. Mitutoyo사의 ID-F150으로 중심두께를 측정하였고, Automation Robotics사의 FOCOVISION(SR-2)를 이용하여 곡률반경을 측정하였다. 비구면 계수는 Taylor Hobson사의 PGI 1240S로 측정하였다. 렌즈 후면부터 눈의 회선점까지의 거리 27 mm, 동공직경 4 mm, 중심시야 $30^{\circ}$에서 적은 양의 수차를 갖는 안경렌즈를 설계하였다. 측정 렌즈보다 Axial height를 짧게 함으로써 미용 상의 이점을 높였다. 설계에는 ORA사의 Code V를 이용했다. 결과: -5.00D 비구면 렌즈는 구면 렌즈보다 비점수차와 왜곡수차는 약간 크게 나타났으나 Axial height가 짧고 가장자리 두께가 감소하여 미용 상의 장점이 있다. +5.00D 비구면 렌즈는 왜곡수차의 성능이 향상되고 (-)렌즈와 마찬가지로 Axial height와 중심두께의 감소로 미용 상의 장점을 확인하였다. 최적화 과정을 통한 전면 비구면 렌즈는 비점수차와 왜곡수차가 측정 구면 렌즈보다 좋은 성능과 미용 상의 장점을 확인할 수 있다. 결론: 국내에서 시판되는 비구면 렌즈는 수차의 성능보다는 미용 상의 장점을 키우는 Axial height의 감소와 두께의 감소에 주안점을 둔전면 비구면 설계가 이뤄지고 있다. 최적화 설계이론을 통해 측정렌즈보다 향상된 수차성능과 미용 상의 이점을 모두 갖는 전면 비구면 안경렌즈의 설계를 하였다. 후면 비구면 렌즈의 설계를 통해 전면 비구면 렌즈보다 향상된 성능을 얻을 수 있음을 기대할 수 있다.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.27-34
• /
• 2004

In the injection molding of plastic optical lenses, the molding conditions have critical effects on the quality of the molded lenses. Since there are many molding parameters involved in injection molding process, determination of the molding conditions for lens molding is very important in order to precisely control the surface contours of an optical lens. Therefore this paper presents the application of neural network in suggesting the optimized molding conditions for improving the quality of molded parts based on data of FE Analysis carried out through CAE software, Timon-3D. Suggested model in this paper, which serves to learn from the data of FE Analysis and induce the values for optimized molding conditions. has been implemented for searching the molding conditions without void and with minimized thickness shrinkage at lens center of injection molding optical lens. As the result of this study. we have confirmed that void creation at the inside of lens is primarily determined by mold temperature and thickness shrinkage at center of lens is primarily determined by the parameters such as holding pressure and mold temperature.