• Korean Journal of Plant Taxonomy
• /
• v.38 no.2
• /
• pp.93-109
• /
• 2008

The morphological variation was analysed to examine previous hypotheses on the taxonomy of B. amurensis complex which includes B. amurensis Rupr. var. amurensis, B. amurensis var. quelpaertensis (Nakai) Nakai and B. amurensis var. latifolia Nakai. The results from the univariational and principal components analyses employing 22 putatively diagnostic characters indicate that B. amurensis var. quelpaertensis is distinct from var. amurensis in the length and width of leaves, angle of leaf apex, distance between spinose teeth, length of internode, number of flowers per inflorescence, whereas B. amurensis var. latifolia is different from other varieties in the angle of leaf apex and leaf length/width ratio. In principal component analysis, the characters of the leaf including leaf width and length were the main characteristics to distinguish those three taxa. The evidence both from the principal components analyses and current geographical distribution pattern suggest that retaining the varietal status for the two taxa, B. amurensis var. latifolia and B. amurensis var. quelpaertensis is reasonable.

• Ocean and Polar Research
• /
• v.32 no.3
• /
• pp.247-254
• /
• 2010

Single cell PCR analysis and light and scanning electron microscopic techniques were utilized to identify free living bivalve larvae in the coastal waters of Tae-an, on the west coast of Korea. Through DNA sequencing, venerid clam larvae were isolated and identified as Ruditapes philippinarum (99% similarity) and Meretrix lusoria (99%). Under microscopic observation, the D-veliger stage of R. philippinarum exhibited symmetrical shoulder angles and an elliptical ventral form. In contrast, M. lusoria displayed asymmetrical shoulder angles and a round ventral form in the umbonal stage. Size of the R. philippinarum larvae was $156{\pm}22{\mu}m$ in length, $126{\pm}12{\mu}m$ in height, $92{\pm}14{\mu}m$ in width with a length: height ratio of 1.23. Meretrix lusoria was $202{\pm}44{\mu}m$ in length, $161{\pm}35{\mu}m$ in height, $96{\pm}38{\mu}m$ in width with a length: height ratio of 1.25. Experimental results indicate that morphological and molecular characteristics provide evidence for the larval identification of these two venerid clam larvae species in nature.

• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.314-319
• /
• 2000

Back-face strain compliance (BFS compliance) for the four-point bend specimen has been calibrated for various crack length ratios. Finite element technique was employed to simulate four-point loading and calculate back-face strain of the bend specimen. The numerically determined strain variation along the back face indicates that the sensitivity to gage placement increases with crack length and back-face strain at the gage length less than O.2W, where W is the width of the bend specimen, can be measured within 5% deviation of the maximum BFS. Non-dimensional back-face strain compliance, -E'BCW, was calibrated with FE analysis and experiment. The experimentally determined compliance indicates good agreement with the numerical compliance and can be expressed as a function of crack length ratio.

• Journal of Environmental Science International
• /
• v.30 no.9
• /
• pp.709-717
• /
• 2021

This study evaluated the growth, physiological responses and productivity based on the intercropping ratio of cherry tomato (Lycopersicon esculentum L.) with basil (Ocimum basilicum L.). on the rooftops to determine out the efficient ratio in urban agriculture. From April to September 2019, an experiment was conducted on the rooftop of Konkuk University Glocal Campus. Cherry tomato and basil were selected as companion plants for eco-friendly urban agriculture on the rooftops. Each plot was created with a width of 100 cm, length of 100 cm, and height of 25 cm. After installing drainage and waterproof layers from bottom to top, substrate was laid out with a height of 20 cm. Intercropping ratio was consisted of a single tomato plant (TC), 2:1 tomato to basil (T₂B₁), 1:1 tomato to basil (T₁B₁), 1:2 tomato to basil 2 (T₁B₂), and a single basil plant (BC), were conducted using a randomized complete plot design with five treatments and three replication (a total 15 plots). Measurements were divided into growth, physiological responses, and productivity parameters, and detailed items were investigated and analyzed by classifying them into plant height, leaf length, leaf width, number of leaves, root length, root collar caliper, chlorophyll contents, fresh weight, dry weight, number of fruit, fruit caliper, fruit weight, and sugar content. Comparative analyses of cherry tomato with basil plants by intercropping ratio, growth, physiological, and productivity responses are determined to be efficient when the ratio of cherry tomato to basil ratio is 2:1 or 1:1.

• The Korean Journal of Mycology
• /
• v.20 no.4
• /
• pp.309-314
• /
• 1992

Nine species of powdery mildew fungi were examined to understand the change in size of conidia in relation to air temperature. Of these, Sphaerotheca aphanis, S. fusca and S. pannosa showed constant value of conidial sizes regardless of changes in air temperature. The length/width ratio in the conidia of Erysiphe, artemisiae and E. sordida increased as the air temperature rose. E. cichoracearum gave the result against that shown in the above two species of Erysiphe. The conidia of Microsphaera pseudolonicerae became decreased in their width as the air temperature fell. The length/width ratio of conidia was markedly increased. M. alphitoides and M. robiniae showed variable size measurements in conidia regardless of changes in air temperature and studies for it needed for additional examination in future.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.302-310
• /
• 2008

This paper puts forward an advanced consideration on the design of scaled multiple-gate FET (MuGFET); the aspect ratio ($R_{h/w}$) of the fin height (h) to fin width (w) of MuGFET is considered with the aid of 3-D device simulations. Since any change in the aspect ratio must consider the trade-off between drivability and short-channel effects, it is shown that optimization of the aspect ratio is essential in designing MuGFET's. It is clearly seen that the triple-gate (TG) FET is superior to the conventional FinFET from the viewpoints of drivability and short-channel effects as was to be expected. It can be concluded that the guideline of w < L/3, where L is the channel length, is essential to suppress the short-channel effects of TG-FET.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.375-388
• /
• 2019

This paper aims to investigate the axial load behavior and stability strength of square tubed steel-reinforced concrete (TSRC) columns. Unlike concrete filled steel tubular (CFST) column, the outer steel tube of a TSRC column is mainly used to provide confinement to the core concrete. Ten specimens were tested under axial compression, and the main test variables included length-to-width ratio (L/B) of the specimens, width-to-thickness ratio (B/t) of the steel tubes, and with or without stud shear connectors on the steel sections. The failure mode, ultimate strength and load-tube stress response of each specimen were summarized and analyzed. The test results indicated that the axial load carried by square tube due to friction and bond of the interface increased with the increase of L/B ratio, while the confinement effect of tube was just the opposite. Parametric studies were performed through ABAQUS based on the test results, and the feasibility of current design codes has also been examined. Finally, a method for calculating the ultimate strength of this composite column was proposed, in which the slenderness effect on the tube confinement was considered.

• Archives of Plastic Surgery
• /
• v.44 no.5
• /
• pp.400-406
• /
• 2017

Background The purpose of this study was to evaluate changes in nasal growth after the implementation of a preoperative nasal retainer in patients with bilateral incomplete cleft lip. Methods Twenty-six infants with bilateral incomplete cleft lip and cleft palate were included in the study. A preoperative nasal retainer was applied in 5 patients from the time of birth to 2.6-3.5 months before primary cheiloplasty. Twenty-one patients who were treated without a preoperative nasal retainer were placed in the control group. Standard frontal, basal, and lateral view photographs were taken 3 weeks before cheiloplasty, immediately after cheiloplasty, and at the 1- and 3-year postoperative follow-up visits. The columella and nasal growth ratio and nasolabial angle were indirectly measured using photographic anthropometry. Results The ratio of columella length to nasal tip protrusion significantly increased after the implementation of a preoperative nasal retainer compared to the control group for up to 3 years postoperatively (P<0.01 for all time points). The ratios of nasal width to facial width, nasal width to intercanthal distance, columellar width to nasal width, and the nasolabial angle, for the two groups were not significantly different at any time point. Conclusions Implementation of a preoperative nasal retainer provided significant advantages for achieving columellar elongation for up to 3 years postoperatively. It is a simple, reasonable option for correcting nostril shape, preventing deformities, and guiding development of facial structures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.142-146
• /
• 2003

To obtain information on the inheritance of grain weight and grain size of japonica cultivar, Sobibyeo which has high yielding potential and large grain in rice, the genetic variation, heritability and phenotypic correlation of 1,000 grain weight, grain length, width and thickness were investigated in two crosses, Iksan 429/Sobibyeo and Iksan 430/Sobibyeo. The gram characteristics of $\textrm{F}_1$ hybrids exceeded mid-parental values, while grain length: width ratio was intermediate between the parents. In $\textrm{F}_2$ populations, the average grain length, width and thickness were intermediate as mid-parental values, but grain weight exceeded the mid-parental values. In $\textrm{F}_2$ populations of Iksan 429/Sobibyeo and Iksan 430/Sobibyeo, mean 1,000 grain weights were 24.86g and 25.04 g on the average, and ranged 18.4g-32.2g and 19.5g-33.4g, respectively. The segregation mode for grain weight was regarded as a nearly normal distribution in two crosses of $\textrm{F}_2$ populations. Estimates of broad sense heritabilities for grain weight in Iksan 429/Sobibyeo and Iksan 430/Sobibyeo were high as 89.00% and 89.06%, and grain length showed the highest heritability among grain characteristics as 97.45% and 97.35%, respectively. Grain weight was highly correlated with grain length, width and thickness, and grain length was highly correlated with grain width and thickness. These grain characteristics were apparently controlled by polygenes. Accordingly, these traits will be readily improved through selection in the early segregating generations.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.50-57
• /
• 2014

In this study, we investigated the physical properties of kraft pulps made from rice husk, peanut husk and garlic stems. These agricultural byproducts were collected individually, and then various pulps were manufactured from them by controlling active alkali, sulfidity, reaction time and the liquor ratio in the kraft pulping process in order to analyze the applicability of these agricultural byproducts as raw materials for kraft pulps. After kraft pulping, we measured yield, flake content, fiber length, fiber width and freeness of pulps, and the fiber shapes of the pulps were observed by using an optical microscope. When the higher active alkali, longer reaction time and lower liquor ratio were applied in kraft pulping process, reject content decreased and fiber yield increased. The pulp from garlic stems had the longest fiber length and that from rice husk showed the highest intial freeness. All of the pulps from agricultural byproducts showed higher initial freeness, shorter fiber length and the similar fiber width compared to OCC, BCTMP and hardwood BKP. The fibers of the pulps made from agricultural byproducts showed a similar shape to those of commercial pulps. It was concluded that these agricultural byproducts had a potential as raw materials to produce an alternative pulp to the commercial pulps.