• 제목/요약/키워드: Length of stress path

검색결과 33건 처리시간 0.022초

과압밀점토의 응력이력 의존성에 관한 연구 (The Effects of Stress History on the Behaviour of Overconsolidated Clay)

  • 김병일;신현영;김용수;김수삼
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.161-166
    • /
    • 2001
  • Overconsolidated clays have a different stress history according to the deposit environment. The stress history is classified into (i) rotation angle of stress path, (ii) overconsolidation ratio, and (iii) magnitude of length of recent stress path. Stress-strain behaviour of overconsolidated clays strongly depends on these stress history. In this study a series of drained stress path tests were carried out. Test results indicated that stress-strain behaviour of overconsolidated clay(focused on strain rate) depends on OCR and length of recent stress path, especially rotation angle.

  • PDF

응력이력과 시간이력에 따른 과압밀점토의 응력-변형-변형률 속도 (Stress-Strain-Strain Rate of Overconsolidated Clay Dependent on Stress and Time History)

  • 한상재;김수삼;김병일
    • 한국지반공학회논문집
    • /
    • 제19권1호
    • /
    • pp.143-150
    • /
    • 2003
  • 과압밀점토의 응력-변형 거동에 중요한 영향을 미치는 변형률 속도에 관하여 다루었다. 본 연구에서는 응력경로 회전각, 과압밀비 그리고 접근길이를 포함한 응력이력과 재하속도 이력 및 재하속도를 포함한 시간이력을 변화시켜 압밀-배수 응력경로 삼축 실험을 수행하였다. 실험 결과 모든 영향인자에 대하여 시간이 증가할수록 변형률 속도 역시 증가하였다. 또한, 회전각의 정의에 따라 상이한 변형률 속도의 값을 보였고, 과압밀비와 재하속도가 증가할수록 변형률 속도 역시 증가하였다. 응력이력에서는 응력-변형 거동과 변형률 속도간의 상관성이 존재하였지만 시간이력에서는 응력-변형-변형률 속도의 상관성을 보이지 않았다.

과압밀점토의 간극수압계수에 응력이력과 시간이력이 미치는 영향 (The Effects of Stress and Time History on Pore Pressure Parameter of Overconsoldated clay)

  • 김수삼;김병일;한상재;신현영
    • 한국해안해양공학회지
    • /
    • 제14권4호
    • /
    • pp.286-294
    • /
    • 2002
  • 본 연구에서는 응력이력과 시간이력이 과압밀 상태에서의 간극수압계수, A(Skempton, 1954)에 미치는 영향에 관하여 실험적으로 규명하였다. 응력경로 회전각, 과압밀비 및 접근길이로 정의되는 응력이력과 재하속도 이력 그리고 정지기간으로 정의되는 시간이력에 따른 간극수압계수(A)의 값과 변화 양상을 보았다. 응력경로 회전각에 따른 간극수압계수(A)는 그 값과 변화 경향에서 상이하게 나타났고, A의 값에 있어서는 과압밀비 의존성을 보였지만, 변화 양상에서는 의존성을 찾아 볼 수 없었다. 접근길이에 따른 간극수압계수(A)는 초기 미소 변형률 구간을 제외하고는 큰 영향을 받지 않았다. 또한, A의 값은 재하속도 이력에 영향을 받았지만, 변화 경향은 모두 동일하게 나타났다. 마지막으로 정지기간에 따른 과압밀점토의 간극수압계수, A는 정지기간의 유무에 따라 변화 경향과 값이 큰 차이를 보이다가 일정 축차응력 또는 변형률을 넘어서면 거의 유사한 값을 나타내었다.

베트남 외국인 근로자의 직무 스트레스 영향요인 경로분석 (Validation of a Path Model of Vietnamese Migrant Workers' Occupational Stress)

  • 전혜정;이가언;유정옥
    • 지역사회간호학회지
    • /
    • 제29권4호
    • /
    • pp.404-413
    • /
    • 2018
  • Purpose: The purpose of this study is to construct and verify a path model for the influencing factors on occupational stress of Vietnamese migrant workers in Korea. Methods: Participants were 193 Vietnamese migrant workers recruited from Foreign Workers Support Centers. Data were collected by a self-administered survey with copies of a Questionnaire written in Vietnamese. Data were analyzed with descriptive statistics, Pearson's correlation coefficients and path analysis using SPSS/WIN 23.0 and Amos 20.0 program. Results: Length of residence, homeland friends' and Korean colleagues'supports, and acculturation have been found to have significant direct effects on occupational stress of Vietnamese migrant workers. Meanwhile, Length of residence, homeland friends', Korean colleagues', and their families' supports showed indirect effects on their occupational stress. What had the greatest direct effect on occupational stress of Vietnamese migrant workers was Korean colleagues' support. Conclusion: For reducing occupational stress of Vietnamese migrant workers, it is necessary to strengthen their Korean colleagues' supports in work places. In addition, community organizations should take strategies to enhance homeland friends' supports and to improve acculturation of Vietnamese migrant workers.

우리나라 국민학생의 스트레스에 관한 연구 (A Study on Stress of Primary Students in Korea)

  • 김무채;김정근;김지주
    • 한국학교보건학회지
    • /
    • 제6권1호
    • /
    • pp.78-92
    • /
    • 1993
  • The purpose of this study is to find out the stress causes of the primary students in Korea, through the three major methods, life event score, multiple regression about stress causes and G.H.Q. path-diagram. A survey was made of 889 students who were selected among students of six primary schools in seoul and Ka-pyeng, from Sep. 28 to Oct. 2. 1992. The results of this study are summarized as follows : 1. Life event score Among the children's life events, (deaths of family) (degrade of school record) (the increase of absence days) (divorce of parents) (trouble with relationship) are high ranking in life event score. Besides, (scolded by teacher and parents) (beginning of extracurricular work) are spread stress causes. In conclusion, these stress causes are shown by two aspects, home, school, and so children are under stress circumstance in both places. These stress causes vary with area and sex. 2. Multiple regression about stress causes and G.H.Q. This study analysed how a stress caused by home life affects the children's health of mind and body. The most influential factors are , and these factors vary with area and sex. 3. Path-diagram This study proved that socio-psychological school environment raises children to secede from school, and this secession that operates as a stress cause affects children's health of mind and body. This serial process is analysed by path analysis, and made out a path-diagram. In conclusion, as expected socio-psychological,school environment affects the children's health of mind and body. This is shown by two aspects : positive, negative. This stress causes vary with area and sex.

  • PDF

모형실험을 통한 고정 및 이동하중 재하 방법에 따른 노반 변형거동 비교 (A Comparative of Ground Stress with Difference of the Fixed Point Loading and Moving Wheel Loading)

  • 최찬용;신은철;엄기영;신민호
    • 한국철도학회논문집
    • /
    • 제14권1호
    • /
    • pp.49-56
    • /
    • 2011
  • 이 논문에서는 모형토조 실험으로 하중을 재하하는 방법에 따라 응력과 침하특성을 비교하였으며, 하중재하 방법의 차이를 정량적으로 평가하기 위하여 응력경로와 주응력 방향의 회전영향을 평가하였다. 실험결과 동일 시험조건에서 하중재하 방법에 따라 침하량과 토압이 달라지며, 이동하중의 경우 고정된 지점에서의 정적하중보다 침하량이 약 6배, 반복하중보다 약 2배 이상 크게 발생하였다. 응력경로에서도 고정된 지점에서의 반복하중보다 응력경로의 길이(L)는 2배 이상이 길고 전단변형에 영향을 주는 축차응력도 약 2배 이상 크게 나타났다. 또한, 도상자갈이 있는 궤도에서의 이동하중의 경우 주응력 방향의 회전각이 약 ${\Delta}{\theta}=40^{\circ}$ 최대 응력의 약 60%정도 발생하고 있으며, 주응력 방향의 회전에 영향을 받고 있다는 것을 알 수 있었다.

The calculation of stress intensity factors by the surface integral method

  • Jin, Chi-Sub;Jang, Heui-Suk;Choi, Hyun-Tae
    • Structural Engineering and Mechanics
    • /
    • 제3권6호
    • /
    • pp.541-553
    • /
    • 1995
  • The determination of the stress intensity factors is investigated by using the surface integral defined around the crack tip of the structure. In this work, the integral method is derived naturally from the standard path integral J. But the use of the surface integral is also extended to the case where body forces act. Computer program for obtaining the stress intensity factors $K_I$ and $K_{II}$ is developed, which prepares input variables from the result of the conventional finite element analysis. This paper provides a parabolic smooth curve function. By the use of the function and conventional element meshes in which the aspect ratio (element length at the crack tip/crack length) is about 25 percent, relatively accurate $K_I$ and K_{II}$ values can be obtained for the outer integral radius ranging from 1/3 to 1 of the crack length and for inner one zero.

반도체 패키지의 층간박리 파괴역학인자 해석 및 균열진전경로 예측 (Analyses of Fracture Parameters and Prediction of Crack Propagation Path on Delamination in the LSI Package)

  • 정남용;박철희
    • 한국생산제조학회지
    • /
    • 제18권4호
    • /
    • pp.401-409
    • /
    • 2009
  • This paper presents a method of calculating the stress intensity factor (K) and crack propagation direction (${\theta}_0$) at the crack-tip that is associated with delamination in the large scale integration(LSI) package. To establish a reasonable strength evaluation method and life prediction, it is necessary to assess fracture parameters under various fracture conditions. Therefore, we conducted quantitative stress singularity analysis considering thermal stress simulating the changes of crack length (a), (h) and (v) in delamination using the 2-dimensional elastic boundary element method (BEM), and from these results predicted crack propagation direction and path.

  • PDF

반복-수평력을 받는 프리캐스트기둥- RC기초 Anchor 접합부의 내력 실험 연구 (Strength Experimental Study on Precast Column-R.C. Foundation Anchor Joint Subjected to Cyclic Horizontal Loading)

  • 이호;정환목;차병기;변상민
    • 한국공간구조학회논문집
    • /
    • 제9권2호
    • /
    • pp.45-52
    • /
    • 2009
  • 이 논문은 반복-수평력을 받는 프리캐스트 기둥-RC 기초 Anchor 접합부의 반복-수평력에 대한 내력 특성을 규명하기 위함이다. 본 연구는 하부 기초에 프리캐스트 콘크리트 기둥과 기초를 Anchor식으로 접합한 콘크리트 구조체가 정확한 응력전달 경로 및 파괴 메커니즘에 있어서 기존의 콘크리트-강재 연결부와 어떠한 차이가 있는지 제시한다. 반복-수평력 작용하의 철근의 인발력 실험결과는 프리캐스트 기둥-RC 기초 Anchor 시공에 필요한 철근의 최소 필요 삽입 깊이를 제시한다. 또한, 실험을 통해 제시된 응력 전달 경로 및 파괴 메커니즘을 제품별 메뉴얼에 제시되어 있는 메커니즘과 비교, 검토함으로서 접합부의 명확한 응력전달 경로 및 파괴 메커니즘을 시공자의 요구 성능에 맞게 제시한다. 그러므로 본 연구를 통해 프리캐스트 콘크리트 기둥의 정확한 주근의 개수, 공칭직경, 정착 길이 등에 대한 최적의 설계 조건을 제시함으로써, 시공 시 이들에 대한 정확한 데이터를 제공한다.

  • PDF

경계요소법(境界要素法)에 의한 균열 진전경로(進展經路)의 예측 (A Prediction of Crack Growth Path by Boundary Element Method)

  • 김상철;임원균
    • 대한조선학회지
    • /
    • 제25권4호
    • /
    • pp.39-46
    • /
    • 1988
  • The purpose of this paper is to apply the boundary element method to predict the crack growth path. The quarter point element with traction singularity at the crack tip is applied to compact tension type specimens and two inclined slit problems under compression load. The maximum stress criterion which was originally derived for the crack initiation is extended to the analysis of the crack propagation. The predicted crack paths with 1/4 crack growth increment of initial crack length agree quite well with experimental results. It is found that the computed crack path of the boundary element analysis is not mainly affected by the crack increment length.

  • PDF