• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.6
• /
• pp.413-420
• /
• 2001

To prevent salt accumulation in cut-flower rose soil through proper nutrient management, the optimum concentration of nitrogen and potassium for fertigation was investigated. For the purpose, 'Noblesse' cut-flower roses was transplanted to a sandy loam soil in a plastic house and four nutrient levels (0, 25, 50 and $100mg\;l^{-1}$) of N and K separately were applied by drip-irrigation under -20 kPa of soil moisture tension. The growth and yield responses were assessed in terms of the length, weight and number of cut-flower roses, and the nutrient availability absorbed by plant. The length of cut-flowers was not affected by N concentration, but the weight and number of cut-flowers were greatest at $50mg\;N\;l^{-1}$. For K, the length and weight of cut-flowers were greatest at 25 and $50mg\;l^{-1}$, but the number of cut-flowers were remarkably great at $50mg\;l^{-1}$. Despite of increase of N and K fertigation concentration ranged from 25 to $100mg\;l^{-1}$, there was not significant difference between the uptake concentration of plant parts. As a result, the availability of N and K in $50mg\;l^{-1}$ fertigation was highest when compared to other fertigation concentrations, while the remaining amounts of N and K to soil was very low. The results of this study suggested that N and K concentrations of $50mg\;l^{-1}$ would be adequate for the fertigation of 'Noblesse' cut-flower rose.

• Advances in nano research
• /
• v.7 no.6
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• Imaging Science in Dentistry
• /
• v.50 no.4
• /
• pp.319-322
• /
• 2020

Purpose: The purpose of this study was to investigate the utility of the width-to-length ratio for the differentiation of ameloblastomas and odontogenic keratocysts in the body of the mandible. Materials and Methods: This study retrospectively reviewed 9 patients with ameloblastomas and 9 patients with odontogenic keratocysts using cone-beam computed tomography. The width-to-length ratio was determined by measuring the ratio between the greatest buccolingual dimension and the greatest perpendicular anteroposterior dimension of the lesion on the axial view. One-way analysis of variance was used to examine the difference in the width-to-length ratio between the 2 types of lesions. Statistical significance was tested at P<0.05. Results: Ameloblastomas showed a mean width-to-length ratio of 0.64, whereas odontogenic keratocysts showed a mean width-to-length ratio of 0.41. The cut-off value with which the 2 types of lesions were differentiated was 0.5. The width-to-length ratios of ameloblastomas were significantly higher than those of odontogenic keratocysts (P<0.05). Conclusion: The width-to-length ratio might be used to differentiate between ameloblastomas and odontogenic keratocysts.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.57-64
• /
• 2008

In general, the entire of paper mulberry bark, which is not cut into pieces with an appropriate length, have been used in the pulping. This kind of pulping method couldn't accomplish the improvement of beating and sheet forming efficiency. For this reason, we investigated the effects of the cutting length of paper mulberry bast fiber on pulping and Hanji (Korean traditional paper) properties, in order to develop high quality Hanji manufacturing process. The cutting length variation of paper mulberry white bast did not great effects on pulp yields. The pulp yields based on pulping methods were sulfomethylated pulping av. 57.4%, alkali-hydrogen peroxide pulping av. 55.4%, and alkaline pulping av. 53.5% respectively. The optical properties such as brightness, opacity, scattering coefficient, and absorption coefficient were slightly improved by the increase of paper mulberry white bast cutting length. The increase of paper mulberry white bast cutting length resulted in poor sheet formation. Physical properties such as breaking length, TEA, tear index, burst index, and folding endurance were slightly improved by the increase of cutting length. The modified pulping processes, which used sulfomethylated method and alkali-hydrogen peroxide method, showed better pulp and sheet properties than conventional alkaline pulping.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.564-567
• /
• 2001

This experiment investigated the dwarfing effect of daminozide and chlormequat to produce high quality of spray chrysanthemum. Long neck of cut-chrysanthemum break easily. Peduncle length of the cultivar 'Biarittz' and 'Vyking' were retarded by the foliar spray treatment of $1500mg{\cdot}L^{-1}$ daminozide. Daminozide application did not affect plant growth of 'Biarittz' and 'Vyking'. However, the number of days to flowering was delayed by 3 days by daminozide application of 'Biarittz'. Length of cut flowers of 'Vyking' was decreased by the application of daminozide, while chlormequat did not affect dwarfing of peduncle length in spray chrysanthemum.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.87-92
• /
• 1987

Crease cut pearled baller was studied in relation to product and quality, and processing electricity requirement with various pearling yields. 1. Increasing the pearling rate resulted in increasing broken grain of cut-Polished barley. 2. The range of length/width ratio in cut-polished baller were from 2.09 to 2.13 and those of pearled barley were 1.36, respectively. 3. Cut-polished barley required more electricity than pearled barley at the same polishing rate. As pearling rate increased at first polishing before cutting, total electricity requirement of cut-polished barley reduced significantly.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.46-49
• /
• 2005

Recently, many research results have been reported about nano-tip using carbon nanotube because of its better sensing ability compared to a conventional silicon tip. However, it is very difficult to identify the carbon nanotube having proper length for nano-tip and to attach it on a conventional tip. In this paper, a new method is proposed to make a nano-tip and to control its length. The electrochemical etching method was used to control the length by cutting the carbon nanotube of arbitrary length and it was possible to monitor the process through current measurement. The etched volume of carbon nanotube was determined by the amount of applied charge. The carbon nanotube was successfully cut and could be used in the nanogripper.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.5
• /
• pp.123-130
• /
• 2008

In order to clarify detailed mechanism of the flexible disk grinding system, workpiece length was introduced and its performance was evaluated. Flat zone ratio increased as the workpiece length increased. Increasing wheel speed and depth of cut also enhanced process performance by producing larger flat zone ratio. Neural network system was successfully applied to predict minimum depth of engagement and flat zone ratio. An additional input parameter as workpiece length to the neural network system enhanced the prediction performance by reducing error rate. By rearranging the Input combinations to the network, the workpiece length was precisely predicted with the prediction error rate lower than 2.8% depending on the network structure.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.270-277
• /
• 2021

Veronica rotunda var. subintegra (Nakai) T. Yamaz. is perennial herb belonging to the family Scrophulariaceae, native to Korea. Plant growth regulators, cutting mediums, cutting position, and leaf size were examined to investigate the requirements for cutting propagation of V. rotunda var. subintegra. This study was conducted over a period of 6 weeks from March to May 2017 in the Division of Plant Resources, Korea National Arboretum. For all treatments, survival and rooting percentage was 100%. In PGRs experiment, the number of roots and shoot length treated with 100 mg/L IBA treatment was significantly higher than that of NAA treatment. The shooting percentage was decreased with an increase of the PGRs concentration. In growing substrates experiment, the number of roots on commercial soil (61.2) was the highest, followed commercial + kanuma soil (45.7), and the lowest was kanuma soil (41.8). The shoot length treated with commercial soil (8.9 cm) was significantly greater than that of kanuma soil (4.1 cm). In cutting positions experiment, the number of roots treated with apical (56.6) was significantly higher than that of basal (38.8). In leaf-cut experiment, the number of roots and of shoot length treated with full leaf was significantly higher than that of half leaf. As a result, we recommend treating cuttings with 100 mg/L IBA treatment, commercial soil, apical position, and full leaf for successful cutting propagation of V. rotunda var. subintegra.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.256-260
• /
• 2010

This study was carried out to investigate effects of stock plant management and foliar spray of GA on the flower quality in hydroponically grown chrysanthemum 'Shinma'. In the growth and development as affected by stock plant management, cut flower length, petal number and cut flower weight were the best in the plot of long day and chilling treatment showed 114 cm, 298 and 102 g, respectively. Chlorophyll content(SPAD-value) was the highest in the plot of foliar spray of diluted Molbia(1 : 500). Flower quality according to concentration and spray time of gibberellin showed a different pattern. Cut flower length was the longest in the plot of solution diluted to 1 : 1,000 spraying before flowering at 60 days, petal number was the most in 1 : 500 at 60 days, and cut flower weight was the heaviest in 1 : 2,000 at 60 days, respectively. However, peduncle length was tended to be elongated with foliar spray of gibberellin solution diluted to 1 : 500 or 1 : 1,000 before flowering at 45 days.