• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.3-11
• /
• 2017

Research and development are being conducted to apply low-power Bluetooth (BLE) technology to IoT (Internet of Things) applications. The characteristic of this application environment is that many piconets can operate in the same space. Therefore, interference between homogeneous networks is likely to occur. In the BLE data channel, adaptive frequency hopping (AFH) scheme is used among the 37 frequency channels, and the master and the slave communicate while changing the carrier frequency. If there are multiple BLE piconets in the same space, there is a risk of frequency collision and packet errors will occur. In this paper, we analyze the packet collision probability due to cochannel interference in multiple asynchronous BLE piconet environments. Specifically, we analyzed packet collision probability according to the number of concurrently operating BLE piconets with the ratio of connection interval to connection event length as the main parameters. The analysis result can be used to set connection event related parameters for a desired packet collision probability according to the number of users having BLE devices in a given space.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.506-508
• /
• 2005

In general, organic TFTs are comprised of four components: gate electrode, gate dielectric, organic active semiconductor layer, and source and drain contacts. The TFT current, in turn, is typically determined by channel length and width, carrier field effect mobility, gate dielectric thickness and permittivity, contact resistance, and biasing conditions. More recently, a number of techniques and processes have been introduced to the fabrication of OTFT circuits and displays that aim specifically at reduced fabrication cost. These include microcontact printing for the patterning of metals and dielectrics, the use of photochemically patterned insulating and conducting films, and inkjet printing for the selective deposition of contacts and interconnect pattern. In the fabrication of organic TFTs, microcontact printing has been used to pattern gate electrodes, gate dielectrics, and source and drain contacts with sufficient yield to allow the fabrication of transistors. We were fabricated a pentacene OTFTs on flexible PEN film. Au/Cr was used for the gate electrode, parylene-c was deposited as the gate dielectric, and Au/Cr was chosen for the source and drain contacts; were all deposited by ion-beam sputtering and patterned by microcontact printing and lift-off process. Prior to the deposition of the organic active layer, the gate dielectric surface was treated with octadecyltrichlorosilane(OTS) from the vapor phase. To complete the device, pentacene was deposited by thermal evaporation and patterned using a parylene-c layer. The device was shown that the carrier field effect mobility, the threshold voltage, the subthreshold slope, and the on/off current ratio were improved.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.10-17
• /
• 2006

For orthogonal frequency division multiplexing (OFDM), cyclic prefix (CP) should be longer than the length of channel impulse response, resulting in a loss of bandwidth efficiency. In this letter, the CP reconstruction (CPR) technique is first applied to a multi-input multi-output (MIMO)-OFDM system with insufficient CP. The intercarrier interference (ICI) from multiple transmit antennas is so large for MIMO system that it can not be sufficiently suppressed with the conventional CPR procedure used in single-input single-output (SISO) system. A new minimum mean-square error (MMSE) equalization and ordering process is proposed for MIMO system to suppress the ICI during the CPR procedure. By applying the proposed CPR algerian to MIMO-OFDM system, we can obtain both the benefits of multiplexing gai and spectral efficiency gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.879-888
• /
• 1999

A Study on the ARQ scheme of data error control is important for more reliable information transmission. Since performance difference is large by the long transmission delay time in satellite communication, the performances of SR ARQ and conventional type-I hybrid ARQ with fixed code rate are investigated by using the parameters of packet length, channel capacity, BER, and transmission delay time especially. BCH code is used in type-I hybrid ARQ for FEC method. This paper presents the throughput analyses according to such various parameters as BCH code rate, window size, data rate and round-trip delay time. Especially we derive a performance equation of type-I hybrid ARQ with the factor of the transmission delay time using the equation of SAW ARQ. Also, the performance of type-I hybrid ARQ specially considering transmission delay time is analyzed through numerical analysis and computer simulation so we can get a important characteristics variation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.33-37
• /
• 2005

A micromixer plays an important role in Bio-MEMS or μ-TAS. Mixing is generally generated by turbulence and interdiffusion of two fluids. Because of low Reynolds number values (Re << 2000) within microchannels, it is difficult to generate turbulence, and consequently mixing mainly depends on interdiffusion. So, channel distance is often prohibitively long to mix two different fluids properly. To reduce this mixing length, we proposed a new mixer for micromixing in which two fluids were effectively mixed by an ultrasonic wave generated by PMN-PT. The ultrasonic wave was radiated into a chamber In the cross-sectional direction into the boundary surface formed by two fluids. The two fluids were positioned one on top of the other. The mixing state was measured by observing the color of samples due to the reaction of NaOH and phenolphthalein.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.55-64
• /
• 1988

Stow nets have widely been used in the western sea of Korea from the olden age. The original structure of a stow net is a large square-sectional bag net made of 4 netting panels, and the front fringes of top and bottom panels are connected to the top and bottom beams respectively. Wire ropes, which is originated from the holding anchor are gradually forked and biforked, and finally 4 pieces of wire rope (biforked pendants) are jointed to each beam. Much convenience caused by long and heavy beams were problemed, then some studies have been carried out to improve the net since 1930's. The most effective improvement were achieved in 1980 by Mr. Han and his colleagues. The key point of improvement was that the beams were removed and the belt shaped shearing device made by canvas was attached to the side panels, the head rope and ground rope to the front fringe of top and bottom panel, and biforked pendants are joined to the shearing device. Even though this is the epoch-making improvement of a stow net, the further study should be required to find out more effective method. The authors carried out a model experiment on the stow net to determine the vertical and horizontal opening of a net mouth, and also examine the front, top and side-view configuration of the net. The model net was constructed depending on the Similarity Law of Fishing Gear in 1/10 and 1/20 scale and set against to the current at shallow and speedy flowing channel. The vertical and horizontal openings were determined by using scaled bamboo poles, and the configuration was observed by using specially prepared observation platform and underwater observation glass, and also photographed by using specially prepared underwater photographic equipment. The results obtained can be summarized as follows: 1. The opening height and width of the shearing device varied in accordance with the relative length of the biforked pendants. Considering the height and width of shearing device in 6 cases of the arrangement system of biforked pendants, the best result was obtained in the case that the 2nd, 3rd and 4th pendents from the bottom-most was 5%, 9% and 4% longer than that. 2. On the top-view configuration the excessive deformation of head rope and ground rope were observed. In the actual net, 54m long head rope and ground rope were attached to the front fringe of top and bottom panels so that the head rope may be lifted to make the net mouth open highly. But actually the head rope and the ground rope are streamed backward without any lift, and also the netting followed the ropes were deformed until the 2/5 in the whole length of the net. This deformation may be guessed to disturb the entrance of fish school into the net and also caused the net to get caught by obstacles in the sea bed and to be broken largely. 3. Hydrodynamic resistance R of the actual net may be deduced as R(kg)=29.2$\times$103 v1.65. It is also expressed as R(kg)=5.9$\times$d/l$\times$ab v1.65. depending on the formula deduced by Koyama to estimate the resistance of trawl nets, where d/l denote the ratio between diameter of netting twine and length of mesh leg in every part of side panel, a and b, the stretched circumference of the mouth and the stretched length of the net, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.359-369
• /
• 2005

For large capacity optical CDMA networks, we propose a shared-type encoder/decoders based on an tunable wavelength converter(TWC) and an arrayed waveguide grating (AWG) router. The proposed encoder/decoder treats codewords of wavelength/time 2-D code simultaneously using the dynamic code allocation property of the TWC and the cyclic property of the AWG router, and multiple subscribers can share the encoder/decoder in networks. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using two wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC) and the generalized multi-wavelength Reed-Solomon code(GMWRSC). Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.837-843
• /
• 2006

IEEE802.15.3 and IEEE802.15.4 have defined the hybrid MAC protocols based on TDMA and CSMA where a multi-frame TDMA structure is employed so that multiple data frames can be transmitted within one timeslot to guarantee minimum delay bounds of isochroous traffic. However, TDMA has an intrinsic problem that cannot dynamically allocate optimal length of timeslot to each station. Therefore the idle timeslot can be produced by stations when each transmission queue is instantaneously empty during its timeslot, which would waste lots of timeslots especially in the multi-frame TDMA systems. In this paper, we propose a more flexible multiple-access scheme for the multi-frame TDMA system based on the concept of virtual slot which is accessible by every station with the highest priority for slot owner and lower priority for other stations. Finally, our simulation results from various environments show that proposed scheme can achieve magnitude improvement of total system throughput and average message delay by maximizing channel utilization.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.11-17
• /
• 2010

Multi-standard, multi-band, multi-service system to ensure a flexible interface between the SDR (Software Defined Radio) technology for the implementation of the Stability and Low-Power, Low-Calcualrion DDC (Digital Down Conversion) technology is essential. DDC technology consists of a digital channel filter. This is a typical digital filter because of the limited fisheries are vulnerable to overflow and rounding errors are drawbacks. In this paper, we overcome this disadvantage, we propose the structure of the DDC. The way WDF (Wave Digital Filter) Structural rounding error due to the structural resistance to noise. Therefore, This is the useful structure when the filter coefficients's word length is short. In addition, since IIR filters based on FIR filters based on the amount of computation is reduced because fewer than filter's tap. The proposed structure is used in DDC that CIC (Cascaded Integrator Comb) filter, WDF, IFOP (Interpolated Fourth-Order Polynomials) were analyzed with respect to, the results were confirmed by computer simulation.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.625-632
• /
• 2004

Since the H.264 encoding adopts both forward prediction and hi-direction prediction modes and exploits Variable Length Coding(VLC), the amount of data generated from video encoder varies as Flaying time goes by. The fixed bit rate encoding system which has limited transmission channel capacity uses a buffer to control output bitstream It's necessary to control the bitstream to maintain within manageable range so as to protect buffer from overflow or underflow. With existing bit amount control algorithms, the $\lambda_{MODE}$ which is relationship between distortion value and quantization parameter often excesses normal value to end up with video error. This paper proposes an algorithm to protect buffer from overflow or underflow by introducing a new quantization parameter against distortion value of H.264 video data. The test results of 6 exemplary data show that the proposed algorithm has the same PSNR as and up to 8% reduced bit rate against existing algorithms.