• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2664-2671
• /
• 2012

본 연구는 노인들의 신체적 특성이 보행 속도에 어떠한 영향을 미치는지 알아보기 위하여 시행되었다. 연구대상자는 보조도구의 사용에 관계없이 독립보행이 가능한 노인 77명(남 38명, 여자 39명)을 대상으로 하였다. 상관분석과 단계적 다중 선형 회귀분석을 사용하여 신체적 특성(연령, 성별, 신장, 체중, 신체질량지수, 근육량, 허리/엉덩이둘레비, 심박수, 폐활량, 유연성, 최대산소섭취량, 눈감고 한발 서기)과 하지 근력(슬관절 신전근, 슬관절 굴곡근)이 보행 속도와 어떠한 관련성이 있는지 분석하였다. 보행 속도는 연령, 신장, 폐활량, 눈감고 한발 서기 시간, 슬관절 굴곡근 및 신전근의 근력과 상관관계가 있었다. 또한 슬관절 굴곡근에 의해 보행 속도는 27%로 설명력을 가지고 있었으며, 슬관절 신전근 변수가 추가되었을 때 설명력은 32%로 높아졌다. 이러한 결과는 노인의 보행 속도가 하지의 근력과 다양한 신체적 특성에 영향을 받는다는 것을 의미한다.

• 대한통합의학회지
• /
• 제9권1호
• /
• pp.101-108
• /
• 2021

Purpose : The purpose of this study is to verify the effect of selective muscle strengthening of the knee joint extensor muscles using a pressure biofeedback unit to improve knee extensor strength and the balance ability of total knee replacement patients. Through this, we tried to provide clinical information. Methods : In this study, 12 patients with total knee replacement were recruited from a rehabilitation hospital. They were divided into two groups: a feedback group (n=6) and a control group (n=6). All patients received 30 minutes of continuous passive motion and leg-strengthening exercises for 15 minutes five times a week for two weeks. Subjects performed knee extension exercises with or without biofeedback units in the sitting position. The knee extensor strength and balance ability were measured before and after exercise. Knee extensor strength was measured by Biodex system 3 and balance ability was measured by Balancia software. Results : Both the experimental group and the control group showed a significant difference in the muscle strength of the knee joint extensor muscles after intervention (p<.05). In comparison, the experimental group showed a significant difference than the control group (p<.05). Both the experimental group and the control group showed a significant difference in the velocity average, path length, area 95 % center of pressure (COP), weight distribution, five times sit to stand test (FTSST) after intervention. In comparison, the experimental group showed a significant difference in velocity average, area 95 % COP, and FTSST than the control group (p<.05). Conclusion : In order to strengthen the knee extensor muscle and improve the balance ability in total knee replacement patients, it is necessary to consider providing pressure biofeedback unit during leg strengthening exercises.

• 대한통합의학회지
• /
• 제11권2호
• /
• pp.1-13
• /
• 2023

Purpose : Along with the rapid development of digital technology, the application of digital healthcare in the medical field is also increasing. According to many experts, increasing the amount of exercise and physical activity is a helpful way to prevent and manage physical problems in modern society. However, a lack of exercise, which is of the lifestyle of modern people, leads to the development of various diseases. This study aimed to examine the effects of digital exercise intervention using artificial intelligence (AI) on the physical abilities of adults whether digital exercise intervention can be a reliable and effective therapeutic option for musculoskeletal disorders in real-world clinical settings. Methods : In this study, exercise was conducted using a digital application to investigate the effects of an AI-based digital exercise intervention on the physical abilities of adults. A total of 13 adults were evaluated, and their physical abilities before and after the exercise intervention were compared. Hand-grip strength, functional leg muscle strength, dynamic balance, and quadriceps muscle strength were assessed. Exercise was performed using a digital application and in a non-face-to-face manner. AI identified the exercise status of each participant and adjusted the exercise difficulty level accordingly. The exercised daily for 4 weeks. Results : A total of 12 participants were analyzed for the final results. Significant improvements were observed in hand-grip strength, functional leg muscle strength (evaluated using the stand-up test), dynamic balance, and straight-gait ability (p<.05), indicating an increase in the overall muscular strength and physical function of the participants. Conclusions : Digital exercise intervention using AI is effective in improving physical abilities related to musculoskeletal function. It can be useful in clinical practice as an effective treatment option for patients with musculoskeletal disorders or muscle weakness.

• 대한산업공학회지
• /
• 제18권1호
• /
• pp.141-153
• /
• 1992

In order to evaluate task loads required by a majority of manual materials handling(MMH) jobs, we have performed the assessment of arm strength, leg strength and torso strength for Korean workers in a scientific and systematic manner. Two hundred and eighty five employees from two local manufacturing plants in Pohang participated in this project. Maximum voluntary strengths were assessed for the aforementioned three postures, and these data were classified by gender. These strength data were also used to generate a strength predicition model, which can estimate the maximum voluntary strength for a population with specific age, height and weight. These strength data will be used for the prevention of occupational injuries which are frequently incurred by overexertion in manual materials handling jobs.

• 대한물리치료과학회지
• /
• 제9권1호
• /
• pp.135-141
• /
• 2002

The purpose of this study was to investigate the effect of exercise therapy to oldwomen's muscle strength and IADL. The result of this study were the following : 1. The elderly group showed significant difference(p<.000) on effect of grip strength between pre and post after regular exercise. 2. The elderly group showed significant difference(p<.000) on effect of back strength between pre and post after regular exercise. 3. The elderly group showed significant difference(p<.000) on effect of leg strength between pre and post after regular exercise. 4. The elderly group showed significant difference(p<.000) on effect of IADL between pre and post after regular exercise. As a result of this study, the effect of exercise training program had improved muscle strength and IADL.

• 대한간호학회지
• /
• 제24권4호
• /
• pp.517-528
• /
• 1994

The purpose of this study was to compare the circumference, skinfold thickness and strength of the normal and casted lower limb prior to casting and following removal of the cast. The subjects for the study were nine orthopedic patients who had had long and short leg casts due to a tibial, fibula, or calcaneus fracture, or to a lateral collateral ligament rupture. Circumference, skinfold thickness, and strength of the normal and casted lower limb following removal of the cast were compared with those prior to the application of the cast. Measurements were made before cast application and after removal of the cast. Skinfold thickness was measured by fat caliper, circumference was measured by tape and strength was determined by measuring the length of time the leg was held elevated at 45$^{\circ}$. The results can be summarized as follows 1. There was no change in the normal limb in the circumference of the midthigh and midcalf after casting as compared to before cast application. 2. In the casted limb the circumference of the midthigh decreased by 3.23% and that of the midcalf decreased significantly by 7.49% during the period of casting. 3. In the normal limb skinfold thickness of the quadriceps decreased and that of gastrocnemius increased by 20.63% during the period of cast application. 4. In the casted limb skinfold thickness of the quadriceps decreased significantly by 12.37% and that of gastrocnemius decreased by 10% during the period of cast application. 5. Strength of the normal lower extremity decreased significantly by 48.37% and that of casted lower extremity decreased remarkably by 73.07% during the period of cast application. 6. Circumference of the midthigh and the midcalf decreased significantly by 7.6% and 9.4% respectively on the casted side as compared to the normal side. Skinfold thickness of the quadriceps and the gastrocnemius on the casted side decreased by 6.12% and 18.55% respectively as compared to the normal side and strength in the lower extremity on the casted side decreased significantly by 44.32% as compared to the nor-mal side. From these results, it may be concluded that muscle atrophy occurs in the casted lower limb and muscle strength of the normal lower limb are also reduced during the period of application of a leg cast.

• Steel and Composite Structures
• /
• 제42권1호
• /
• pp.1-22
• /
• 2022

In cold-formed steel (CFS) structures, such as trusses, transmission towers and portal frames, the use of back-to-back built-up CFS unequal angle sections are becoming increasingly popular. In such an arrangement, intermediate welds or screw fasteners are required at discrete points along the length, preventing the angle sections from buckling independently. Limited research is available in the literature on axial strength of back-to-back built-up CFS unequal angle sections. The issue is addressed herein. This paper presents an experimental investigation reported by the authors on back-to-back built-up CFS unequal angle sections with intermediate stiffeners under axial compression. The load-axial shortening behaviour along with the deformed shapes at failure are reported. A nonlinear finite element (FE) model was then developed, which includes material non-linearity, geometric imperfections and modelling of intermediate fasteners. The FE model was validated against the experimental test results, which showed good agreement, both in terms of failure loads and deformed shapes at failure. The validated finite element model was then used for the purpose of a parametric study comprising 96 models to investigate the effect of longer to shorter leg ratios, stiffener provided in the longer leg, thicknesses and lengths on axial strength of back-to-back built-up CFS unequal angle sections. Four different thicknesses and seven different lengths (stub to slender columns) with three overall widths to the overall depth (B/D) ratios were investigated in the parametric study. Axial strengths obtained from the experimental tests and FE analyses were used to assess the performance of the current design guidelines as per the Direct Strength Method (DSM); obtained comparisons show that the current DSM is conservative by only 7% and 5% on average, while predicting the axial strengths of back-to-back built-up CFS unequal angle sections with and without the stiffener, respectively.

• 대한물리치료과학회지
• /
• 제24권3호
• /
• pp.48-55
• /
• 2017

Purpose: this study was conducted on female university students in supine position and preformed the 2 bridge positions exercises, which are the bridge position exercise and the bridge exercise preformed with form rollers attached between their knees, in order to research the effects lumbar stabilization exercise has on lower extremity muscular strength. Method: In order for the participants to fully understand the topic and procedures of the experiment, they were given a 20 minutes of briefing and practice before the experiment. Result: Bridge exercise group and foam roller group were improved the knee flexion and extension strength. Conclusion: This research studied the difference of each lumbar stabilization positions and the effects they have on the fortification of the leg's flexion extension muscular strength, and by comparing which different exercise methods increase muscular strength the most works to plan a more optimal exercise method for lumbar stabilization.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3837-3851
• /
• 2021

To investigate how the fabrication and repair of socket welded joints could be used to enhance fatigue resistance under vibration condition, experimental test data of installation conditions that potentially influence fatigue strength were analyzed with the S-N curve. It was found that the decreasing fatigue strength of stainless steel socket welded joints was attributed to the effect of high heat input of welding process. The effect of welding method, slip-on gap and radial-gap conditions on fatigue strength was insignificant. The test data of repair technique application, 2 × 1 leg length and of socket weld overlay, clearly showed higher fatigue strength but there was a limitation for higher stress region because of the weld toe crack.

• 기술사
• /
• 제24권3호
• /
• pp.43-50
• /
• 1991

On the ground foundation works for Bldg site, Rock classification test can be obtained as follows due to the International Society for Rock Mechanics. 1. In-take test ; Compression strength, Point load test. 2. In-situ test : Schmidt hammer test. Burden test finaly the convinient co-relation table between strength and S.H. test were carried out for site-engineer. This project is one of contineous works regarding to Burden test from Jack leg drill( ø 36mm) to Crawler drill( ø 75mm) use.