• Journal of Chest Surgery
• /
• v.29 no.9
• /
• pp.945-950
• /
• 1996

Twelve patients with left ventricular-right atrial shunt (LV-RA shunt) underwent surgical correction be- tween April 1982 and March 1995. Seven patients were male and five patients were female. Age ranged from 3 to 26 years with mean age of 8.5 years. On the preoperative chest PA views, increased pulmonary vascularity was noted in 3 cases and enlargement of right atrium in 4 cases. The mean preoperative cardiothoracic ratio was 0.59. Echocardiographic studies were obtained in 9 patients and the preoperative echocardiographic diagnoses were LV-RA shunt in 2 cases, ventricular septal defect (VSD) in 6 casei, and atrial septal defect (ASD) in 1 case. The preoperative ngiographic diagnoses which were obtained in all patients were LV-RA shunt in 5 cases, VSD in 5 cases, ASD in 1 case, and VSD with ASD in 1 case. The descriptions of defect of LV-RA shunt according to intraoperative findings were supravalvular defect in 5 cases(42%), infravalvular defect in 4 cases (33%), and combined defect in 3 cases (25%). Associated anomalies of tricuspid valve in 4 cases of infravalvular defect were perforation (3 cases) and cleft (1 case). Primary closure of the septal defect was performed through the right atriotomy in all but one patient. There was no operative death. One patient underwent reoperation because of the residual interventricular shunt. All patients have been in good condition.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.15-21
• /
• 2010

A differential case equipped with LSD(limited slip differential) has several advantages over a normal type for rear wheel drive vehicles. Specially, the torque distribution can be done between left and right drive wheel in the state of limited slip differential. Also although LSD types are very various according to operating type, medium and torque distribution, a multi-clutch type is generally applied to rear wheel drive vehicles. So, this study presents the analysis of design parameters for development of a friction plate for multi-clutch type LSD using vehicle road test, the simulation of analytical model and the development of vehicle dynamics model by a benchmark product. According to this investigation, the design parameters which are pre-load of coil spring, friction plate and contact area quantity, friction coefficient and TBR(torque bias ratio) for a friction plate are derived from experiment and simulation and consequently, vehicle dynamics model has been constructed for the development of friction plate for multi-clutch type LSD.

• Journal of Radiation Industry
• /
• v.10 no.4
• /
• pp.193-198
• /
• 2016

Perfusion magnetic resonance image of biological mechanism are independent of magnetic field strength in hyper acute ischemic stroke. 3.0 T magnetic field, however, does affect the SNRs (signal to noise ratio) and artifacts of PMRI (perfusion magnetic resonance image), which basically will influence the quantitative of PMRI. In this study, the effects of field strength on PMRI are analyzed. The effects of the diseases also are discussed. PMRI in WM(white matter), GM (gray matter), hyper acute ischemic stroke were companied with 1.5 T and 3.0 T on SNR. PMRI also was compared to the SI difference after setting ROI(region of interest) in left and right side of the brain. In conclusion, the SNRs and SI of the 3.0 T PMRI showed higher than those at 1.5 T. In summary, PMRI studies at 3.0 T is provided significantly improved perfusion evaluation when comparing with 1.5 T.

• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.387-392
• /
• 1994

Purpose : This study was done to confirm the reference point variation according to variation in applicator configuration in each fractioation of HDR ICR. Materials and Methods : We analyzed the treatment planning of HDRICR for 33 uterine cervical cancer patients treated in department of therapeutic radiology from January 1992 to February 1992. Analysis was done with respect to three view points-Interfractionation A point variation, interfractionation bladder and rectum dose ratio variation, interfractionation treatment volume variation. Interfractionation A point variation was defined as difference between maximum and minimum distance from fixed rectal point to A point in each patient. Interfractionation bladder and rectum dose ratio variation was defined as difference between maximum and minimum dose ratio of bladder or rectum to A point dose in each patient, Interfractionation treatment volume variation was defined as difference between miximum and minimum treatment volume which absorbed over the described dose-that is, 350 cGy or 400 cGy-in each patient. Results The mean of distance from rectum to A point was 4.44cm, and the mean of interfractionation distance variation was 1.14 cm in right side,1.09 cm in left side. The mean of bladder and rectum dose ratio was $63.8\%$ and $63.1\%$ and the mean of interfractionation variation was $14.9\%$ and $15.8\%$ respectively. With fixed planning administration of same planning to all fractionations as in first fractionation planning-mean of bladder and rectum dose ratio was $64.9\%$ and $72.3\%$.and the mean of interfraction variation was $28.1\%$ and $48.1\%$ reapectively. The mean of treatment volume was $84.15cm^3$ and the interfractionation variation was $21.47cm^2$. Conclusion : From these data, it was confirmed that there should be adapted planning for every fractionation ,and that confirmation device installed in ICR room would reduce the interfractionation variation due to more stable applicator configuration.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.881-889
• /
• 2016

Ocular region recently emerged as a new biometric trait for overcoming the limitations of iris recognition performance at the situation that cannot expect high user cooperation, because the acquisition of an ocular image does not require high user cooperation and close capture unlike an iris image. This study proposes a new method for ocular image recognition based on BRISK (binary robust invariant scalable keypoints). It uses the distance ratio of the two nearest neighbors to improve the accuracy of the detection of corresponding keypoint pairs, and it also uses geometric constraint for eliminating incorrect keypoint pairs. Experiments for evaluating the validity the proposed method were performed on MMU public database. The person recognition rate on left and right ocular image datasets showed 91.1% and 90.6% respectively. The performance represents about 5% higher accuracy than the SIFT-based method which has been widely used in a biometric field.

• Journal of Chest Surgery
• /
• v.15 no.3
• /
• pp.274-277
• /
• 1982

A Clinical analysis of 59 patients of thoracic empyema was done who were received surgical intervention at dept. of thoracic surgery of the C.A.F.G.H. in the period of 2.5 years from January 1979 to June 1982. Occurrence ratio of Left and Right side pleural cavity of empyema was 1: 1.4. The predisposing factors of empyema were pulmonary Tbc. [49%], Chest pain [25%], Cough [8%], in order. B.P.F. was associated with empyema in 5 cases. The pleural cavity empyema was treated with several surgical procedures and conservative measures. Among of the 59 cases, the 30 cases [50%] were treated with decortication, 12 cases [20%] with closed thoractomy drainage, 9 cases with frequent thoracenteses, 5 cases with partial decortication and thoracoplasty and 3 cases with open thoracostomy tube drainage. Among of the 59 cases thoracic empyema, the full recovery were in 32 cases [54%], partial recovery in 20 cases [34%], not improved in 3 cases [5%] and 3 cases were died. The mortality rate was 5% and the recovery rate was 89%.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.403-411
• /
• 2016

Objective: This study is concerned with the user interface (UI) design of touch screen based on the reaction time of Automated Teller Machine (ATM) user. Background: Adopting the touch screen technology, the ATM service has recently established a new user interface different from the existing button-type interface. Method: Experiments were conducted by simulating ATM touch screen layouts, and layouts were focused on location of menu buttons (left and right, top and bottom), number of menu buttons (8 and 12 buttons). Results: The results show that there are significant differences in correction ratio and reaction time by user groups, types of menu location, and the number of buttons. Conclusion and Applications: The results of this study can be used to provide baseline information for the interface design of ATM touch screen and the age differences in reaction time.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.163-168
• /
• 2011

A Fabry-Perot cavity (FPC) antenna producing both high-gain and circularly-polarized (CP) behavior is proposed. To increase antenna gain and obtain CP characteristics, a superstrate composed of square patches with a pair of truncated corners is placed above the linearly polarized patch antenna with an approximately half-wavelength distance from the ground plane at the operating frequency. The proposed antenna has the advantages of high gain, a simple design, and an excellent boresight axial ratio over the operating frequency bandwidth. Moreover, used in an FPC antenna, the proposed superstrate converts a linear polarization produced by a patch antenna into a circular polarization. In addition, the cavity antenna produces left-hand circular-polarization and right-hand circular-polarization when a patch antenna inside the cavity generates x-direction and y-direction polarization, respectively. The measured and simulated results verify the performance of the antenna.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.6
• /
• pp.302-314
• /
• 2023

PURPOSE. The aim of this study was to classify the shapes of retromolar pads and assess their morphometric differences using a 3D model. MATERIALS AND METHODS. Two hundred fully edentulous or Kennedy Class I partially edentulous patients (400 retromolar pads) were enrolled. Scan data of the definitive mandibular casts produced through functional impressions were obtained using a 3D laser scanner. Seven parameters (transverse diameter, longitudinal diameter, transverse-contour length, longitudinal-contour length, longitudinal/transverse diameter ratio, longitudinal/transverse-contour length ratio, and angle of the retromolar pad line to the residual alveolar ridge line) were measured using image analysis software. Subsequently, the pads were classified according to the shape. Statistical analyses were performed using 95% confidence intervals. RESULTS. Classifying the retromolar pads into three shapes led to high intra-examiner reliability (Cronbach's alpha = 0.933). The pear shape was the most common (56.5%), followed by oval/round (27.7%) and triangular (15.8%) shapes. There were no significant differences between the left and right sides according to the shape and no significant differences in any parameter according to age. The transverse diameter and longitudinal/transverse diameter ratio differed between sexes (P < .05). The triangular shape had a significantly different transverse diameter, transverse-contour length, longitudinal/transverse diameter ratio, and longitudinal/transverse-contour length ratio compared with the pear and oval/round shapes (P < .05). CONCLUSION. From a clinical reliability standpoint, classifying retromolar pads into three shapes (oval/round, pear-shaped, and triangular) is effective. The differences in the sizes among the shapes were attributed to the transverse measurement values.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.33-50
• /
• 1984

The purpose of this study was to investigate whether the ashed tooth powder is utilized as an alternative material of the implant to recovery the bony defect. For this purpose its biocompatibility was evaluated comparing to the synthetic calcium phosphate compounds, such as Syntograft and Calcitite, as well as the vacuum firing porcelain (Ceramco Inc.) which is anticipated to use as a matrix to aid sintering. Bony defects to exposure the bone marrow, $3{\times}5$ mm in size, were created in the right and left tibias of fifteen rabbits, and then the ashed tooth powder at $950^{\circ}C$, the porcelain powder, Syhtograft and Calcitite were inserted in the defects of twelve rabbits of the experimental group and the blood clot only was filled in the defects of three rabbits of the control group. The experimental and control rabbits were sacrificed at 1st, 2nd 3rd week after implantation and the histologic examination was performed. The ashed tooth powder in order to make the needed form of the implant was molded using the cylindrical mold 1 cm high, 1 cm in diameter under the pressure of $1000kg/cm^2$ and the ashed tooth powder was sintered at $1100^{\circ}C$ for 1 hour and the mixture of the porcelain powder and the ashed tooth powder at the weight ratio of 7:3, 6:4, 5:5, 4:6 were molded in the same manner and were sintered at $925^{\circ}C$. From this sintered material, square shaped implants were prepared in the dimension of $2{\times}4{\times}6mm$. The prepared implants were surgically placed in the subperiosteum of lateral surfaces of the right and left mandibular bodies. The dogs were sacrificed at 4 weeks, and then the specimens were examined using the light and scanning electron microscopes. The results of this study were obtained as follows: 1. Any inflammatory response was not noted after implanting of the ashed tooth powder, Syntograft, Calcitite and the porcelain powder during the whole experimental period after implantation. 2. Induction of the new bone formation was significantly shown in the ashed tooth powder, Syntograft and Calcitite. 3. The more the porcelain powder was contained in the implants, the more the porosity was and the bigger the pore size was under the scanning electron microscope. And there was ingrowing of the fibrous connective and the osteoid tissue. 4. The osteoid tissues were found to be directly fused to the implant of the ashed tooth powder, and the mixture implant of the porcelain powder and the ashed tooth powder at the weight ratio of 4:6 under the light and scanning electron microscopes.