• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.262.2-262.2
• /
• 2013

ZnO는 광학적 및 전기적 성질의 여러 가지 장점 때문에 메모리, 나노발전기, 트랜지스터, 태양전지, 광탐지기 및 레이저와 같은 전자소자 및 광소자로 여러 분야에서 다양하게 사용되고 있다. Al이 도핑된 ZnO 나노결정체를 전기화학적 증착법을 이용하여 형성하고, 형성시간의 변화에 따른 구조적 및 광학적 성질을 관찰했다. ITO로 코팅된 유리 기판에 전기화학증착법을 이용해 Al 도핑된 ZnO를 성장시켰다. Sputtering, pulsed laser vapor deposition, 화학기상증착, atomic layer epitaxy, 전자빔증발법 등으로 Al 도핑된 ZnO 나노구조를 형성할 수 있지만, 본 연구에서는 간단한 공정과정, 저온증착, 고속, 저가의 특성 등으로 경제적인 면에서 효율적인 전기화학증착법을 이용했다. 반복실험을 통하여 Al의 도핑 농도는 Zn와 Al의 비율이 98:2이 되도록, ITO 양극과 Pt 음극의 전위차가 -2.25 V가 되도록 실험조건을 고정했고, 성장시간을 각각 1분, 5분, 10분으로 변화하였다. 주사전자현미경 사진을 보면 Al 도핑된 ZnO는 성장 시간이 증가함에 따라 나노구조의 직경이 커지는 것을 알 수 있다. 광루미네센스 측정 결과는 산소 공핍의 증가로 보이는 500~600 nm대의 파장에서 나타난 피크의 위치가 에너지가 큰 쪽으로 증가했다. 위 결과로부터 성장 시간에 따른 Al 도핑된 ZnO의 구조적 및 광학적 특성변화를 관찰했고, 이 연구 결과는 Al 도핑된 ZnO 나노구조 기반 전자소자 및 광소자에 응용 가능성을 보여주고 있다.

• Journal of Marine Bioscience and Biotechnology
• /
• v.5 no.4
• /
• pp.40-45
• /
• 2011

Microalgae are one of the major, sustaining components of ecosystem processes and are responsible for biogeochemical reactions that drive our climate changes. Despite this, many marine microalgae are poorly described and little is known of their abundance and distribution along the coastal areas of Sooyoung Bay, Busan, South Korea. The present study has been conducted from November, 2011 to August, 2009 with the objective to provide an overview of the taxonomy diversity and abundance of microalgae along the coastal areas of the Sooyoung Bay. Water samples were collected from different sites, which were located by using a GPS tracker. Chlorophyll fluorescence of the water samples were measured by using ToxY-PAM dual-channel yield analyzer. The chlorophyll fluorescence values were relatively higher during the spring and summer and even in the region near to the sea port. Similarly the abundance of microalgae was higher near the port but diversity index had lower values. The temperature and pH values were same at all the sites. However, only the temperature varied during the sampling period, with higher values during summer and lower in winter. From the preliminary results, the following class of microalgae were found; Bacillariophyceae, Dinophyceae, Silicoflagellate and Cryptophyceae. With a future ongoing work, microalgae are being isolated to establish single cell culture and for identification using light microscopic observations, photography and molecular approaches.

• Korean Journal of Food Science and Technology
• /
• v.4 no.2
• /
• pp.90-94
• /
• 1972

Protein and carbohydrate contents in polished barley were investigated for two leading varieties in Korea. The contents of crude protein $(total\;nitrogen{\times}5.83)$ were 8.60% for mean. 15.39% for maximum and 6.06% for minimum, and only one third of 22 varieties showed values above mean. the contents of crude protein was significantly correlated with dye binding capacity $(r=0.82^{**})$but insignificantly carbohydrate content. Kyong No.1 (15.39%), Kwan-Chui-Gi (12.42) and Yong-Weul-Yuk-Kak (11.95) can be classified as high protein varieties having appear to be unpopular to farmers. About 50% of barley field was occupied by varieties having protein content above mean, and Kyongnam-Daimaik no.89 (6.76%) a low protein variety, occupied about 8% of barley field, during last decade with little change.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.49-57
• /
• 2020

Conventional electric motors are not suitable for aircraft because of their large size and weight. High-temperature superconducting (HTS) motors have high current density, high magnetic field density, and low loss, so they can significantly reduce the size and weight compared to general electric motors. This paper presents the conceptual design and analysis results of HTS motors for electric propulsion in future aircraft. A 2.5 MW HTS motor with a rotational speed of 7,200 RPM was designed and the specific power (kW/kg) was analyzed. The operating temperature of the field coil of the HTS motor is 20K in consideration of LH2 cooling. The stator winding were connected in a multi-phase configuration and Litz wires were used to minimize eddy current losses. As a result, it was confirmed that the specific power of the motor is about 18.67 kW/kg, which is much higher than that of the conventional electric motor.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.117-128
• /
• 2005

This study presented the route location method by applying AHP and evaluating quantitatively. This study developed the program that can be easily applied to this kind of road design, and built the decision support system fur route location. The study results are summarized as follows : We could quantitatively evaluate the appropriateness of exiting routes by applying the AHP based on GIS. If we apply this to the roads that will be newly constructed, we can make the objective and reliable route location when making road plans and basic designs. We improved the technique of route location by applying the decision support system with third-dimensional data, which considers even the vertical alignment plan, to the existing decision support system with second-dimensional data. had, since we call set those data such as vertical slope, earth-volume, structure size, location and construction cost to independent variables, we can make road designs more scientifically and reasonably.

• Journal of Korea Multimedia Society
• /
• v.11 no.7
• /
• pp.956-965
• /
• 2008

H.264/AVC is the newest video coding standard of ITU-T VCEG and the ISO/IEC MPEG, offering a significant performance improvement over previous video coding standards. However, the computational complexity of H.264/AVC is drastically increased because of new technologies such as intra prediction, variable block size, quarter-pels motion estimation/compensation, etc. In this paper, we propose a fast intra prediction scheme which has two step processing. The first step is a fast block size decision which can be calculated only in one block without considering all cases of $4{\times}4$ block and $16{\times}16$ block. The complexity of the intra prediction can be reduced by using boundary difference values of macroblock. After selecting the block size, we can make mode decision using the neighbouring reference pixels and representative pixels of the block in the second step. The experimental results show that the proposed algorithm saved on the average 41.5% encoding time without any significant PSNR losses.

• Journal of Korean Neurosurgical Society
• /
• v.39 no.6
• /
• pp.409-412
• /
• 2006

Objective : Primary central nervous system lymphoma[PCNSL] is a non-Hodgkin's lymphoma arising in the central nervous system. Combined chemotherapy and radiation therapy is the standard treatment for PCNSL. However, treatment induced neurotoxicity is a major problem especially in elderly patients. Methods : From May 2001 to April 2004, elderly five patients with PCNSL confirmed via pathological examination were underwent Novalis radiosurgery in authors' institution, who were investigated retrospectively. Of these patients, 2 were male and 3 were female, with a mean age 68 years old [range $65{\sim}73$]. The number of lesions was 1 in 2 patients, 2 in 2, and 3 in 1. The mean follow up period was 12.6 months [range $8{\sim}16$]. Results : Clinical symptoms and signs in all patients markedly improved within 1 weeks after Novalis radiosurgery. The Karnofsky performance status score was also improved from a pre-radiosurgery average of 68 to a post-radiosurgery one of 82. All of treated lesions showed a partial or complete regression of the original mass. There have been no complication following Novalis radiosurgery. Conclusion : The preliminary results of our experience indicate that radiosurgery with Novalis provides a safe and effective therapeutic alternative treatment of PCNSL in elderly patients.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.2
• /
• pp.150-155
• /
• 2001

Between January 1995 and May 1998, 177 patients with proven lumbar disc herniation were treated by microdiscectomy or by percutaneous endoscopic discectomy(PED). Among them, 43(24.2%) patients underwent PED and were followed for long term outcome. We included only those patients who were followed up more than 13 months. Three patients who did not improved immediately after PED and underwent microdiscectomy were excluded for this study. Of remaining 40 patients, there were 22 men and 18 women who ranged in age from 23 to 68 years (mean 38.1 years). The disc herniations were located at L1-2(1), L2-3(1), L3-4(1), L4-5(26) and L5-S1(11). Three patients were treated by biportal approach. The mean follow up period was 34.7 months(range 13-47 months). Overall, excellent and good results were achieved in 12(30%) and 19(47.5%) patients, and fair and poor results in 7(17.5%) and 2(5%) patients, respectively. Thirty-eight(95%) patients returned to their previous works and the mean duration was 5.7 months. Thirty-three(82.5%) patients answered that they would recommend this procedure to others. There was no complication except for one patient who suffered from discitis. The indication of PED is restricted to contained or small subligamentous lumbar disc herniation without stenosis, spondylolisthesis and sequestration. PED can be performed under local anesthesia and tissue trauma, risk of epidural scarring, hospitalization time and postoperative morbidity are minimal. The result of the present study justify the assumption that PED can be a surgical alternative for patients suitable for its indications.

• Journal of KIISE:Software and Applications
• /
• v.33 no.6
• /
• pp.539-549
• /
• 2006

Component-Based Development (CBD) has emerged as a new effective technology that reduces development cost and time-to-market by assembling reusable components in developing software. The degree of conformance to standards and common features in a domain largely determines the reusability of components. In addition, variability within commonality should also be modeled and customization mechanism for the variability should be designed into components. Enterprise JavaBeans (EJB) is considered a most suitable environment for implementing components. However. the reusability of EJB is limited because EJB does not have built-in variability design mechanisms. In this paper, we present efficient variability design techniques for implementing components in EJB. We propose a method to customize the variability of EJB-based components by applying three variability design mechanisms; selection, plug-in, and external profile. And we elaborate the suitable situations where each variability design mechanism can be applied, and conduct a technical comparison to other approaches available.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.807-813
• /
• 2000

One hundred fifty grams of Korean fermented soybean paste and hot pepper-soybean paste were packaged in glass jar of 232 mL and Sotred at 5, 13, 22 and 30℃. During the storage, the changes in their microbial flora and quality attributes were monitored. Carbon dioxide production rate from the stored pastes were also determined from initial change of CO₂concentration in headspace of the pack. Hot pepper-soybean pate showed much higher CO₂ production rate higher dependence of CO₂ production on temperature compared to soybean paste. Total aerobic bacteria count and lactic acid bacteria count did not change significantly through the storage. Yeast count in soybean paste decreased slowly after initial uprise while that of hot pepper-soybean paste steadily decreased. Surface color of hot pepper paste changed to dark red with slight decrease in 'L' value and slight increase in 'a' and 'b' values, whereas any significant color change was not observed in soy paste. Titratable acidity increased with time with higher increase in soybean paste, but pH stayed at constant level for both pastes. All the rates of quality change were higher with higher temperature. Pressure buildup due to CO₂ production needs to be considered first in designing the packages of the fermented pastes before their color changes and other chemical quality changes.