• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.9
• /
• pp.1168-1173
• /
• 2008

To utilize the abandoning byproducts after manufacturing fresh vegetable juice, Hericium erinaceum (H. erinaceum) was cultured using Angelica keiskei (AK) and the byproducts of Angelica keiskei (BAK) as anutrient and the chemical composition of the culture extract was analyzed. When H. erinaceum was cultured using culture media of AK and BAK, it showed 107{\sim}112 mm of growth during 40 days. The moisture contents of AK and BAK extracts were 94.36 and 97.36%, respectively; however, those of extracts of H. erinaceum cultured in AK and BAK decreased to 90.95 and 94.20%, respectively. Reversely, other chemical compositions were increased. The vitamin A content of AK extract was 20.78 IU/100 mL and was higher than those of other extracts. However, vitamin A was not detected in extracts of H. erinaceum cultured with AK and BAK. In contrast, vitamin $B_2$ and C in the extracts of H. erinaceum cultured were higher than those of AK and BAK. Total ash content including Fe, P, Mg, and Ca increased in the extracts of H. erinaceum cultured when compared with AK and BAK extracts. Total amino acid content was also higher in the extracts of H. erinaceum cultured (231.08 and 372.25 mg%) than those in the extracts of AK (177.17 mg%) and BAK (149.99 mg%).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.1
• /
• pp.1-13
• /
• 2005

This study is for the construction of Cheo-Yongdance Costumeby historical research based on Ak-Hak-Gue-Peom(樂學軌範). Through the production of Cheo-Yongdance Costume by historical research, it is examined and this study is expected that be a help of the right succession of a traditional costume. Cheo-Yongdance Costumeis draught to real size by comparing the size and picture suggested in Ak-Hak-Gue-Peom. In the specialty of Cheoyong(處容) dance Costume in the drawing, the length of clothes was 152cm that is longer than the length of the excavated Danlyeong(團領) of Chosun Dynasty period. Width was 81.9cm that is very big and the width of Danlyeong is 11.7cm. The sleeve length of Hansam(汗衫) is 20O.60cm and it is one that attached Hansam to Jeogori(저고리). The material used for Cheoyong dance Costume is Dan(緞), Cho, Joo(紬), Red gold patterned brocade(紅金線). At the same part, and as the goal was differently used at the same clothing. As the methods of dyeing, the process of dyeing naturally is suggested. A gardenia seeds, indigo plant, and ink stick are used for the color of blue, red, yellow and black. The producing process is made in concrete by suggesting the process of producing clothing. Danlyeong is required the technique of smoothing out wrinklesin case of attaching. Goon(裙) was made by making plaits below and attaching string for making form in the literature. Ui(衣), Chon-ui(天衣) and Goon(裙)'s Bang-sul(方膝) are drawn a Man-hwa Mun(蔓花紋) on Ak-Hak-Gue-Peom by using the golden dyeing material. As the result of producing the clothe by using the recorded size in Ak-Hak-Gue-Peom, it could be examine a pertinent dance clothing for expressing the dance performance with big motions.

• Information Display
• /
• v.4 no.4
• /
• pp.11-13
• /
• 2003

양방향 TV 시대에는 해상도 뿐만 아니라 사운드의 다양화 및 고음질화 되어 시각과 청각 특성 모두가 현장감, 박진감에 버금하는 시스템으로 변경되는 홈시어터 경향으로 더불어 오락 경기도 PC Game에서 Video Game의 위주로 전환 싯점에서는 사운드의 현장감은 더욱 더 절실히 요구되므로, 마이크폰닉에 대한 CRT의 특성 보완이 절실히 요구된다. 따라서, 본 보고서는 열적 변형과 좌굴에 의한 구조물의 안정성을 확보하기 위해서 Invar와 AK의 복합인 Claded Steel에 대한 좋은 특성을 소개하고자 한다.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.1
• /
• pp.1-16
• /
• 1986

Fifty-one strains of Pseudomonas aeruginosa were isolated from various clinical specimens. Among them, 26 (51%) strains were gentamicin-resistant (Gm') and 25 (49%) were susceptible to gentamicin (Gm'). The frequencies of resistant strains to piperacillin (Pi), cefotaxime, moxalactam, cefoperazone (Cz), and amikacin (Ak) ranged from 21.6 to 31.4%, and $MIC_{50}$ of these drugs were lower than the critical concentrations of susceptibility and resistance. Thirty (58.8%) strains were multiply resistant to 12 or more drugs. All Gm' strains were multiply resistant to 12 or more drugs and one was resistant to all 18 drugs tested, while only four Gm' strains were multiply resistant to 12 drugs and the multiplicity of resistance of the other Gm' strains were less than 10 drugs. Resistance to Gm appeared to have a significant correlation with the resistance to tobramycin (Tb), Ak, Pi, and Cz. All Gm' strains were resistant to Tb and about 38.4 to 46.1% of them were resistant to Ak, Pi, and Cz. The incorporation of $Ca^{++}$ and $Mg^{++}$ ions in Mueller-Hinton agar (MHA) did not influence the MICs of Gm, Tb, carbenicillin (Cb), Pi, and Cz as compared with the results obtained in MHA without these ions. Gm strains were studied on the combined effect of beta-lactam antibiotics and aminoglycosides by the methods of checkerboard and modified paper strip diffusion. Most Gm' strains showed significant synergistic effects by the FIC index between Ak and three beta-lactam antibiotics; Cb, Pi, and Cz, but these results did not in agreement the results obtained through the method of modified paper strip diffusion test. In order to know the nature of the drug resistance of P. aernginosa, the plasmid profile analysis was studied. Agarose gel electrophoresis of lysates processed by the method of Kado and Liu showed one or more plasmids in 22 (43.1%) strains. A group of 19 strains showed at least one band of plasmid and three strains two bands. The range of the molecular weight of plasmids was 3.8 to 243 Mdal. All strains carrying large plasmids larger than 200 Mdal were isolated from wound specimens. Three Gm' strains also harboured the plasm ids of 13 to 203 Mdal.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.376-383
• /
• 2011

The CMCs of LA and LA3 nonionic surfactants obtained from the reaction between glycidol and lauryl alcohol were found to be $0.97{\times}10^{-3}mol/L$ and $1.02{\times}10^{-3}mol/L$ respectively and the surface tensions for 1 wt% surfactant were 26.99 and 27.48 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer showed that the adsorption rate of surfactant molecules at the interface between the air and the surfactant solution was found to be relatively fast in both surfactant systems, presumably due to the high mobility of surfactant molecules. The contact angles of LA and LA3 nonionic surfactants were 27.8 and $20.9^{\circ}$ respectively and the dynamic interfacial tension measurement by a spinning drop tensiometer showed that interfacial tensions at equilibrium condition in both systems were almost the same. Also both surfactant systems reached equilibrium in 2~3 min. Both surfactant solutions showed high stability when evaluated by conductometric method and the LA nonionic surfactant system provided the higher foam stability than the LA3 nonionic surfactant system. The phase behavior experiments showed a lower phase or oil in water (O/W) microemulsion in equilibrium with an excess oil phase at all temperatures studied. No three-phase region was observed including a middle-phase microemulsion or a lamellar liquid crystalline phase.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.1
• /
• pp.17-31
• /
• 1986

Forty clinical isolates of Serratia marcescens were tested for their susceptibility to 19 antimicrobial drugs and studied on the molecular characteristics of R plasmids. Cefotaxime (Ct) was the most effective drug and only 2 (5%) strains were resistant to this drug. Thirteen to 18% of strains were resistant to cefoperazone (Cz), amikacin (Ak). and trimethoprim (Tp), and 28 to 40% were resistant to piperacillin (Pi), nalidixic acid (Na), gentamicin (Gm), and cefoxitin (Cx). A majority of strains were resistant to carbenicillin (Cb), tobramycin (Tp), kanamycin (Km), and cefamandole (Cd), and all to cephalothin. One half of the isolates were resistant to 10 or more drugs. $MIC_{90}$ of Pi to Gm-resistant strains (Gm') were 8 times higher than that to Gm-susceptible strains (Gm'), but $MIC_{90}$ of Ak, Cx, Ct, and Cz were almost the same between both Gm' and Gm' strains. Nine (23.7%) strains among 38 of multiply drug-resistant S. marcescens transferred conjugally their partial patterns of resistance to E. coli or Klebsiella strains, and two S. marcescens strains producing bacteriocin transferred their resistance to Klebsiella only, but not to E. coli. The plasmid profiles of S. marcescens were studied by the methods of SDS lysis and agarose gel electrophoresis. Twenty-four (60%) strains carried one to four plasmids of 1.4. to 144 Mdal, and conjugative R plasmids of 49 to 127 Mdal were noted in transconjugants. MIC levels of drugs in transconjugants were variable by the R plasmids and recipient strains.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.210-218
• /
• 1999

Sheet deposition type rapid prototyping system have many advantages : high build speed, low operating cost, large part size, no phase change, no need for support generation, and forth. However, those sheet deposition type rapid prototyping system require an additional post processing to remove excessive material attached to the part. This post processing is time consuming and labor intensive. Moreover, it is difficult for those system to fabricate parts with hollow cores and internal cavities. A new sheet deposition type rapid prototyping system that minimizes the post processing is proposed. The proposed system automatically removes excessive material in a peeling-off process between two cutting processes. In this way, the proposed system can reduce the post-processing time and cost as well as the limitation of the feasible geometric shapes in the conventional sheet deposition system.

• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• The Journal of the Korean Society for Microbiology
• /
• v.35 no.3
• /
• pp.239-250
• /
• 2000

Sixty-eight clinical isolates of Stenotrophomonas maltophilia from inpatients of 2 university hospitals in Taegu were epidemiologically analyzed by using the minimum inhibitory concentrations of 25 antimicrobial drugs, biochemical reaction, pulsed-field gel elctropgoresis (PFGE), and PCR with enterobacterial repetitive intergenic consensus sequences as primer (ERIC-PCR). 1. All the strains were susceptible to minocycline. More than 57% were susceptible to sulfisomidine (Su), ciprofloxacin (Ci), Ofloploxacin (Of), nalidixic acid (Na), and chloramphenicol (Cm), and $19{\sim}35%$ to ceftazidime (Cd), trimethoprim (Tp), Ticacillin-clavulanic acid, and cefoperazone-sulbactam. Most isolates were resistant to ${\beta}$-lactam antibiotics such as ampicillin (Ap), carbenicillin (Cb), cefotaxim (Ct), cefoxitin (Cx), and aminoglycosides including gentamicin (Gm), tobramycin (Tb), amikacin (Ak). 2. All the isolates were multiply resistant of 5 to 17 drugs and showed 40 different resistance pattern types. 3. All the strains showed very similar biochemical reactions except ${\beta}$-galactosidase and nitrate reduction test. Fourteen strains selected randomly were classified 10 different pattern type by PFGE and ERIC-PCR. These two methods showed identical result. Four strains isolated from wound in 1994 showed similar MIC pattern and identical API 20NE profile, PFGE, and ERIC-PCR pattern indicating episodes of cross-infection among patients. These results indicate that PFGE or ERIC-PCR profile has comparable discriminatory power for epidemiological typing of S. maltophilia.