• 핵의학기술
• /
• 제27권2호
• /
• pp.95-98
• /
• 2023

Purpose: The precision error of a bone density meter reflects the equipment and reproducibility of results by an examiner. Precision error values can be expressed as coefficient of variation (CV), CV%, and root mean square-SD (RMS-SD). The International Society for Clinical Densitometry (ISCD) currently recommends using RMS-SD as the precision error value. When a 95% confidence interval is applied, the least significant change (LSC) value is calculated by multiplying the precision error value by 2.77. Exceeding the LSC value reflects a significant difference in measured bone density. Therefore, the LSC value of a bone density equipment is an essential factor for accurately determining a patient's bone density. Accordingly, we aimed to calculate the LSC value of a bone density meter (Lunar iDXA, GE) and compare it with the value recommended by the ISCD. We also assessed whether the value measured by the iDXA equipment was below the LSC value recommended by ISCD. Material and Methods: The bone densities of the lumbar spine and thighs of 30 participants were measured twice, and the LSC values were calculated using the precision calculation tool provided by the ISCD (http://www.iscd.org). To check the reproducibility of the measurement, patients were asked to completely dismount from the equipment after the first measurement; the patient was then repositioned before proceeding with the second measurement. Results: The LSC values derived using the CV% values recommended by the ISCD were 5.3% for the lumbar spine and 5.0% for the thigh. The LSC values measured using our bone density equipment were 2.47% for the lumbar spine and 1.61% for the thigh. The LSC value using RMS-SD was 0.031 g/cm² for the lumbar spine and 0.017 g/cm² for the thigh. Conclusion: that the findings confirm that the CV% value measured using our bone density meter and the LSC value using RMS-SD were maintained very stably. This can be helpful for obtaining accurate measurements during bone density follow-up examinations.

• 한국산업정보학회논문지
• /
• 제17권5호
• /
• pp.37-42
• /
• 2012

오디오 스테가노그래피는 오디오 매체(신호)에 암호화된 비밀 메시지를 은닉하여 전송하는 일반적이고, 폭넓게 이용되는 통신기법이다. 인간은 청각시스템의 지각능력의 한계 때문에 커버 오디오 파일과 스테고 오디오 파일의 지각품질(perceptual quality) 차이는 없다. 또한 공격자로부터의 안전성과 견고성 측면에서 LSB 기법은 디지털화된 오디오 신호에 메시지를 삽입하는 효율적이고, 경제적인 방법으로 널리 이용되고 있다. 이 논문에서는 LSB 기법을 기반으로 하고, 디지털화된 비밀 메시지의 비트별 위치를 변경하고, 암호화한 후 커버 오디오 매체에 은닉하는 개선된 방법을 제시한다.

• 한국도로학회논문집
• /
• 제11권2호
• /
• pp.217-228
• /
• 2009

연속류도로 합류영향구간에서는 본선과 다른 교통특성을 가진 연결로교통류의 합류로 차로변경 및 가감속과 같은 차량간의 불규칙한 상호작용이 발생하여 교통류의 난류현상을 야기한다. 따라서, 난류현상은 운행상태를 고려하여 연속된 지점간의 불안정한 교통특성으로 판단하여야 한다. 본 연구에서는 합류영향구간에 차로-지점별 검지기를 설치하여 시공간적으로 연속된 교통자료를 구축하였으며, 지점간에 유의한 속도변화를 판단하는 기준으로 최소유의차(LSD) 통계값을 산정하여 난류현상을 분석하였다. 분석결과, 합류영향구간 난류현상은 운행상태에 따라 발생권역 및 심각도가 변화되는 것으로 나타났다. 이에 따라 난류현상에 의한 최대 합류영향권역은 교통량이 증가하는 혼잡전 운행상태에서 보여지며, 속도변화특성에 따라 상류 100m$\sim$하류 100m의 "감속구간"과 하류 100m$\sim$하류 400m의 "감속속도유지 및 가속구간"으로 구분할 수 있었다.

• 한국제4기학회지
• /
• 제17권2호
• /
• pp.1-7
• /
• 2003

Environmental changes caused by the abrupt climatic change are one of the important issues in the scientific community. In the East Sea, abrupt climatic shift, called Younger Dryas, is identified. The age of the Younger Dryas cold episode occurred at 11.2 ka. Overall, changes in circulation and bottom water conditions occurred during the Younger Dryas cold episode in the study area. Especially, climatic transition from meltwater spike to the Younger Dryas cold episode is characterized by significant shifts of oxygen isotope values, the coiling ratios of Neogloboquadrina pachyderma, and the planktonic foraminifers abundances. The impact of abrupt climate change on the ecosystem is very significant. In the East Sea, the calcium carbonate secreting organism(foraminifers) is replaced by silicon dioxide secreting organisms(diatom, radiolarian) after the abrupt and severe cold climatic event. Based on the Doctrine of Uniformitarianism, at least climate change for the next 100 years would be severely influence on the marine ecosystem.

• 한국농공학회지
• /
• 제15권2호
• /
• pp.2980-3001
• /
• 1973

Nozzle is a part of sprayer and is consists of several elements; swirl plate, vortexchamber, cap and body. The travelling distance of sprayed particles is important in the wide reach nozzle. The factors to influence the travelling distance of the sprayed particles may be the helical angle of swirl plate, the distance of vortex hamber, the slope and the size of cap hole. The study was conducted to examine the effects of these factors on the travelling distance. The results of this study are summarized as follows; 1) There was higher positive correlation(+0.96) between the maximum travelling distance for which amount of sprayed particles was 5cc/cm min. and centro-position of the travelling distance. 2) There was a higher positive correlation(+0.85) between total discharge of sprayed particles and the centro-position of the travelling distance. 3) Main effects and interaction effects of helical angle, pressure, vortex chamber distance and cap slope were significantly affected the travelling distance of sprayed particles. 4) Main effects of helical angle, pressure and cap slope were especially highly significant to influence the travelling disance. 5) Helical angle, pressure, vortex chamber distance and cap slope influenced spraying forward velocity of dise hole, among which cap slope and pressure of nozzle was the most important factors. 6) Effect of change of helical angle on the travelling distance of sprayed particles, was generally a quadratic, the least value of the distance being showed about $45^{\circ}$ and the largest at about $15^{\circ}\;and\;55^{\circ}$, the decreasing rate of the change between $15^{\circ};and\;25^{\circ}$ was very small. 7) Effect of change of pressure on the travelling distance sprayed particles was generally a linear, the increasing rate of the charge was about 1.68, which was the most effective compared to the change of the other factors. 8) Effect of change of vortex chamber distance on the spraying distance was also generally a linear, the increasing rate being about 0.16, which was the least effective. 9) Effect of change of cap slope on the travelling distance was also generally a linear, the increasing rate was about 0.61 and its effect was about medium.

• Biomolecules & Therapeutics
• /
• 제9권1호
• /
• pp.20-25
• /
• 2001

In this study we fed control diet and tryptophan supplemented diets containing 0.35% tryptophan to ICR mice for 2 weeks. The concentrations of serotonin and 5-HIAA were changed by injection of the serotonin synthesis inhibitor, p-CPA and the serotonin precursor, serotoninP and the change of brain serotonin concentration negatively correlated with that of pain sensitivity, and p-CPA and serotoninP also changed the analgesic effect of morphine. The injection of naloxone, the opiate antagonist, resulted in an increase in the writhing frequency, but its antagonistic effect was not significant. The concentration of 5-HIAA elevated in mice brain at least 3hr after administration of morphine hydroxide indicates that the changes in brain serotonin metabolism may be associated with the acute effects of morphine analgesia. In short, these results not only suggest that tryptophan supplemented diet suppress pain sensitivity in mice, but also indicate that at least in part analgesic mechanism of serotonin may be associated with morphine analgesia.

• 가정과삶의질연구
• /
• 제10권2호
• /
• pp.19-36
• /
• 1992

The purpose of this paper is to analyze empirically the tendency of household consumption expenditure according to the change of social and economical condition, and the factor which influences consumption expenditure of urban household. The data used in analysis are time-series. The data are statistic form Urban Household Economy Survey published by the Economic Planning Board, dating form the first quarter of 1970 to the fourth quarter of 1989. The income of household and consumption expenditure materials were deflated as consumer price index to exclude the influence of prices and the influence of household composition are considered to deflated as the size of the household under assumption of homogeneity. The consumption expenditure items were categorized to 12 relatively large range items. The time-series data were analyzed by using the Two Stage Least Squares and the Ordinary Least Squares. The following is the result of analysis. 1) Rather than the income increase of previous years. the average income increase for two years influences more significantly on consumption expenditure of household. In the case of influence on consumption expenditure for each item by increase in disposable income, such categories as furniture and utensils. clothing and footwear, housing, medical care, culture and recreation, and transportation and communication have significant influence. 2) Among consumption expenditure categories, the increasing factors were furniture and utensils, and clothing and footwear. And the decreasing factors were housing, medical care, culture and recreation ,and transportation and communication. The relative prices, however, had significant influence on categories such as housing, furniture and utensils, medical care , culture and recreation, and transportation and communication and all of them were the decreation factors. 3) Among with changes of social and economical conditions, miscellaneous showed the highest increase in marginal propensity to consume and foods was the lowest. Also culture and recreation and housing brought up a great change of the income elasticity of demand.

• The Journal of Advanced Prosthodontics
• /
• 제15권3호
• /
• pp.114-125
• /
• 2023

PURPOSE. The aim of the study was to evaluate the optical properties of new generation (3Y-TZP) monolithic zirconia (MZ) with different abutment types and resin cement shades. MATERIALS AND METHODS. A1/LT MZ specimens were prepared (10 × 12 × 1 mm, N = 30) and divided into 3 groups according to cement shades as transparent (Tr), yellow (Y) and opaque (O). Abutment specimens were obtained from 4 different materials including zirconia (Group Z), hybrid (Group H), titanium (Group T) and anodized yellow titanium (Group AT). MZ and abutment specimens were then cemented. L^*, a^*, and b^* parameters were obtained from MZ, MZ + abutment, and MZ + abutment + cement. ∆E₀₀₁^* (between MZ and MZ + abutment), ∆E₀₀₂^* (between MZ and MZ + abutment + cement) and ∆E₀₀₃^* (between MZ + abutment and MZ + abutment + cement) values were calculated. Statistical analyses included 2-way ANOVA, Bonferroni, and Paired Sample t-Tests (P < .05). RESULTS. Abutment types and resin cements had significant effect on L^*, a^*, b^*, ∆E₀₀₁^*, ∆E₀₀₂^*, and ∆E₀₀₃^* values (P < .001). Without cementation, whereas zirconia abutment resulted in the least discoloration (∆E₀₀₁^* = 0.68), titanium abutment caused the most discoloration (∆E₀₀₁^* = 4.99). The least ∆E₀₀₂^* = 0.68 value was seen using zirconia abutment after cementation with yellow shaded cement. Opaque shaded cement caused the most color change (∆E₀₀₃^* = 5.24). Cement application increased the L^* values in all groups. CONCLUSION. The least color change with/without cement was observed in crown configurations created with zirconia abutments. Zirconia and hybrid abutments produced significantly lower ∆E₀₀₂^* and ∆E₀₀₃^* values in combination with yellow shaded cement. The usage of opaque shaded cement in titanium/anodized titanium groups may enable the clinically unacceptable ∆E₀₀^* value to reach the acceptable level.

• 보건교육건강증진학회지
• /
• 제13권2호
• /
• pp.167-183
• /
• 1996

Human teeth vary widely in color. Practitioner and patients are concerned with preventing and correcting discolored or dark teeth to achieve and maintain stain-free, white teeth. Tooth brushing cannot alter tooth color but it can remove adhering films and stains. The esthetics of natural dentition can be improved by bleaching and this process can be applied to intrinsically and extrinsically stained teeth. The need for a brighter, more attractive smile has made rapid growth in the market for tooth whiteners. There is no doubt these products work as whiteners, at least on mild to moderate stains, but the safety of these products are unclear. In this experiment, the effect of tooth whitener application on the color and microhardness of extracted human enamel was measured. RMS, RMT and NWT were used as tooth whiteners, and tooth paste(ETQ) and hydrogen peroxide solution(HPO) were used as controls. 35 caries-free extracted human molars were embedded and polished with the exposed enamel diameter of 4 mm. The tooth whiteners and control agents were applied according to the manufacturers' instructions or clinically simulated procedures for eight weeks, and measurements were repeated every two weeks. Value(L＊) difference was measured using Differential Colorimeter(Model TC-6FX, Denshoku Co., Japan), and microhardness was measured using microhardness tester(Mitsuzawa Seiki Co., Japan). The results were as follows; 1. After application of agents for eight weeks, the Vickers hardness increased significantly in the ETQ, RMS and RMT application group(p〈0.01), and that decreased significantly in NWT application group(p〈0.01), but in HPO application group there was no significant change. The change in microhardness was greatest in NWT application group(p〈0.01). 2. After application of tooth whiteners and controls for eight weeks, the value change of toothpaste application group was significantly lower than those of other agents groups(p〈0.01), and there was no significant difference in value(L＊) change among tooth whitener groups(p〉0.01). 3. The application of tooth paste and paste type tooth whitener made gradual value change, but hydrogen peroxide gel type tooth whitener and hydrogen peroxide solution made rapid value change during initial application period.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권3호
• /
• pp.217-227
• /
• 1992

The purpose of this paper is to investigate changes in soft tissue in 22 patients treated by vertical ramus osteotomy and sagittal split ramus osteotomy for the correction of mandibular prognathism. 22 individuals, 12 males and 10 females, were selected from the patients with mandibular prognathism at the Department of Oral and Maxillofacial Surgery, Colledge of Dentistry, Kyung Hee University. Patient were analyzed with cephalogram taken 1 week before and at least 6 weeks after surgery under the same condition. Measurements were made constructed hard tissue and sop tissue points located on each before-and-after film tracing. Comparision were made of these figures to estimate the amount that the soft tissue followed the hard tissue structures in each surgical procedure : ratio of sop and hard tissue changes were formulated. The results were as follows. 1. The horizontal changes of Pogs and Bs as a ratio of the horizontal changes of Pog and B point were 1.02 and 1.16 respectively. 2. One millimeter of posterior changes at Pog resulted in 0.86mm of posterior change at Li and 0.09mm of posterior change at Ls. The greatest amount of sop tissue change occurred at Pogs, with substantially less posterior displacement at Bs, even less at Li and at least at Ls. 3. The ratio of LI to Li was 1:0.81 and the ratio of LI to Ls was not significant.(1 : 0.17) 4. The ULA(Cm-Sn-Ls) and the relative lower lip projection (LLP) was incnease4 but the relative upper lip projection (ULP) was slightly decreased 5. The angular change of the upper lip inclined angle (Ls-Sn/ANS-PNS) and lower lip inclined angle(Li-Pogs/Me-Go) expressed as a ratio of the posterior change of Pog were 0.57 and 0.20 respectively. 6. The ratio of the lower anterior facial height change of the soft tissue(Sn-Mes) to the hard tissue(ANS-Gn) were 0.78 and and the ratio of vertical height changes of the hard tissue and sop tissue to the posterior change of the Pog were 0.18 and 0.19 respectively. 7. The sop tissue angular change of facial convexity(G-Sn-Pogs) expressed as a ratio of the angular change of the hard tissue angle of facial convexity(N-A-Pog) was 1.24.