• Tribology and Lubricants
• /
• 제30권5호
• /
• pp.303-310
• /
• 2014

In order to reduce friction and improve reliability, researchers have applied various surface texturing methods to highly sliding machine elements such as mechanical seals and piston rings. Despite extensive theoretical research on surface texturing, previous numerical results are only applicable to isothermal and iso-viscous conditions. Because the lubricant flow pattern of textured bearing surfaces is much more complicated than that for non-textured bearings, the Navier?Stokes equation is more suitable than the Reynolds equation for the former. This study carries out a thermohydrodynamic (THD) lubrication analysis to investigate the lubrication characteristics of a single micro-dimpled parallel thrust bearing cell. The analysis involves using the continuity, Navier?Stokes, energy, temperature?viscosity relation, and heat conduction equations with the commercial computational fluid dynamics (CFD) code FLUENT. This study discretizes these equations using the finite volume method and solves them using the SIMPLE algorithm. The results include finding the streamlines, pressure and temperature distributions, and variations in the friction force and leakage for various dimple radii and depths. Increasing the dimple radius and decreasing the depth causes a recirculation flow to form because of a strong vortex, and the oil temperature greatly increases compared with the non-textured case. The present numerical scheme and results are applicable to THD analysis of various surface-textured sliding bearings and can lead to further study.

• 한국화재소방학회논문지
• /
• 제18권3호
• /
• pp.57-73
• /
• 2004

Pilot LNG Tank에서 LNG가 누출되어 화재가 발생할 경우의 정량적 안전성 평가를 고장수목법을 이용하여 4가지 형태의 주요 시나리오를 도출하고 이에 대한 분석을 수행하였다. 첫째 방출관에서 누출할 경우에 특정 Low Flammable Limit(LFL)반경은 형성하지 않았으며, 둘째는 탱크파손으로 인한 LNG 유출이라는 최악의 시나리오 분석을 수행하였고, 그 결과를 살펴보면 총 누출량이 같더라도 시간에 따라 여러 가지 확산범위가 나타남을 확인할 수 있었다. 셋째는 inlet/outlet파이프의 손상으로 인한 누출로 10달과 타분 두 경우에 대해 분석하였으나, 각각의 경우 LFL의 반경은 큰 차이를 보이지 않았다. 따라서, 이와 같은 LNG누출 사고의 경우 초기 방출량의 크기가 확산의 주요 인자임을 알 수 있었다. 넷째는 방류둑에서 LNG배관이 파손될 경우 LFL의 크기를 산출하였다. 한편 복사열 및 불꽃의 크기에 대한 피해결과 분석을 동시에 수행하였다.

• 환경영향평가
• /
• 제22권5호
• /
• pp.439-454
• /
• 2013

UN-REDD (United Nations programme on Reducing Emissions from Deforestation and forest Degradation) is currently being emerged as one of important mechanism to reduce carbon dioxide in relation to the deforestation. Although administrative boundary has already gained world-wide recognition as a typical method of monitoring unit in the process of GHG (Greenhouse Gas) reduction project, this approach did not provide a realistic evidence in the carbon sequestering monitoring in terms of UN-REDD; the meaningful comparison of land use patterns among watershed boundaries, interpretation for distribution trends of carbon density, calculation of opportunity cost, leakage management, etc. This research proposes a comparative evaluation framework in a more objective and quantitative way for carbon sequestering monitoring between administrative and watershed boundary approaches. Mt. Geumgang of North Korea was selected as a survey objective and an exhaustive and realistic comparison of carbon sequestration between the two approaches was conducted, based on change detection using TM satellite images. It was possible for drainage boundary approach to identify more detailed area-wide patterns of carbon distribution than traditional administrative one, such as estimations of state and trends, including historical trends, of land use / land cover and carbon density in the Mt. Geumgang. The distinctive changing trends in terms of carbon sequestration were specifically identified over the watershed boundary from 4.0% to 34.8% while less than 1% difference was observed in the administrative boundaries, which were resulting in almost 21-22%. It is anticipated that this research output could be used as a valuable reference to support more scientific and objective decision-making in introducing watershed boundary as carbon sequestering monitoring unit.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권6호
• /
• pp.477-482
• /
• 2019

Recently, due to the increased use of medical radiation, the radiation exposure of radiation workers should be considered as well as medical exposure of patients. And it is recommended to close the door during radiography. however, In this study, when the door was inevitably opened for radiography, the proposed method was to install the shield as a method of reducing the exposure dose. And its efficiency was analyzed. In simple chest radiography, the measurement point was changed according to the measurement location. Dose rate were measured 10 times for each condition using a dosimeter. And the average value was derived. Using this, the change of dose according to the opening and closing of the door and the installation of the shield was analyzed. Using this, we compared and analyzed the dose change according to the door opening and closing and the installation of the shield, and significance was verified through the SPSS ver. 24. Depending on whether the door was opened or closed, 11,215.35%, 159.0%, 101.9% increased in front of the door in the consol room, behind the wall and behind the lead glass. Depending on the installing of the shield, the 49.2%, 29.6%, 19.9%, 30.6% decrease in front of the door in the examination and consol room, behind the wall and lead glass. In addition, statistical analysis was showed that there were significant differences in both the results according to whether the door was opened or closed and shielding(p<.05). Close the door during radiography. However, when the door should be opened, it was confirmed that the dose rate were reduced by installing the shield. Therefore, to optimize radiation protection, it is recommended to install shields when opening the door.

• 한국임상수의학회지
• /
• 제29권1호
• /
• pp.87-92
• /
• 2012

A six months old, male Shih Tzu dog was referred to the Veterinary Medical Teaching Hospital at Kangwon National University, for lethargy, respiratory embarrassment. Survey radiography revealed enlarged cardiac silhouette due to displacement of gas-filled intestine in the pericardium. Although there were no specific clinical signs, this case was diagnosed as peritoneopericardial diaphragmatic hernia (PPDH) based on the results of positive contrast radiography and thoracic ultrasonograpic findings. In addition, the thickened gall bladder wall observed in ultrasonography, increase of alkaline phosphatase and neutrophils indicated cholecystitis. Two hepatic lobes and gall bladder were severely necrotized and adhere to the diaphragm. Direct reduction of the herniated organs might cause hepatic hemorrhage and bile juice leakage which may induce very poor prognosis. To solve the problems, the adhered organs were dissected with part of diaphragm, and lobectomy with cholecystectomy was performed for prevention of some possible complications including peritonitis. This is case report describing resection of part of diaphragm adhered to herniated organ reduce the risk of possible hepatic hemorrhage during surgical correction of PPDH followed bycholecystectomy and lobectomy.

• Journal of Chest Surgery
• /
• 제32권1호
• /
• pp.10-15
• /
• 1999

배경: 건삭보존 승모판 치환술이 승모판 폐쇄부전증에 있어서는 좌심실 기능의 개선 및 술후 합병증을 줄일 수 있다고 알려져 있으나 승모판 협착증에 있어서는 좌심실 유출로의 폐쇄나 기계판엽의 운동장애 없이 적당한 크기의 기계판막을 삽입할 수 없다는 점등으로 아직 논란의 대상이 되고 있다. 대상 및 방법: 본원에서는 5명의 승모판 협착증환자와 7명의 승모판 폐쇄부전증 환자를 대상으로, 융합된 교련의 절개, 두꺼워진 판첨을 얇게 박리하고, 전판첨을 전판륜으로부터 2 mm 정도에 절개를 가하고 전판첨 중앙부를 절제하여 판엽을 두 개의 분절로 분리하여 교련부에 재 부착함으로써 건삭 및 판첨을 판륜에 위치이동 하면서 승모판막 치환술을 시행하여 건삭 및 판륜의 연속성을 유지하였다. 결과: 술후 기계판엽의 운동장애나 판막주위누출, 좌심실 유출로의 폐쇄 등 합병증 및 수술 사망환자는 없었다. 결론: 결론적으로 건삭보존 승모판 치환술이 승모판 협착증에 있어서도 안전하고 효과적인 수술방법이라 할 수 있다

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권4호
• /
• pp.92-98
• /
• 2014

본 연구는 환경부하 저감을 위해 슬래그 시멘트를 사용하고 플라스틱 섬유보강재(폴리프로필렌, 나일론, 유리섬유)를 혼입하여 고강도 간격재를 개발하고 현장적용성을 평가하는 연구이다. 이를 위해 예비실험을 통하여 4가지 섬유 복합재의 첨가량이 결정되었다. 또한 역학적 시험(압축, 휨, 인장) 및 내구성 시험(흡수율, 투수율, 길이변화율, 균열저항성, 탄산화, 동결융해)을 통하여 최적의 섬유재를 도출하였으며, 이를 이용한 고강도 섬유재 간격재의 배합 및 생산시스템을 개발하였다. 또한 현장적용성 평가를 통하여 개발된 간격재의 구체 콘크리트 일체성을 확인하였다.

• 한국식품과학회지
• /
• 제22권7호
• /
• pp.812-816
• /
• 1990

쏠비톨 생산을 위해서 Zymomonas mobilis의 Cell wall 투과성을 높인 후 alginate에 고정화 하였다. 투과성을 높이는데 toluene이 가장 효과적인 것으로 나타났으나, 3회의 회분공정을 행한 바 glucose-fructose oxidoreductase의 유출, 손실로 인하며 쏠비톨 생산이 급격히 저하되었다. 효소의 활성도를 장시간 유지하기 위하여 투과성을 높인 cell을 상온에서 1시간 동안 0.25%(v/v)의 glutaraldehyde로 처리한 후 alginate에 고정화 하여 연속공정을 행하였을 때 210시간 동안 높은 전환효율(82%)을 보였으며, 희석비율 $0.18\;h^{-1}$에서 $7.2{\sim}7.5\;g/l-h$의 쏠비톨 productivity를 얻었다. 이는 glutaraldehyde로 처리하지 않고 alginate에 cell을 고정화하였을 때에 비해서 효소의 안정성이 아주 높은 것으로 나타났다.

• Journal of Ecology and Environment
• /
• 제29권5호
• /
• pp.479-484
• /
• 2006

Ecophysiological parameters of non-transgenic sweetpotato (NT) and transgenic sweetpotato (SSA) plants were compared to evaluate their resistance to multiple environmental stresses. Stomatal conductance and transpiration rate in NT plants decreased markedly from Day 6 after water was withheld, whereas those values in SSA plants showed relatively higher level during this period. Osmotic potential in SSA plants was reduced more negatively as leaf water potential decreased from Day 8 after dehydration treatment, while such reduction was not shown in NT plants under water stressed condition. SSA plants showed less membrane damage than in NT plants. As water stress and high light stress, were synchronously applied to NT and SSA plants maximal photochemical efficiency of PS II ($F_v/F_m$) in NT plants markedly decreased, while that in SSA plants was maintained relatively higher level. This trend of changes in $F_v/F_m$ between SSA plants and NT plants was more conspicuous as simultaneously treated with water stress, high light and high temperature stress. These results indicate that SSA plants are more resistive than NT plants to multiple environmental stresses and the enhanced resistive characteristics in SSA plants are based on osmotic adjustment under water stress condition and tolerance of membrane.

• 한국전자파학회논문지
• /
• 제11권1호
• /
• pp.84-92
• /
• 2000

2.4 GHz 대역 WLL 단말기용 GaAs MESFET MMIC 송신기를 설계하고 제작하였다. 설계된 송신기는 이중 평형 능동형 혼합기와 전압 부궤환 구조를 갖는 2단 구동증폭기로 구성하였다. 특히, 한 쌍의 소스 접지-게이트 접지(Common-Source. Common -Gate: CSCG) 구조를 사용하여 IF 입력 선호의 비대칭성으로 인한 동작영역 감소를 보상하였다. 또한 MESFET의 단자간 위상 특성을 이용하여 국부 발진기(La) 신호의 누설 전력을 억제 하였다. 제작된 칩의 크기는 $0.75\times1.75 mm^2$이었고 측정 결과 2.7 V. 55.2 mA에서 386 dB의 변환이득. 11.6 dBm 의 출력$P_{idB}$ 구동증폭기의 RF 출력 -5dBm에서 - 31.5 dBc의 IMD3의 특성을 얻었다. 따라서 제작된 송신기는 WLL 단말기에 적용 가능하다.