• 한국자기학회지
• /
• 제22권2호
• /
• pp.49-57
• /
• 2012

MFL PIG는 배관의 단면적이 변화할 때 발생하는 누설 자기장을 검출하고, 검출 된 누설 자속 신호의 분포 및 크기를 이용하여 배관 내 외벽에 결함의 발생 유무를 검사하는 방법이다. 기존의 MFL PIG는 금속 손실이나 균열, 부식과 같은 결함을 검출하는데 효과적이었으나 배관 내 외부의 압력차로 인하여 발생하는 가로축 방향의 가늘고 긴 미소결함을 검출하기 위하여 원주 방향으로 자기장 누설을 최대화 할 수 있는 CMFL(Circumferencial MFL) PIG의 개발이 필요하다. 본 논문에서는 자계 해석 기법 및 3차원 비선형 유한요소법을 이용하여 CMFL PIG를 설계하고 배관의 결함 유무에 따른 누설 자계 분포를 분석하였다. 또한 CMFL PIG와 함께 결함 검출 성능 검증을 위한 모의시험 배관과 결함 및 고정 구조물을 제작하고, 이를 이용한 실험으로 누설 자계 신호를 측정하여 결함의 형상변화가 검출 신호에 미치는 영향을 비교 및 검토하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1999년도 춘계연구발표회 논문개요집
• /
• pp.46-47
• /
• 1999

• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.96-101
• /
• 2013

• 비파괴검사학회지
• /
• 제36권6호
• /
• pp.510-516
• /
• 2016

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1999년도 추계연구발표회 논문개요집
• /
• pp.90-91
• /
• 1999

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.81-84
• /
• 1999

The purpose of this paper is to find the magnetic field distribution inside the motor in order to find out if the high-Tc superconducting tapes operate stably in actual motor operation. With this gola, magnetic field distribution in a detailed model of the actual motor was analyzed through F.E.M. (Finite Element Method). As a result, it has been proved that the high-Tc superconducting tapes can withstand 4 A of current with stability. 4 A was the amount of current needed to achieve 600 A ·turns which is required by the previous simulation aimed at developing this motor. Also, it has been observed that the flux damper reduces armature reactance during the motor operation and during load changes, helping the stable motor operation. But, it was observed that the flux damper generates loss by means of leakage flux and this decreases the output of the motor by about 5%.

• 한국자기학회지
• /
• 제13권2호
• /
• pp.70-75
• /
• 2003

비선형 자기이방성 물질을 이용하여 3차원 유한요소법으로 강자성 배관 벽에 형성된 결함 근처에서 누설되는 자속에 미치는 부피인장응력(bulk tensile stress) 및 수직 응력의 영향을 계산할 수 있다. 배관의 외$.$내부 벽의 racetrack형 결함(racetrack pit) 깊이와 계산된 부피응력 (bulk stress)이 축(x) 방향, 원주(y) 방향 및 방사상(z) 방향의 누설자속에 미치는 영향을 계산하였다. 그 결과 배관의 축 및 방사상 방향의 MFL 신호는 배관 외$.$내부 면의 racetrack 결함깊이와 부피인장응력에 의해 영향을 받으며, 결함의 깊이가 깊어질수록 부피인장응력이 커질수록 MFL 신호는 증가하였다. 그러나 원주 방향의 MFL 신호는 결함깊이와 부피인장응력에 거의 영향을 받지 않았다.

• 융복합기술연구소 논문집
• /
• 제5권2호
• /
• pp.7-12
• /
• 2015

A novel topology for the magnet gear is proposed in this study. Differently from the existing methods, both sides of magnet array in this topology are used, resulting in increasing the efficiency of the mechanism. The closed magnetic path between the magnetic elements decreases the leakage flux, so the interlinking magnetic flux through the air-gap is focused and intensified. This paper discusses the dominant parameters of the proposed magnet gear influencing the resulting transmission torque. The parameters are designed from the sensitivity analysis using the commercial FEM analysis tool. And, the test setup for verifying the performance of the system is described.

• 전기의세계
• /
• 제22권3호
• /
• pp.25-34
• /
• 1973

In this paper, the characteristics of a single phase induction motor which is considered the space harmonic flux by the double revolving field theory is analysed. As the rotor resistance for the fundamental flux is separated from the resistance for the rotor bar and end-ring, and the rotor leakage reactnace is separated from the skew leakage reactance and the other, so the circuit constants for the space harmonic flux is expressed by the circuit constants for the fundamentals. As the ratio of the circuit constants for the magnetizing reactance is used, the generalized equivalent circuit is made up. the characteristic equation which is able to analysis the subdivided characteristics by the above circuit is induced. The ratio of the circuit constants and the skew angle being changed, the variations of the torque-speed characteristics for the fundamentals and harmonics is examined by this equation.

• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.727-735
• /
• 2021

Recently, non-destructive health monitoring methods such as magnetic flux leakage (MFL) method, have become popular due to their advantages over destructive methods. Currently, numerical study on this field has been limited to simplified studies by only obtaining MFL instead of induced voltage inside coil sensor. In this study, it was proposed to perform a novel numerical simulation of MFL's coil sensor by considering vital parameters including specimen's motion with constant velocity and saturation status of specimen in time domain. A steel-rod specimen with two stepwise cross-sectional changes (i.e., 21% and 16%) was fabricated using low carbon steel. In order to evaluate the results of numerical simulation, an experimental test was also conducted using a magnetic probe, with same size specimen and test parameters, exclusively. According to comparative results of numerical simulation and experimental test, similar signal amplitude and signal pattern were observed. Thus, proposed numerical simulation method can be used as a reliable source to check efficiency of sensor probe when different size specimens with different defects should be inspected.