• 제목/요약/키워드: Leak Location Estimation

검색결과 6건 처리시간 0.027초

지하매설 플라스틱 배관의 누수지점 추정을 위한 창함수 비교 연구 (Comparison of Window Functions for the Estimation of Leak Location for Underground Plastic Pipes)

  • 이영섭
    • 한국소음진동공학회논문집
    • /
    • 제20권6호
    • /
    • pp.568-576
    • /
    • 2010
  • It is widely known that the leak locating of underground plastic pipelines is much more difficult than that of cast iron pipelines. The precision of the leak locating depends upon the speed of leak signal and the time delay estimation between the two sensors on the pipeline. In this paper, six different windowing filters are considered to improve the time delay estimation especially for the plastic pipelines. The time delay is usually estimated from the peak time of cross-correlation functions. The filtering windows including rectangle, Roth, Wiener, SCOT, PHAT and maximum likelihood are applied to derive the generalized cross-correlation function and compared each other. Experimental results for the actual plastic underground water supply pipeline show that the introduction of the filtering windows improved the precision of time delay estimation. Some window functions provide excellent leak locating capability for the plastic pipe of 98 m long, which is less than 1 % of the pipe lengths. Also a new probabilistic approach that the combinations of all results from each filtering window is suggested for the better leak locating.

누설영역 분석을 이용한 배관 증기누설 위치 추정 방법 (Location Estimation Method of Steam Leak in Pipelines Using Leakage Area Analysis)

  • 김세오;전형섭;손기성;박종원
    • 비파괴검사학회지
    • /
    • 제36권5호
    • /
    • pp.384-390
    • /
    • 2016
  • 플랜트 배관의 누설감시 시스템은 누설 유무 판단뿐만 아니라 누설의 위치를 신속히 파악하는 것 또한 매우 중요하다. 플랜트 배관의 누설 검출 방법에는 주로 AE(acoustic emission)센서, 마이크로폰어레이 그리고 카메라 영상을 이용한 방법들이 있다. 최근 광역감시 및 원거리감시의 이점이 있는 카메라 영상을 이용한 방법에 대한 연구가 진행되어 왔다. 하지만 기존 카메라 영상을 이용한 방법들은 누설 유무와 대략적인 누설의 위치를 판단하고 있으나 누설이 시작되는 정확한 위치 추정에 대한 연구는 아직 미흡한 상태이다. 따라서 본 논문에서는 카메라를 이용한 누설 검출 방법을 이용해 누설영역을 산출하고 누설 검출 결과를 분석하여 누설 위치를 추정하는 방법을 제안하였으며 실험을 통하여 성능을 평가하였다.

시간지연 추정을 통한 누수위치 식별 연구 (Time Delay Estimation for the Identification of Leak Location)

  • 이영섭;윤동진;김치엽
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.327-332
    • /
    • 2004
  • Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband noise from a leak location and can be propagated to both directions of water pipes. This sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than loom.

  • PDF

주파수 대역 변화를 이용한 배관의 누수지점 추정 개선 연구 (Improved Estimation of Leak Location of Pipelines Using Frequency Band Variation)

  • 이영섭;윤동진
    • 비파괴검사학회지
    • /
    • 제34권1호
    • /
    • pp.44-52
    • /
    • 2014
  • 스마트워터그리드 시스템의 지하 상수도 배관 관리에 있어서 누수는 중요한 요소인데, 특히 그 배관이 낡았고 인구가 많은 도시의 포장도로나 다양한 건축물의 아래에 매설된 경우이다. 이러한 누수지점의 정확한 탐지는 이들 배관의 효율적인 운용을 위해 필수적이기 때문에, 주파수 대역 변화, 창 필터 그리고 확률에 바탕한 새로운 누수지점 탐지 방법론을 본 논문을 통해 제안한다. 정확한 누수지점의 추정은 누수음에 의한 센서 신호간의 시간 지연 추정의 정확성에 따라 결정된다는 것이 알려져 있기 때문에 중요한 주파수에 가중치를 부여하는 몇 가지의 창 함수들이 개선된 상호상관함수를 계산하기 위해 적용되었다. 실제 주철로 제작된 길이 253.9 m의 지하매설 상수도 배관에 대해 새로운 방법론을 적용한 실험결과는 향상된 누수지점 탐지 성능을 보여 주었다.

상수도관의 누수신호 특성 및 누수지점 추정에 관한 연구 (The leak signal characteristics and estimation of the leak location on water pipeline)

  • 박상봉;김기범;서지원;김주언;구자용
    • 상하수도학회지
    • /
    • 제32권5호
    • /
    • pp.461-470
    • /
    • 2018
  • In this study, the leak signal was measured by using an accelerometer to analyze the basic data and methodology for the development of the leak point estimation method in the water supply pipe. The measured results were analyzed by frequency analysis and cross-correlation analysis for leakage signals, and the error range was compared and analyzed with the actual leak point distance. As a result, it was confirmed that the vibration intensity due to leakage from the water leakage point was attenuated according to the distance. In the case of the ductile iron casting used in the experiment, the intensity of the signal at the 945 Hz, 1,500 Hz, 2,300 Hz band was increased with the change of the pressure in the pipe at 4mm of leakage hole. Also, it was confirmed that as the water pressure increases, the intensity of the leak signal increases but the similarity of the signal decreases. The results of this study confirm that the accelerometer sensor can be used efficiently for leak detection and it can be used as a basic data for the analysis for the development of leak point estimation method in the future.

시간영역반사계를 이용한 해수배관시스템의 누수 탐지용 센서 개발 연구 (Development of TDR-based Water Leak Detection Sensor for Seawater Pipeline of Ship)

  • 황현규;신동호;김헌희;이정형
    • 해양환경안전학회지
    • /
    • 제28권6호
    • /
    • pp.1044-1053
    • /
    • 2022
  • 시간영역반사계(TDR)는 케이블의 물리적 결함을 검사하는 기법이며 누수 탐지 분야로의 응용영역을 확대하고 있다. 본 연구는 시간영역반사계 기법을 활용하여 선박 기관실 해수 배관의 누설 감지용 케이블형 센서를 개발하였다. 케이블 센서의 형상은 꼬임형상과 흡습부재를 이용하여 제작하였으며 개발된 센서의 누수 감지 여부와 위치 탐지 가능성을 확인하였다. 개발된 센서는 실제 배관 시험 장치에 부착하여 평가하였으며 해수 누설에 따른 다양한 TDR 신호를 취득하였다. 센서는 꼬임횟수, 피복 두께를 변수로 하여 제작하였으며 TDR 신호에 미치는 효과를 분석하였다. 실험 결과, 꼬임형 센서는 평행한 띠 형상의 센서에 비해 평활한 신호 취득이 가능하였으며 최적 꼬임 횟수는 단위길이 당 10회 이상인 것으로 나타났다. 절연 피복두께의 경우 적정 민감도 확보가 가능한 절연 피복부재의 두께는 도선직경의 80%~120%로 확인되었다. 누수 위치 추정을 위해 회귀분석 실시 결과, 결정계수는 0.9998로 실제 누설 위치와 높은 상관관계를 나타내었다. 결과적으로 제안된 TDR 기반의 누수 감지용 꼬임형 센서는 해수 배관 시스템의 누수 감시 센서로의 충분한 적용성을 확인하였다.