• Research in Plant Disease
• /
• v.22 no.2
• /
• pp.72-80
• /
• 2016

Gummy stem blight, caused by the fungus Didymella bryoniae, is major disease of watermelons worldwide. The objective of the present study was to establish an efficient screening system to identify watermelon resistant to D. bryoniae. An GSB3 isolate was prepared from a watermelon plant showing typical symptoms of gummy stem blight in Haman-gun and identified as D. bryoniae based on molecular analysis of internal transcribed spacer sequence. A simple mass-production technique of inoculum was developed based on spore production of D. bryoniae GSB3 under several incubation conditions and their virulence on watermelon plants. Resistance degrees of 22 commercial watermelon cultivars to the GSB3 isolate were evaluated. Among them, four watermelon cultivars showing different degree of resistance response were selected for further study. Development of disease on the cultivars according to various conditions including inoculum concentrations, incubation periods in dew chamber, and incubation temperatures was investigated. From the results, we suggest an efficient screening method for resistant watermelon cultivars to gummy stem blight. Seeds of watermelon cultivar are sown and grown in a greenhouse until plant stage of 2-fully expanded leaves. Seedlings are inoculated with D. bryoniae by spraying spore suspension of the fungus at a concentration of $5.0{\times}10^5spores/ml$. The infected plants are incubated in humidity chamber at $25^{\circ}C$ for 48 hours and then transferred to a growth chamber at $25^{\circ}C$ and 80% relative humidity with 12-hour light a day. Three to four days after inoculation, disease severity of the plant are measured using percentage of infected leaf area.

• Korean Journal of Environmental Agriculture
• /
• v.8 no.2
• /
• pp.128-135
• /
• 1989

To find the effects of solar energy into the rice canopy and its balance on the rice plant growth, a Tongil type rice, Raekyeong and a japonica rice, Koganebare were used with four levels of nitrogen fertilizer application, 6, 10, 14, and 18kg $l0a^{-1}$ in Chigugo, Japan. The micrometerosological data, the solar radiation and absorbed solar radiation by the rice plants, and leaf area index on cardinal growth stage of the rice community were measured. The results are as follows : Raekyeong showed increased LAI by increased nitrogen fertilizer application rates, and larger LAI than Koganebear. 1. There was no difference in total dry weight till 20 days after transplanting regardless of nitrogen levels in the same variety, after that, however, Raekyeong showed higher dry matter productions for the same durations than Koganebare. 2. In early growth stage of transplanting rice, reflection ratio of solar radiation above the crop canogy was about 6%, however, it was increased up to 20% by the increased LAI at heading date. 3. In high levels of nitrogen application plots, LAI were increased so that values were decreased. 4. Relationship between the amount of absorbed radiation by plants and its dry matter production was linearly significant. Higher levels of nitrogen application produced higher dry matter in Raekyeong, however, in lower level, the dry matter production pattern was almost similar between both rice cultivars.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.1
• /
• pp.50-58
• /
• 1992

Studies were conducted to determine the combined effect of uniconazole [(E) -1-(4-chlorophenyl)-4, 4-demethyl 2-(1,2,4 triazol-1-yl)-1-penten-3-ol] and silver thiosulfate $[Ag {(S_2O_3)}^3\;_2-]$ (STS) on reduction of ozone injury in tomato plants(Lycopersicon esculentum Mill. 'Pink Glory'). Plants were given a 50ml soil drench of uniconazole at concentrations of 0, 0.001, 0.01 and 0.1 mg/pot at the stage of emerging 4th leaf. Two days prior to ozone fumigation, STS solution contained 0.05% Tween-20 was also sprayed at concentrations of 0, 0.3 and 0.6 mM. Uniconazole at 0.01 mg/pot and STS at 0.6 mM were effective in providing protection against ozone exposure(20h at 0.2ppm) without severe retardation of plant height and chemical phytotoxicity, respectively. Combined treatment with uniconazole, STS significantly reduced ozone injury at the lower concentration than a single treatment with uniconazole or STS. Uniconazole treatment reduced plant height, stem elongation and transpiration rate on a whole plant level and increased chlorophyll concentration. STS did not give any effect on plant growth and chlorophyll content but increased transpiration rate in non-ozone-fumigated plants. Ethylene production in the leaves of ozone-fumigated plants was decreased by uniconazole and STS pretreatment, but there was no protective effect on epinasty of leaves in uniconazole-treated plants. STS increased ethylene production in non-ozone-fumigated plants, but it significantly reduced the degree of epinasty and defoliation of cotyledons when plants were exposed to ozone. Uniconazole slightly increased superoxide dismutase and peroxidase activities. But STS showed little or no effects on such free radical scavengers. Day of flowering after seeding was shortened and percentages of fruit set were increased by uniconazole treatment. STS was highly effective on protecting reduction of fruit set resulting from ozone fumigation. These results suggest that combined use of uniconazole and STS should provide miximum protection against ozone injury without growth retardation resulting in yield loss.

• Asian Journal of Turfgrass Science
• /
• v.15 no.2
• /
• pp.65-76
• /
• 2001

This study was designed to estimate on the interaction of the first productivity, light condition and to examine the ecophysiological characteristics of Zoysia japonica. rtificial community of Zoysia japonica was analyzed effect of matter production and growth construction under various shading condition. The results summarized this experiment were as follows; 1. The relative growth rate (RGR) in all experimental plots was high during the growth stage of 20 days after transplanting, and then decreased. The maxium RGR value appeared in the control plot (2.13g/g. 10days) during the growth stage from 10 to 20 days after transplating. RGR value in server shading of short day condition was remarkably decreased from the early growth stage. The main factor to lower RGR value considered as a short day condition than that of shading. 2. The net assimilation rate (NAR) in all experimental plots except 3hour photoperiod plot was high during the early growth stage after transplanting, and then decreased early growth stage after transplanting, and then decreased as the growth proceeded. The maxium value appeared in the control plot (35g/g. 10days). NAR value in the severe shading of short day condition plots was low. Especially, NAR value in the three hours photoperiod plot was remarkably low from the early growth, there was no great difference by growth stage. NAR had negative correlation with LAI and positive correlation with RGR. 3. The increasing rate of leaf area ratio(LAR) was high during the early growth stage after transplanting in the control plot and in the photoperiod plot, the shorter the exposure time to sunlight, the higher the LAR value from the early growth stage. Especially, its value in the 3 hour photoperiod plot was remarkably high but its increasing rate was lower as the growth proceeded. LAR hade negative correlation on RGR and NAR. 4. The crop growth rate(CGR) in each experimental plot was increased until 50 days after transplanting, and then decreased. After that time, the maxium CGR value appeared in the control plot (1.56g/$\textrm{cm}^2$. 10-days), 60 days after transplanting, CGR had positive correlation with LAI. The optimum LAI in the control, 9 hour, 7 hour, 5 hour, and 3 hour photoperiod plots appeared as 1.87, 1.12, 0.83, and 0.18.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.59-67
• /
• 2016

In landscape design by public institutions, although the costs and species of landscape trees stipulated by the Korean Public Procurement Service(PPS) are generally adhered to, the PPS regulations about planting trees with well-developed rootlets are almost entirely neglected. This study aimed to evaluate the performance of buried container modules, which are a new technology and product in landscape production that is able to reduce the defect rate while complying with regulations. To this end, this study measured rootlet density, rootlet development length, rootlet survival rate on excavation, and impairments of tree growth for 3 months after root pruning, and compared these variables for the container modules with those for trees that underwent root pruning in bare ground, and those that were cultivated in a container above ground. The results were as follows: First, the rootlet density was 88% for the trees in container modules, which was very high. Trees that underwent standard root pruning in bare ground had a somewhat lower density of 64%. Meanwhile, the trees that were cultivated in pots above ground died, invalidating measurement. Second, in terms of rootlet development and rootlet survival rate, the trees in container modules showed a mean length of 10.4cm, and 100% survival rate, indicating that there was no rootlet damage caused by excavation. For the trees that only underwent root pruning in bare ground, the mean length was 25.6cm and the rootlet survival rate was only half that of the trees in container modules, at 56%, demonstrating considerable damage. Rootlet development did not occur at all in the trees grown in pots. Third, the trees in container modules and those that underwent root pruning in bare ground did not show any deaths during the root pruning process, or any impairments such as stunted leaf growth. Conversely, the trees grown in pots nearly all died, and severe impairments of tree growth were observed. As shown by the results above, when we evaluated the performance of buried container modules, they showed the most outstanding performance of the three models tested in this study. The container modules prevent defects by stimulating early rooting in environments that with poor conditions for growth, or in trees that are not suited to the summer environment Therefore, it is expected that they would be an optimal means by which to enable compliance with rules such as the regulation presented by the PPS.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.346-352
• /
• 2014

This research was carried out to investigate the effect of supplemental lighting on stable productivity of paprika (Capsicum annuum L.) during low radiation period of winter season. The supplemental lighting sources used in this research were high pressure sodium (HPS) and lighting emitting plasma (LEP). Photosynthetic photon flux density (PPFD) emitted from both lamps decreased as vertical distance from lamp increased. The PPFD of LEP lamps were twice more than that of the HPS lamp per unit distance, but the rate of decreased PPFD of t he LEP per unit distance was higher than that of HPS lamp. And different degrees of PPFD between HPS and LEP lamps by horizontal distance had a smaller degree of difference than by vertical distance at the 100 cm away point. As daily average PPFD measured at the top of the plant under the supplemental lighting during January, the supplemental lighting significantly increased radiation. Radiation of HPS and LEP lighting was 137% and 315% higher than control (without supplemental lighting = sunlight). Air temperature in the top of the plant was not significant different among treatments. HPS and LEP lighting had no effect on increase of flower settings. Leaf length and width with LEP lighting was the longest, photosynthetic was higher than those of other treatments. Supplemental lighting treatments significant increased fruit length and diameter. Especially LEP lighting treatment had a greater effect on fruit length and diameter. In conclusion, LEP lighting treatment during low radiation period greatly affected growth and production of paprika. Further research will be required for the suitable application of LEP lighting in paprika production.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.6
• /
• pp.514-520
• /
• 1992

Performance of direct seeded paddy rice in ridged dry soil was evaluated at different seeding methods (broadcasting, drilling, and seeding in group) and seeding rates (4, 6, and 8kg /10a). The number of maximum tillers at broadcasting and drilling of seeds was higher than that at seeding in group. At broadcasing and drilling the number of maximum tillers at seeding rate of 6kg /10a was greater than that at 4 or 8kg /10a, but at seeding in group the number of maximum tillers increased with seeding rates. Among the seeding methods there were no differences in the number of seedlings per unit area, culm and panicle lengths, and productive tiller ratio, but heading date at seeding in group was delayed by a day compared with broadcasting or drilling. At heading stage leaf area index(LAI) and dry matter production at broadcasting of seeds were higher compared with drilling and seeding in group, but light transmission ratio at drilling and seeding in group was higher than that at broadcasting of seeds. Although the number of seedlings increased with seeding rates, LAI and dry matter production at heading stage, culm and panicle lengths, and productive tiller ratio were not different among the seeding rates. There were no differences in the number of panicles and spikelets per unit area, 1,000 grain weight, yield, and harvest index among the seeding methods. The number of spikelets per panicle at seeding in group was higher, but percent ripened grains was lower compared with broadcasting and drilling. There were no significant differences in the number of panicles and spikelets per panicle and unit area, percent ripened grains, and harvest index among the seeding rates, but yield at seeding rate of 6kg /10a was higher than at 4 or 8kg /10a. There were no significant differences in tiller length, bending moment, and fresh weight of tiller among the seeding methods. Breaking strength was lower in the order of seeding in group, drilling, and broadcasting of seeds. However, lodging index was similar among the seeding rates and lodging was not occurred in the field. There was a significant interaction in the cellulose, hemicellulose, and lignin contents of culm base between seeding methods and seeding rates.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.259-264
• /
• 1999

A field experiment was carried out to determine the optimum application level of dicamba herbicide for efficient control of Calystegia japonica in silage corn field. Six treatments of application levels (0 ; control, $0.75{\ell},\;1.0{\ell},\;1.25{\ell},\;1.5{\ell},\;and\;2.0{\ell}/ha$) were arranged at National Livestock Research Institute, RDA, Suwon in 1995. The hybrid silage corn was DK 729, and dicamba herbicide was applied at 5~6 leaf stage of corn. The growth of corn was poor in control plot, and the days for tasseling and silking were delayed 1~4 days when compared with the plots of herbicide application. The control efficiency of Calystegia japonica was excellent as 74.3~94.6% in the plots of dicamba application. A slight injury of herbicide was observed at early stage of corn when applied at $1.25{\ell}$ and $1.5{\ell}$ of dicamba per ha, and severe injury was found at $2.0{\ell}$ of dicamba. Forage dry matter(DM) yield, and length of ear in the plots of dicamba treatments were significantly higher than those of control. The DM yield of control(4,866kg/ha) was only about 30% of dicamba treatment plot (14,960~16,340kg/ha). However, there was no yield difference among dicamba application level. The percentage of ear to total DM yield was ranged from 33.6 to 39.4%. With application of herbicide, the contents of crude protein and nitrogen free extract were increased, and that of crude fiber was decreased in stover. However, nutritive value of corn ear was very similar among all treatments, regardless of herbicide treatment. From the above results, it is recommended that optimum application level of dicamba herbicide was $0.75{\sim}1.0{\ell}/ha$ for efficient control of Calystegia japonica and for silage corn production without herbicide injury.

• Journal of Korea Water Resources Association
• /
• v.42 no.11
• /
• pp.911-920
• /
• 2009

Virtual water is defined as the volume of water required to produce a commodity or service. The degree of food self-sufficiency is currently about 27 % in South Korea, so that Korea is one of the largest net virtual water import countries for agricultural product, thus it is necessary to estimate suitable virtual water for South Korea. The objective of this paper is to quantify the agricultural virtual water use (AWU) and virtual water content (VWC) using the method suggested by Chapagain and Hoekstra during the period 1991-2007. To calculate the virtual water content, 44 different crop production quantity and harvested area data were collected for 17 years and FAO Penman-Monteith equation was adapted for computing crop consumptive use of water. As the results, AWU has been estimated at 15.1 billion $m^3$ in average showing a tendency to decrease. Rice has the largest share in the AWU, consuming about 10.1 billion $m^3$/yr which is about 75 % of gross AWU, and the VWC is 1600.1 $m^3$/ton for paddy rice. The largest VWCs of crops are oilseed and tuber crop, and the smallest are leaf and root vegetables. The primary crop production VWC can be used for calculating the VWC of various secondary products using the contribution ratio, therefore the results of this study are expected to be used as basic data for national agricultural water footprint.

• Journal of Korean Society of Forest Science
• /
• v.23 no.1
• /
• pp.17-27
• /
• 1974

In order to investigate the variation of nutritive value, fertilizer value, productivity and growth performance by the number of cutting times in Lespedeza bicolor, Lespedeza maximowiczii and Lespedeza japonica var. intermedia, the plots of one, two and four cutting times in a year had been made through 1972 to 1973. The results are summarized as follows. 1. Lespedeza bicolor, Lespedeza maximowiczii and Lespedeza japonicavar. var. intermedia showed increase of growth and productivity in two plots excluding the plots of four time cuttings. 2. Significant differences at 1% level were shown among the species and the number of cutting times in total grass yield. Lespedeza bicolor showed the greatest production, and followed by Lespedeza maximowiczii and Lespedeza japonica var. intermedia. The plots of one cutting time a year produced more dry weight than that of two and four cutting times. The production in plots of fourth cutting showed less growth and yield. 3. The ratios of dry weight to fresh weight and of leaf weight to stem weight were decreased when the number of cutting times increased in Lespedeza bicolor, Lespedeza maximowiczii and Lespedeza japonica var. intermedia. 4. Crude protein was decreased, though crude fiber content was increased when the grasses were growing more and more. Conent of crude fat showed great variation by the number of cutting times and cutting period seoson. 5. Early cut tings of Lespedeza showed higer fertizer value than late cuttings in all the species. 6. It is suggested that two and three time cutting through a year in Lespedeza bicolor and Lespedeza japonica var. intermedia having high nutritive and fertilizer value is good when using the Lespedeza species as a fodder or manuers, and one time cutting a year will be good when using the Lespedeza species as a fuel.