• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.215-222
• /
• 1993

본 연구에서는 판 스프링의 길이가 두께에 비하여 비교적 큰 것을 고려하여 판스프링의 기하학적 치수와 물성치들을 이용하여 판스프링의 강성과 조립된판 스프링 집합체의 강성을 예측할 수 있는 방법을 본 이론과 변형률 에너지이론을 적용하여 개 발하였고 그 개발된 방법으로 구한 강성예측치와 특성실험에서 얻은 강성치를 비교, 분석하여 판 스프링 강성해석 방법의 신뢰성을 보임과 동시에 독자적인 홀드다운스프 링 집합체의 특성해석 방법을 제시 하였다.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.88-97
• /
• 1995

The leaf spring is used in the suspension of most buses and trucks due to its compactness, which reduces the shock-force and the vibration from the road, and increases passenger comfortability and carlife. Of the various kinds of leaf springs, the leaf spring without eyes can be found easily in the heavy duty truck, and has different characteristics to the leaf spring with eyes in the case of large free camber. Because of radius change, the leaf without eyes slips on the supports, which makes the deflection. The difference is due to this deflection. In this paper, we show the general method of characteristic analysis, for example, Pandan method, can be no more applicable to these springs. Thus considering the geometry deflection by slip, we have developed the equation of the characteristic of the leaf spring without eyes and prove the effectiveness of this equation by experiment. From the result, at large camber the slip deflection is large and as camber smaller, this is smaller. At the camber behind some value, the effect of slip no longer influence to the characteristic of leaf springs.

• 한국정밀공학회지
• /
• 제12권7호
• /
• pp.82-91
• /
• 1995

Many kind of springs are used in the suspension of automotive vehicles and among these the leaf spring and the air spring are included. These two springs have not been generally used together in one suspension, but recently the automotive models which use these two springs together increase. This reason is due to the merit of the combination of two type springs. The merits are two. One is the character of air spring, that is, the natural frequen- cy of system is constant in spite of variable weight. The other is the character of leaf spring, that is, the suspension mechanism is simple. The combination spring is used in medium size and special purpose bus. In this paper, we formulate the condition which the leaf spring must satisfy to be optimal design in the combination spring. And experiment is performed to prove the theory. The results are that the combination spring is better than leaf spring in the ride, and that the purposed theory is good for the combination spring design.

• Nuclear Engineering and Technology
• /
• 제27권5호
• /
• pp.760-766
• /
• 1995

Young's Modulus와 단지 기하학적 테이타를 이용하여 흘드다운스프링의 탄성강성도를 해석하는 방법을 제시하였다. 제시된 이 방법은 엔지니어링 빔이론과 카스티릴아노 이론을 이용하여 판형흘드다운스프링의 탄성강성도 해석에 적용하였다. 이러한 방법의 효율성과 신뢰성을 보여주기 위하여 제안된 방법으로 부터의 탄성강성도를 여러가지 형태의 홀드다운스프링의 시험결과와 비교하였다. 이러한 결과비교에 의해 제안된 방법이 판형홀드다운스프링의 탄성강성도를 구하는데 있어서 효과적임을 입증하였다.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.99-105
• /
• 2008

Multi-leaf springs are widely used for a major suspension component in many commercial vehicles. The modeling technique of multi-leaf springs is one of the most difficult problems in suspension modeling as the elements have complicated nonlinear characteristics such as a hysteresis behavior due to the friction. In this paper, hysteretic characteristics with the static and dynamic test are modeled and are simulated with three links and joints in MSC.ADAMS. Simulation results showed good agreements with test results. Using this methodology, it is expected that dynamic characteristics of suspension system with multi-leaf spring can be more accurately evaluated in vehicle dynamics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.842-846
• /
• 1996

Leaf springs are widely used as a major suspension component in many commercial vehicles, such as buses, trucks, etc. They have a complex dynamic behavior due to the geometric nonlinear and the contact mechanism between the leaves. The interface conditions between the leaves play a significant role in the global behavior of the comfort and ride of the vehicle system. The paper concentrates on modeling leaf springs and contact frictions between the leaves using a nonlinear finite element approach. A nonlinear load-displacement hysteresis curve for the leaf spring is simulated and its results are compared with test results.

• ETRI Journal
• /
• 제28권3호
• /
• pp.389-392
• /
• 2006

In this letter, a laterally-driven bistable electromagnetic microrelay is designed, fabricated, and tested. The proposed microrelay consists of a pair of arch-shaped leaf springs, a shuttle, and a contact bar made from silicon, low temperature oxide (LTO), and gold composite materials. Silicon-on-insulator wafers are used for electrical isolation and releasing of the moving microstructures. The high-aspect-ratio microstructures are fabricated using a deep reactive ion etching (DRIE) process. The tandem-typed leaf springs with a silicon/gold composite layer enhance the mechanical performances while reducing the electrical resistance. A permanent magnet is attached at the bottom of the silicon substrate, resulting in the generation of an external magnetic field in the direction vertical to the surface of the silicon substrate. The leaf springs show bistable characteristics. The resistance of the pair of leaf springs was $7.5\;{\Omega}$, and the contact resistance was $7.7\;{\Omega}$. The relay was operated at ${\pm}0.12\;V$.

• 산업기술연구
• /
• 제19권
• /
• pp.31-42
• /
• 1999

This paper presents a method for evaluating the performance of a leaf spring suspension and an air spring suspension systems for trucks in terms of ride and handling. Leaf springs, which generally have non-linear progressive force-deflection characteristics, are modeled using beam and contact elements. The leaf spring analysis model shows good correlation with experimental results. Each component of an air spring suspension system, which is a single leaf, air spring, height control valve, compressor and linkages, is modeled appropriately. Non-linear characteristics of air spring are accounted for using the measured data, and pressure and volume relations for height control system is also considered. The wheel rate of the air suspension is taken lower but roll stiffness is taken higher than those of leaf springs to improve ride and handling performance, which is verified through driving simulations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.636-642
• /
• 2000

A method for reducing the contact noise of the Progressive Multi-Leaf Spring was investigated. It was found that the contact noise between the main and the help springs is the main source of the noise through our experiments. The conclusions from our experiments were compared with those from our numerical analysis by use of ABAQUS. The main parameters for the unexpected noise in the leaf spring were investigated through structural analysis to make describing noise generation. The contact process between the two leaves is examined by numerical calculations by ABAQUS. The noise produced by the leaf spring could be dramatically reduced by changing the shape of help spring so as to remove a translational jump of the contact point between the main and the help springs. Even with the help spring of the new proposed shape the stiffness of the whole spring did not change much.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.147-153
• /
• 2004

This paper presents an analytical modeling technique fer representing a hysteretic behavior of a multi-leaf spring used for a large truck. It divides a nonlinear hysteretic curve of the multi-leaf spring into four parts; loading part, unloading part and two transition parts. It provides conditions fur branching to a part of the curve corresponding to a current multi-leaf spring status. This paper also presents a computational modeling technique of the multi-leaf spring. It models the multi-leaf spring with three links and a shackle. It assumes those components as rigid bodies. The links are connected by rotational joints, and have rotational springs at the joints. The spring constants of the rotational springs are computed with a force from the analytical model of the hysteretic curve of the multi-leaf spring. Static and dynamic tests are performed to verify the reliability of the presented techniques. The tests are performed with various amplitudes and excitation frequencies. The hysteretic curves from the tests are compared with those from the simulations. Since th e presented techniques reproduce the hysteretic characteristic of the multi -leaf spring faithfully, they contribute on improving the reliability of the computational model of a large truck.