• Geomechanics and Engineering
• /
• v.15 no.6
• /
• pp.1135-1141
• /
• 2018

Volume changes of soils induced by inorganic acids cause severe foundation and superstructure failures in industrial buildings. This study aimed to assess the potential of fly ash to control volume changes in soils under acidic environment. Two soils such as black cotton soil predominant with montmorillonite and kaolin clay predominant with kaolinite were used for the present investigation. Both soils exhibited an increase in swelling subjected to phosphoric acid contamination. Ion exchange reactions and mineralogical transformations lead to an increase in swelling and a decrease in compressibility in black cotton soil, whereas phosphate adsorption and mineral dissolution lead to an increase in swelling and compressibility in case of kaolin clay. Different percentages of Class F fly ash obtained from Ramagundam national thermal power station were used for soil treatment. Fly ash treatment leads to significant reduction in swelling and compressibility, which is attributed to the formation of aluminum phosphate cements in the presence of phosphoric acid.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.873-881
• /
• 2004

A serious of EK remediation tests on contaminated soil are performed under unsaturated conditions and analyzed for electrical potential, water content, pH and so on. The results indicated that electrical potential and pH distributions in the sample are dependent on the amount and inward/outward flow of hydrogen ion. Specially, for the closed system the water content is largely decreased with the flow of hydrogen. The maximum electrical conductivity is measured at the catholyte of CEM(Sealing) test and directly related to the remedial efficiency. Although pHs in the region near to the anode are similarly developed, the different concentration of lead is measured with the electrical gradient contrary to the lead concentration dependent on pH within the sample.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1255-1257
• /
• 2005

The increase of secondary electron-emitting coefficient is effective to reduce the discharge voltage as well as to improve the luminance efficiency of PDP. We investigated the properties of ${\gamma}$ with composition and different dielectric constants, and the microstructure of dielectric after ion collision. As a result the dielectric of PbO system showed higher ${\gamma}$ compared with Pb-free system. However, there was no difference in ${\gamma}$ when the MgO protective layer was covered.

• Journal of the Korean institute of surface engineering
• /
• v.4 no.1
• /
• pp.16-23
• /
• 1971

In this study , fluoborte solution consisting of lead fluoborate, tin fluoborate and cupric acetate was used. By addition of small amount of Cu+= ion to the solution, the Cu content of deposition layer was almost controlled less than 5%. The amount of Cu in deposition layer was almost constant without any influence of Pb++ & Sn++ in the solution, and the amount of Pb was increased by the increase of total concentration of Pb++ +Sn++ in the solution, and the amount of Pb was increased by the increase of total concentration of Pb++ +Sn++ in the solution . Agitation of plating solution & low current density result in the increase of Cu content. Analyzing of microscopic structures and etching tests of the deposited alloy, it was believed that the alloy had a lamellar structure consisting of copper rich lamellar and lead rich layer.

• Journal of Environmental Science International
• /
• v.11 no.4
• /
• pp.361-366
• /
• 2002

Several effects on Pb$^{2+}$ removal by crab shell from aqueous solution were investigated. As the increase of initial Pb$^{2+}$ concentration and decrease of initial crab shell concentration, the time required to reach an equilibrium state and the residual Pb$^{2+}$ concentration increased. In our experimental ranges, the optimum initial Pb$^{2+}$ concentration and crab shell concentration were below 103 mg/$\ell$ and over 0.5 mg/$\ell$, respectively. Also, in order to investigate the mechanism of Pb$^{2+}$ removal by crab shell in aqueous solution, the crab shell was compared with chitosan and chitin on aspects of Pb$^{2+}$ removal capacity and Pb$^{2+}$ removal rate. The Pb$^{2+}$ removal by crab shell was greater than that by chitin and chitosan. The role of chitin was not so great in Pb$^{2+}$ removal by crab shell. The Pb$^{2+}$ removal by chitosan was not exactly correlated to the molecular weight of chitosan. weight of chitosan.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1054-1058
• /
• 1994

Different behavior on the formation of soluble intermediate was observed depending on the substrate employed during the nucleation of lead dioxide from plumbous ion using a rotating ring-disk electrode. It was found that no soluble intermediate was formed at glassy carbon electrode, while the presence of soluble intermediate could be detected at platinum substrate. From the different anodic behavior of two substrates, the formation of a probable Pb(Ⅲ) soluble intermediate was suggested. A most probable nucleation mechanism at the platinum substrate involving a second order chemical reaction was derived on the basis of rotating disk electrode experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.281.2-281.2
• /
• 2013

Since heavy metal ions included in water or food resources have critical effects on human health, highly sensitive, rapid and selective analysis for heavy metal detection has been extensively explored by means of electrochemical, optical and colorimetric methods. For example, quantum dots (QDs), such as semiconductor QDs, have received enormous attention due to extraordinary optical properties including high fluorescence intensity and its narrow emission peaks, and have been utilized for heavy metal ion detection. However, the semiconductor QDs have a drawback of serious toxicity derived from cadmium, lead and other lethal elements, thereby limiting its application in the environmental screening system. On the other hand, Graphene oxide (GO) has proven its superlative properties of biocompatibility, unique photoluminescence (PL), good quenching efficiency and facile surface modification. Recently, the size of GO was controlled to a few nanometers, enhancing its optical properties to be applied for biological or chemical sensors. Interestingly, the presence of various oxygenous functional groups of GO contributes to opening the band gap of graphene, resulting in a unique PL emission pattern, and the control of the sp2 domain in the sp3 matrix of GO can tune the PL intensity as well as the PL emission wavelength. Herein, we reported a photoluminescent GO array on which heavy metal ion-specific DNA aptamers were immobilized, and sensitive and multiplex heavy metal ion detection was performed utilizing fluorescence resonance energy transfer (FRET) between the photoluminescent monolayered GO and the captured metal ion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.3
• /
• pp.279-285
• /
• 2008

CNC (Carbon Nano Colloid) was used as an additive to the positive electrode to improve the discharge performance of sealed lead-acid batteries, The cathode active material ($PbO_2$) has a relatively low utility of less than 60 % compared with other kind of batteries, such as Ni-MH and Lithium ion, In this study, to overcome the above-mentioned problem we investigated the effects of CNC addition on the enhancement of electrical connection with not-utilized $PbO_2$ and resultantly electrical conductivity of electrode, We examined low rate discharge capacities, high rate discharge capacities and internal resistances of the batteries containing various amounts of CNC. From these results, we found out that the addition of CNC into the positive electrode made a significant improvement in high rate discharge capacity, We also suggested the optimum content of CNC material in positive electrode.

• Journal of the Korean Mathematical Society
• /
• v.45 no.6
• /
• pp.1635-1646
• /
• 2008

Schanuel's formula describes the distribution of rational points on projective space. In this paper we will extend it to algebraic points of bounded degree in the case of ${\mathbb{P}}^1$. The estimate formula will also give an explicit error term which is quite small relative to the leading term. It will also lead to a quasi-asymptotic formula for the number of points of bounded degree on ${\mathbb{P}}^1$ according as the height bound goes to $\infty$.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.2
• /
• pp.253-258
• /
• 2007

The adsorption capacity of bone char for lead, cadmium and zinc was studied in both single and binary multiple component systems. Equilibrium experimental studies have been performed to determine the sorption capacity of bone char for each metal ion. These have been analysed using single and multi-component equilibrum models. The results show that the sorption of metal ions for multi-component systems can be predicted reasonably well from the IAS theory with the Langmuir equation, the Freundlich and the Slip equation for metal ions.