• 제목/요약/키워드: Lead in air

검색결과 621건 처리시간 0.029초

해저터널 열차 화재 시 구난역 에어커튼 시스템의 성능에 관한 실험 연구 (Experimental study on applicability of Air-Curtain system in train fire at subsea tunnel rescue station)

  • 박병직;신현준;유용호;박진욱;김휘성;김양균
    • 한국터널지하공간학회 논문집
    • /
    • 제20권1호
    • /
    • pp.1-9
    • /
    • 2018
  • 터널 화재는 밀폐된 공간에서 발생하기 때문에 시야 확보가 매우 어려우며, 빠른 속도로 연기가 차오르기 때문에 대형재난사고로 이어질 수 있다. 본 연구에서는 해저터널 열차 화재 시 구난역을 안전하게 사용하기 위하여 에어커튼 및 가압송풍기를 구난역 플랫폼에 설치하고 실물화재실험을 통하여 에어커튼 시스템의 적용성을 확인하였다. 실제 규모의 구난역에 에어커튼 시스템을 설치하였으며, 화원으로 사용한 액체 햅탄이 전소될 때까지 약 2분 동안 실험을 진행하였다. 에어커튼 시스템이 작동한 경우에는 구난역 플랫폼의 온도와 외부의 온도는 약 $160^{\circ}C$ 차이가 발생하였으며, 에어커튼 시스템이 작동한 경우에 구난역 플랫폼 내부의 일산화탄소는 작동하지 않은 경우의 구난역 플랫폼 내부와 비교하여 약 160 ppm 적게 일산화탄소가 측정되었다. 따라서 본 실물화재 실험을 통하여 해저터널 구난역 에어커튼 시스템이 화재로부터 발생한 열기와 유독가스를 차단할 수 있음을 확인하였다.

서울시내 가로수목의 수용성유황 및 중금속 함량에 관한 연구 (A Study on the Contents of Soluble Sulfur and Heavy Metals in the Leaves of the Roadside Tree in Seoul Area)

  • 김면섭;이광국
    • 한국대기환경학회지
    • /
    • 제4권1호
    • /
    • pp.1-12
    • /
    • 1988
  • This study was carried out to measure the contents of soluble sulfur and heavy metals in the leaves of roadside tree at 34 sampling sites of Seoul area from the Sep. 1 to Sep. 30 during 1985 and 1986. The results were as follows; 1. Average contents of soluble sulfur at all sampling sites were; Plantanus orientalis 0.474%, Ginkgobioloba 0.562%, and Salix pseudolasiogyne 0.566%. 2. Correlation between sulfur dioxide concentration in the air and soluble sulfur in the leaves by area were; Green belt area R = 0.985, Residential area R = 0.856, Commercial area R = 0.668, Industrial area R = 0.886. Correlation by species were ; Platanus orientalis R = 0.817, Ginkgobiloba R = 0.771, Salix pseudo-lasiogyne R = 0.824. 3. Correlation between $SO_X$ concentration in the air and sulfur contents in the leaves showed positive significance. 4. Contents of soluble sulfur in the heavy traffic area were higher than that of light traffic area. 5. Heavy metal contents of 1986 were higher than that of 1985; Fe> Mn > Zn > Pb > Cu > Cd > Cr. 6. Lead contents in the leaves of 1986 were; Platanus orientalis 16, 701 ppm, Gingobiloba 21,729ppm, Salix Pseudo-lasiogyne 12.418 ppm.

  • PDF

이류체 포그 냉방시스템의 제어알고리즘 개발 (Development of Control Algorithm for Greenhouse Cooling Using Two-fluid Fogging System)

  • 남상운;김영식;성인모
    • 생물환경조절학회지
    • /
    • 제22권2호
    • /
    • pp.138-145
    • /
    • 2013
  • 최근 국내에 많이 보급되고 있는 이류체 포그 냉방시스템의 효율적인 제어알고리즘을 개발하기 위하여 다양한 조건의 분무사이클을 설정하여 토마토재배 온실에서 냉방실험을 실시하였다. 냉방효과는 평균 $1.2{\sim}4.0^{\circ}C$를 보였고, 냉방효율은 평균 8.2~32.9%로 나타났다. 분무간격에 따른 실험에서 90초 분무사이클의 냉방효율이 가장 높았고, 대체로 분무시간이 길수록, 정지시간이 짧을수록 냉방효율이 높게 나타났다. 이류체 포그시스템의 분무량이 증가할수록 냉방효율이 높아지는 경향을 찾을 수 있었다. 그러나 분무량을 증가시키더라도 내부공기가 포화상태에 가까워지면 더 이상 증발이 일어나지 않으므로 내부공기가 포화상태에 도달하기 전까지 분무량을 증대시키는 방법으로 냉방효율을 높일 수 있을 것으로 판단된다. 냉방효율이 증가함에 따라 실내공기의 포차는 감소하였고 실내외 절대습도 차이는 증가하는 경향을 보였다. 포그의 증발량이 증가할수록 실내와 실외의 절대습도 차이는 커지고, 이에 따라 환기에 의한 수증기 배출이 잘 되어 다시 증발효율을 상승시키므로 냉방효율이 높아지는 순환구조를 갖게 되는 것으로 판단된다. 분무시간과 정지시간에 따른 실내공기의 포차변화를 회귀분석한 결과 $10g{\cdot}kg^{-1}$의 포차 변화에 필요한 분무시간은 120초, 정지시간은 60초로 나타났다. 그러나 온도의 진동폭을 줄이고 냉방효율을 높이기 위해서는 포차의 변동범위를 $5g{\cdot}kg^{-1}$으로 설정하여 60초 분무, 30초 정지가 더 적당할 것으로 판단된다. 이류체 포그시스템의 제어방식을 컴퓨터 제어시스템과 현재 보급되고 있는 간편제어시스템으로 분류하여 제어알고리즘을 유도하였다. 자연환기 온실에서 간편 제어시스템을 사용한다면 분무사이클을 60초 on, 30초 off로 설정하고 온도하한은 30~$30{\sim}32^{\circ}C$, 습도상한은 85~90%로 설정할 것을 제안한다.

서울시(市) 대기중(大氣中) 유해(有害) 부유분진(浮遊粉塵)의 성분(成分) -부유분진(浮遊粉塵)의 중금속(重金屬)에 관하여- (Heavy Metals of the Suspended Particulate in Atmosphere of Seoul City)

  • 권숙표;정용;임동구
    • Journal of Preventive Medicine and Public Health
    • /
    • 제12권1호
    • /
    • pp.49-55
    • /
    • 1979
  • In order to investigate air pollution by heavy metals in Seoul city, the suspended particulates in the atmosphere were sampled with high volume air sampler in industrial area(Ku Ro Dong), commerical(Kwang Hwa Moon) and residential(Shin Chon Dong) from January to November, 1977. The sampled suspended particulates were digested and extracted from suspended particulates with the acidic solution by reflux-extraction technique, and were measured by atomic absorption spectrophotometry. And mercury was measured by mercury analyzer applying the reducing sublimation technique. Among heavy metals analyzed, the iron was identified at the highest level in the suspended particulates and the chromium was the least. Through the surveyed area, the concentration of heavy metals of the industrial area was comparatively high among others and the commercial was the second. It was detected that lead was the most concentrated in the suspended particulate of the commercial area, that might be caused of the traffic emissions. The seasonal variations were analyzed and the correlations among heavy metals and total suspended particulate were also calculated. Especially, the iron was highly correlated with total suspended particulate in all the surveyed areas.

  • PDF

단위 팽창재량 및 양생 환경요인 변화에 따른 콘크리트의 팽창 특성 (Expansion Properties of Concrete under Various Unit Contents of Expansion Admixture and Curing Conditions)

  • 한천구;류현기;홍상희;김정진
    • 콘크리트학회논문집
    • /
    • 제12권1호
    • /
    • pp.79-88
    • /
    • 2000
  • Usually, the expansive additives is used to prevent the occurrence of drying shrinkage in concrete. However it may sometimes be over-added in field due to the insufficient cognition of constructor's, which may cause the serious problems in concrete structures. In this study the experiments are performed to present the expansion properties of concrete by varying the water to binder ratios, unit contents of expansive additives and curing conditions. By the results, the strength showed an increase with the addition of expansion additives from 30kg/㎥ up to 50kg/㎥, and a great decrease by contraries if the larger amount are added. Also the more the expansion additives were used, the more length change occurred in concrete. In view of the curing conditions, the concrete by air cured appeared a little expansion even the unit expansion additives increased, which showed an opposite inclination of that with standard curing. This could be explained by the less occurrence of hydration in air condition which also lead to the little expansion of concrete. Hence the expansion concrete to be cured in water or moisture condition became an especial important thing. concrete using expansive additives showed that high expansion was taken place with the rise of temperature.

카드뮴과 납의 다경로 노출량 추정 및 통합 위해성 평가 (Estimation of Multi-Route Exposure and Aggregated Risk Assessment for Cadmium and Lead)

  • 유창우;권훈정
    • 한국식품위생안전성학회지
    • /
    • 제35권6호
    • /
    • pp.587-601
    • /
    • 2020
  • 국내외적으로 유해물질의 통합 노출에 대한 관심은 높아지고 있다. 이러한 흐름에 따라 다양한 경로를 통해 노출될 수 있는 중금속에 대한 통합 노출 연구가 필요하다. 카드뮴과 납은 각각 신장 독성과 인지 장애 등 다양한 독성을 나타낼 수 있으며 또한 발암 물질로 알려져있다. 따라서 본 연구에서는 카드뮴과 납의 노출량 추정 및 통합 위해성 평가를 진행하였다. 2016, 2017년의 7기 국민건강영양조사에 참여한 10,733명의 식품, 물, 흡연과 간접흡연, 호흡, 화장품, 여성용 위생용품을 통한 중금속 노출 추정량을 계산하였다. 결과적으로 카드뮴과 납 모두 식품을 통한 노출이 제일 높게 나타났다. 이외에도 흡연은 카드뮴의 주요한 노출원이었으며, 납은 화장품을 통해 높은 농도로 노출되었다. 통합 위해평가에서도 식품이 가장 큰 영향을 미쳤다. 지역적 특성의 차이는 노출 추정량의 차이를 보이지 못하였으나, 연령 별, 성별 간 노출 추정량은 큰 차이를 보였다. 특히, 월경 중인 성인 여성의 경우 카드뮴, 월경 중이지 않은 여성은 납의 노출 추정량이 더 높으며 신체 대사를 고려하였을 때, 그 위험성이 더 클 수 있음을 암시하였다. 결론적으로 노출량 추정 및 통합 위해평가 모두 식품이 주요 노출원이었다. 다만, 잠재적 위험을 방지하기 위해 다른 경로에 대한 노출량 추정 및 위해평가가 요구된다.

액화 공기 에너지 저장 기술(LAES)의 경제성 분석 (Economic Evaluation of Liquid Air Energy Storage (LAES) System)

  • 고아름;박성호;류주열;박종포
    • 신재생에너지
    • /
    • 제16권1호
    • /
    • pp.1-14
    • /
    • 2020
  • Liquid air energy storage (LAES) using gas liquefaction has attracted considerable attention because of its mature technology, high energy density, few geographical constraints, and long life span. On the other hand, LAES has not yet been commercialized and is being developed recently. Therefore, few studies have performed an economic analysis of LAES. In this study, the levelized cost of electricity was calculated and compared with that of other energy storage systems. As a result, the levelized cost of electricity of LAES was $371/MWh. This is approximately $292/MWh, $159/MWh, $118/MWh, and $3/MWh less than that of the LiCd battery, VRFB battery, Lead-acid battery, and NaS battery. In addition, the cost was approximately $62/MWh and $195/MWh more than that of Fe-Cr flow battery and PHS. Sensitivity analysis of the levelized cost of electricity according to the main economic factors was performed, and economic uncertainty analysis was performed through a Monte-Carlo simulation. The cumulative probability curve showed the levelized cost of electricity of LAES, reflecting price fluctuations in the air compressor cost, electricity cost, and standing reserve hourly fee.

Past and Future Temperature and Precipitation Changes over Korea using MM5 Model

  • Oh, Jai-Ho;Min, Young-Mi;Kim, Tae-Kook;Woo, Su-Min;Kwon, Won-Tae;Baek, Hee-Jeong
    • 한국제4기학회:학술대회논문집
    • /
    • 한국제4기학회 2004년도 하계학술대회
    • /
    • pp.29-29
    • /
    • 2004
  • Long term observational analysis by climatologists has confirmedthat the global warming is no longer a topic of debate among scientists andpolicy makers. According to the report of IPCC-2001 (Intergovernmental Panelon Climate Change), the global mean surface air temperature is increasinggradually. The reported increase of mean temperature is by 0.6 degree in the end of twentieth century. This could represent severe threat for propertylosses especially due to increase in the number of extreme weather arising out of global warming. period of model integration from 2001 to 2100 using output of ECHAM4/HOPE-G of Max Planet Institute of Meteorology (MPI) for IPCC SRES (Special Report on Emission Scenarios). The main results of this study indicate increase of surface air temperature by 6.20C and precipitation by 2.6% over Korea in the end of 21st century. Simulation results also show that there is increase in daily maximum and minimum temperatures while decrease in diurnal temperature range (DTR). DTR changes are diminished mainly due to relatively rapid increase of daily minimum temperature than that of daily maximumtemperature. It has been observed that increase in precipitation amount anddecrease in the number of rainy days lead to increase of pre precipitationintensity.

  • PDF

An Experimental Investigation of Yarn Tension in Simulated Ring Spinning

  • Tang Zheng-Xue;Wang Xungai;Fraser W. Barrie;Wang Lijing
    • Fibers and Polymers
    • /
    • 제5권4호
    • /
    • pp.275-279
    • /
    • 2004
  • Yarn tension is a key factor that affects the efficiency of a ring spinning system. In this paper, a specially constructed rig, which can rotate a yam at a high speed without inserting any real twist into the yarn, was used to simulate a ring spinning process. Yarn tension was measured at the guide-eye during the simulated spinning of different yarns at various balloon heights and with varying yarn length in the balloon. The effect of balloon shape, yarn hairiness and thickness, and yam rotating speed, on the measured yarn tension, was examined. The results indicate that the collapse of balloon shape from single loop to double loop, or from double loop to triple etc, lead to sudden reduction in yarn tension. Under otherwise identical conditions, a longer length of yarn in the balloon gives a lower yarn tension at the guide-eye. In addition, thicker yarns and/or more hairy yarns generate a higher tension in the yarn, due to the increased air drag acting on the thicker or more hairy yarns.

가스터빈연소기에서 스월 인젝터의 분무특성에 관한 연구 (A Numerical Analysis on the Characteristics of Spray by Swirl Injector in Gas Turbine Combustor)

  • 이성혁;유홍선;이인섭;홍성국
    • 한국안전학회지
    • /
    • 제15권3호
    • /
    • pp.30-39
    • /
    • 2000
  • The present paper deals with the numerical simulation for the spray characteristics with swirling turbulent flows and dilution flows from swirl injectors in a simplified can type of gas turbine combustor. The main objective is to investigate the characteristics of swirling turbulent flows with dilution flows and to provide the qualitative results for the spray characteristics such as the droplet distribution and Sauter Mean Diameter(SMD). The gas-phase equations based on Eulerian approach were discretized by Finite Volume Method, together with SIMPLE algorithm and the Reynolds -Stress-Model. The liquid-phase equations based on Lagrangian method were used to predict the droplet behavior. The results of preliminary test are generally in good agreement with experimental data, and show that the anisotropy exists in the primary zone due to swirl velocity and injected air from primary injector, and then gradually decays due to turbulent mixing and consequently near-isotropy occurs in the region between primary and dilution zones. For the spray characteristics, it is indicated that the swirling flows of primary jet region increase the droplet atomization. In addition, it is showed that the swirling flows at the inlet region lead the air-fuel mixture to be distributed near the igniter and can significantly affect the spray behavior in the primary jet region.

  • PDF