• 제목/요약/키워드: Lead in air

검색결과 621건 처리시간 0.027초

무연 (Na1,K)NbO3 계 세라믹스를 이용한 AE센서의 감도특성 (Sensitivity Characteristics of Acoustic Emission(AE) Sensor using the Lead-free (Na1,K)NbO3 Ceramics)

  • 류주현;이갑수;홍재일
    • 한국전기전자재료학회논문지
    • /
    • 제20권3호
    • /
    • pp.218-222
    • /
    • 2007
  • In this study, Acoustic emission(AE) sensors were fabricated using lead-free piezoelectric ceramics for prohibiting environmental pollution. Structure of AE sensors were designed as Langvin type air backing form. Here, the piezoelectic element was used as PZT(EC-65)(AE1) and NKN(AE2), respectively. The measured resonant frequency, the maximum sensitivity frequency and sensitivity of AE sensors were as follows ; 143 kHz, 29.4 kHz and 69.3 dB in AE1 and 179 kHz, 29.4 kHz and 66.3dB in AE2, respectively.

해양에서 황산화물 오염 규제에 대한 소고 (Some Issues on the International Regulations Associated with the Air Pollution Caused by the SOx Emission at Sea)

  • 이건호;송무석
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제11권4호
    • /
    • pp.221-226
    • /
    • 2008
  • 선박의 추진 및 전기 발생장치의 연료에 포함되어 있는 황산화물이 연소 중에 대기로 방출되는데 이러한 황산화물들은 공기오염의 주된 원인이 되고 있다. 행상에서 선박에 의해 발생하는 황산화물은 육상운송 수단에 의한 것 보다 훨씬 심각하여, 국제 해사 기구 및 유럽연합에서는 해상에서 선박에 의해 발생되는 황산화물 배출에 대한 규제를 강화하고 있다. 해양에서 황산화물 배출 규제를 근본 적으로 만족하기 위해서는 저유황의 연료유사용하는 것이고, 다른 한 가지는 선박에 황산화물 처리장치를 설치하여 배출되는 황산화물을 처리하는 것이다. 저 유황유의 사용은 선주들에게 운항비 증가를 가져다 주며, 처리 장치의 설치는 선가 상승의 원인이 될 수 있어, 선박이 어떤 해역을 운항하는 가에 따라 적용 방법에 대한 세심한 주의가 요한다. 본 소고는 이런 국제 규제의 변화와 대응에 대한 검토와 제언을 담고 있다.

  • PDF

Morphology, Phase Contents, and Chemical Composition of Nanopowders Produced by the Electrical Explosion of Tin-Lead Alloy Wires

  • Kwon, Young-Soon;P. Ilyin, Alexander;V. Tichonov, Dmitrii
    • 한국분말재료학회지
    • /
    • 제10권3호
    • /
    • pp.157-160
    • /
    • 2003
  • Phase contents and elemental composition of ultradispersed powders obtained by the electrical explosion of tin-leadalloy powders are investigated. It is demonstrated that during the explosion and subsequent cooling, surface layers of powder particles are enriched in lead compared to the initial alloy. The thermal stability of powders oxidizing in air is also investigated.

재생 납 생산 공장과 인근 지역의 공기 중 납 농도 수준 비교 (Comparison of Airborne Lead Concentration in and Around Lead Production Plant)

  • 박창환;박윤경;오윤희;최인자;차원석;최상준
    • 한국산업보건학회지
    • /
    • 제29권1호
    • /
    • pp.34-41
    • /
    • 2019
  • Objective: This study is conducted to evaluate airborne lead concentration in and around lead production plant. Methods: Airborne lead concentration was monitored simultaneously inside of the processes of lead recycling factory and outside of factory which include stack, boundary of factory and residential area 1 km and 7.5 km from factory, respectively. All samples were measured three times at 1.5 m from the ground and analyzed using inductively coupled plasma mass spectrometer, inductively coupled plasma optical emission spectrometer or flame atomic absorption spectrometer. Results: All airborne lead concentrations measured inside of factory($13.9{\mu}g/m^3-252.9{\mu}g/m^3$) and outside of factory($0.001{\mu}g/m^3-54.97{\mu}g/m^3$) showed log-normal distribution. Geometric mean lead concentration, $54.81{\mu}g/m^3$, measured inside of factory was significantly higher than outside of factory, $0.20{\mu}g/m^3$(p<0.01). Among the samples measured inside the factory, lead concentration was the highest in the refining process($59.02{\mu}g/m^3-252.9{\mu}g/m^3$). In the case of the samples outside the factory, the nearest chimney was the highest($3.84{\mu}g/m^3-54.97{\mu}g/m^3$), and the lead concentration at the farthest place, 7.5 km from the factory was the lowest($0.001{\mu}g/m^3-1.7{\mu}g/m^3$). The arithmetic lead concentration, $0.45{\mu}g/m^3$ in the residential area near the factory was below the atmospheric environment standard of $0.5{\mu}g/m^3$, but the maximum concentration of $3.4{\mu}g/m^3$ was exceeded. Conclusions: Airborne lead concentration in residential area, 1 km away from lead recycling plant, may exceed ambient air standard of $0.5{\mu}g/m^3$.

왕복동식 공기압축기의 소음 발생원 분석 연구 (Noise Source Evaluation for Reciprocating Type Air Compressor)

  • 이광길;최승주
    • 한국안전학회지
    • /
    • 제26권4호
    • /
    • pp.20-26
    • /
    • 2011
  • This paper is to investigate noise source for reciprocating type air compressors. The reciprocating type air compressors are widely used in the small and medium sized enterprise and many employees are affected and irritated by their noise during working. The investigation and analysis of the noise source were made according to the ISO 1680/1 and MIL-STD 7410-1 and noise evaluation of each part of compressors was made. Noise emitted from the intake and exhaust valve and the air receiver tank were dominant compared with those from other parts of compressor. Noise from the motor and the revolution of crank mechanism was negligible relatively with the noise sources as mentioned above.

SSP 시나리오에 따른 동아시아 대기질 미래 전망 (Impact of Future Air Quality in East Asia under SSP Scenarios)

  • 심성보;서정빈;권상훈;이재희;성현민;부경온;변영화;임윤진;김연희
    • 대기
    • /
    • 제30권4호
    • /
    • pp.439-454
    • /
    • 2020
  • This study investigates the change in the fine particulate matter (PM2.5) concentration and World Health Organization (WHO) air quality index (AQI) in East Asia (EA) under Shared Socioeconomic Pathways (SSPs). AQI is an indicator of increasing levels about health concern, divided into six categories based on PM2.5 annual concentrations. Here, we utilized the ensemble results of UKESM1, the climate model operated in Met Office, UK, for the analysis of long-term variation during the historical (1950~2014) and future (2015~2100) period. The results show that the spatial distributions of simulated PM2.5 concentrations in present-day (1995~2014) are comparable to observations. It is found that most regions in EA exceeded the WHO air quality guideline except for Japan, Mongolia regions, and the far seas during the historical period. In future scenarios containing strong air quality (SSP1-2.6, SSP5-8.5) and medium air quality (SSP2-4.5) controls, PM2.5 concentrations are substantially reduced, resulting in significant improvement in AQI until the mid-21st century. On the other hand, the mild air pollution controls in SSP3-7.0 tend to lead poor AQI in China and Korea. This study also examines impact of increased in PM2.5 concentrations on downward shortwave energy at the surface. As a result, strong air pollution controls can improve air quality through reduced PM2.5 concentrations, but lead to an additional warming in both the near and mid-term future climate over EA.

활성 알루미나 겔을 혼입한 고로슬래그 경화체의 실내오염물질 흡착 특성 (Adsorption Properties of Indoor Air Pollutants in Blast Furnace Slag Matrix with Active Alumina Gel)

  • 박채울;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.29-30
    • /
    • 2019
  • The indoor air quality of modern people who work indoors more than 80 percent a day has also become a very important factor in their lives. But most indoor air quality is highly polluted due to energy conservation and lack of ventilation. This can lead to pneumonia, asthma and even lung cancer, which can be fatal to children, the elderly and the elderly. Indoor pollutants are caused by boards, wallpaper, paint, etc. used in interior By producing indoor finishing materials using active alumina gel, which is used as dehumidifier, indoor pollutants will be reduced and the possibility of developing respiratory diseases and lung cancer will be reduced.

  • PDF

Differential Humoral Immune Responses in Pb-exposed Mice with Different Circling Preference

  • Kim, Dongsoo
    • 한국독성학회:학술대회논문집
    • /
    • 한국독성학회 2003년도 추계학술대회
    • /
    • pp.161-161
    • /
    • 2003
  • Different circling preference of mice is a reference of inter-individual differences in their endogenous neuroimmune circuits. I have investigated relationship between differential immune responses in mice, who have same age, gender, and genetic background, and circling behavior preference.(omitted)

  • PDF

Plant-scale experiments of an air inflow accident under sub-atmospheric pressure by pipe break in an open-pool type research reactor

  • Donkoan Hwang;Nakjun Choi;WooHyun Jung;Taeil Kim;Yohan Lee;HangJin Jo
    • Nuclear Engineering and Technology
    • /
    • 제55권5호
    • /
    • pp.1604-1615
    • /
    • 2023
  • In an open-pool type research reactor with a downward forced flow in the core, pipes can be under sub-atmospheric pressure because of the large pressure drop at the reactor core in the atmospheric pool. Sub-atmospheric pressure can result in air inflow into the pipe from the pressure difference between the atmosphere and the inside of the pipe, which in a postulated pipe break scenario can lead to the breakdown of the cooling pump. In this study, a plant-scale experiment was conducted to study air inflow in large piping systems by considering the actual operational conditions of an advanced research reactor. The air inflow rate was measured, and the entrained air was visualized to investigate the behavior of air inflow and flow regime depending on the pipe break size. In addition, the developed drift-flux model for a large vertical pipe with a diameter of 600 mm was compared with other correlations. The flow regime transition in a large vertical pipe under downward flow was also studied using the newly developed drift-flux model. Consequently, the characteristics of two-phase flow in a large vertical pipe were found to differ from those in small vertical pipes where liquid recirculation was not dominant.

우리 나라에서 제조/사용하는 일부 무기 안료중 ICP-AES를 이용한 주요 중금속 농도와 MSDS 비치율 및 일치율 비교 (Metal Concentrations Analysed in the Inorganic Bulk Pigment Samples by ICP-AES and the Provision Rate of MSDS and Agreement Rate with MSDS)

  • 김형아;이경주;김용우;김현욱
    • 한국산업보건학회지
    • /
    • 제8권2호
    • /
    • pp.196-208
    • /
    • 1998
  • To improve the quality of environmental measurements and evaluation of the workplace air in the pigment manufacturing industries, we analyzed metal(chromium, cadmium, lead, iron, cobalt, manganese, antimony, titanium, arsenic, and selenium) concentrations by ICP-AES in sixty seven samples of inorganic bulk pigments which are produced and/or used in Korea. We also collected MSDS which has to be supplied by manufacturer and/or supplier and posted in the workplace according to the Hazard Communication Standards, and compared the number of metals listed in each MSDS with the number of metals determined by ICP-AES. Results were as followed; 1. Among seventeen yellowish-colored samples, chromium(2~19%) and lead(0.1~61%) were the two major metals. In thirteen reddish-colored samples, iron was the major component with 37~81%. Cobalt and manganese were detected in blue-colored samples with less than 1%, while antimony and titanium were the major two metals in white-colored pigments with 178~300 ppm and with 36~65%, respectively. 2. In area samples collected in workplace air(one pigments producing factory and five retailer stores), iron and manganese were detected but the concentrations not exceeded the TLVs(1 and $5mg/m^3$, respectively). In three of fifteen samples, the concentrations of lead exceeded the TLV ($0.05mg/m^3$). 3. Two out of seven companies provided MSDS, and the average provision rate was 22.4%. And the coincidence rate of the number of metals referenced in MSDS and determined by ICP-AES mostly accorded, but in one sample, different metal was detected from MSDS. In summary, metals have to be concerned in evaluation of the workplace air dealing with compounds of inorganic pigments dust are cobalt, chromium, iron, manganese, lead and antimony, and these are simultaneously determined by ICP-AES. Taking this opportunity, it is needed to reinforce that the personnel is to be concerned about prevention of workers' ill health regarding to provision of MSDS.

  • PDF