• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.43-52
• /
• 2017

Purpose: Physical and chemical properties of gold is most suitable to be restored of teeth to its original state. Recently zirconia was used instead of gold because of esthetical and intimacy of human body. Because of high strength and high abrasion resistance of zirconia, all zirconia artificial tooth lead to wear the original tooth of opposite site. To preserve this original tooth, zirconia artificial tooth covered with dental ceramic glass was used. When joining the zirconia core and dental ceramic glass, difference of their thermal expansion coefficient and wetting ability is generated the residual stress at interface lead to crack. In order to solve this problem, intermediate layer what is called zir-liner was imported to decrease the residual stress and increase the bonding strength. Methods: In this study, to identify the optimum conditions for manufacturing process, various methods to rough the surface of zirconia core were adopted, and vary the thickness of interlayer, and analyzed bond strength. Results: Bond strength of sanding specimens group showed higher than that of non-sanding specimens group, and once applied intermediate layer with sanding specimens showed highest bond strength with 28 MPa. SEM photomicrographs of zirconia cores fired at $1500^{\circ}C$ showed parallel straight lines in sanding and pockmarked surface in blasting surfaces as abrasion traces. Observation of the destruction section after shear test by SEM were carried out. Liner applied non-sanding group and non-liner applied sanding group all showed interfacial crack. Sandblasting group with non-liner showed remained dental ceramic glass on the surface of zirconia. Sandblasting group with once applied liner showed partially remained liner and dental ceramic glass on the surface of zirconia. XRD analysis revealed that sandblasting group showed higher monoclinic peaks than other specimens group and this result was due to the high collision energy for stress induced phase transformation. Conclusions: A study on the improvement of bonding strength between zirconia and dental ceramic glass steadily carried out for the future to practical use.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.396-399
• /
• 2004

저온 동시소성용 glass-ceramics의 소결 경향성 연구를 위해 lead-borosilicate계 glass를 frit화하여 알루미나분말과 $TiO_2$분말을 $10{\sim}50\;vol%$로 각각 혼합한 후 여러 온도에서 소결하여 소결과 유전 특성을 조사하였다. 그 결과 glass의 연화온도(Ts)가 낮을수록 최대 치밀화 온도가 낮았으며, 반면에 소결밀도는 Ts가 높을수록 높았는데, 이는 glass-ceramicss에서의 결정화도와 관계하였다. 본 연구를 통해 glass-ceramic에서의 소결특성은 glass와 ceramic의 반응성에 의한 2상 석출 정도에 큰 영향을 받음을 알 수 있었으며, ceramic filler로서 알루미나와 $TiO_2$를 이용하여 $900^{\circ}C$에서 소성이 가능하였다. 알루미나의 경우 유전특성$({\epsilon}r=8.5,\;Q{\times}fo=6000)$이 기판용 저유전율 재료로 사용이 가능하였고, $TiO_2$의 경우도 유전특성($({\epsilon}r=17,\;Q{\times}fo=4000)$)이 필터용 고유전율 재료로 사용 가능하도록 높게 나타났다.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.289-299
• /
• 1991

In order to obtain glasses appropriate to the thick film copper conductors, nine glasses based on both lead borosilicate and leadless borosilicate systems were made and the applicabilities of them were examined in conjunction with the requirements for thick film copper conductors. As the results, it was found that all the glasses are fitted to provide suitable sheet resistance, solderability and solder leach resistance to thick film copper conductors. However, it was turned out that only the lead borosilicate based glasses worked for getting usable aged adhesion strength of copper thick film to the alumina substrate, while copper conductor films made from the other glasses had poor aged adhesion strengths. Particularly cuprous oxide added lead borosilicate glass was considered as one of the most favorable glasses for manufacturing thick film copper conductors.

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.250-254
• /
• 1983

The effects of the various amount of $CeO_2$ $MnO_2$ and $Fe_2O_3$ added to the high lead-silicate glasses on the X-ray induced coloration were studied. The light transmissions and chromaticities of the glasses before and after exposing to X-ray radiation were measured to investigate the effects by additivies. The results are as follows ; 1. High lead-silicate glass added $CeO_2$ or $MnO_2$ has a little effect on the transmission but has a considerable effect on the chromaticity. The chromaticies of 56.6wt% PbO content glasses were changed as 3-7 times as those of 28.3wt% PbO content glasses. 2. By the X-ray irradiation glasses containing 0.2-0.5wt% $CeO_2$ were changed the least in chromaticity that is the most effective in preventing the X-ray induced coloration. 3. By X-ray irradiation $MnO_2$ reduced the transmissions and showed purple coloration. 4. Transmission change amounts of the glasses added $CeO_2$ and $Fe_2O_3$ were less than those of the glasses added $CeO_2$ alone by X-ray irradiation.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.226-229
• /
• 2000

Long lengths (<100m) of BSCCO 2223 tapes were fabricated of optimal process. We have I$_c$${\sim}$22A, J$_c$${\sim}$22,000A/cm$^2$(77K, 0T) at last heat treatment, and then prototype 1000A class current lead (length ${\sim}$50cm) fur HTS applications was fabricated using these tapes. Surface of current lead except both end part (${\sim}$1cm) was clothing with fiber glass. Also the transportation properties and thermal loss was studied on prototype 1000A class current lead.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.12
• /
• pp.593-598
• /
• 2001

Transient liquid phase processing was investigated to decrease processing temperatures while maintaining useful piezoelectric properties in the lead zirconate titanate (PZT) system. Niobium oxide$(Nb_2O_5)$ modified crystalline PZT (PZTN) powder was combined with lead silicate $(PS; PbO-SiO_2)$ glass powder and crystalline titania, zirconia, and niobia. Firing above the melting temperature of the lead silicate $(PS; Tm \risingdotseq\; 714^{\circk}C)$ resulted in liquid phase densification of the PZTN followed by dissolution of the titania, zirconia, and niobia into the liquid phase, and crystallization of additional PZTN. The addition of crystalline titania, zirconia, and niobia to react with the lead oxide from the lead silicate phase resulted in an increase in the dielectric and Piezoelectric properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.935-937
• /
• 2006

Phosphate glass system is expected to be useful as a lead-free material in many devices in plasma display panels (PDP). The present study is mainly focused on the evaluation of interface reaction between ceramic fillers and phosphate glass matrix for barrier ribs in PDP. The results suggest that properties of barrier rib depend on the crystallization behavior and interface reaction between the fillers and glass matrix.

• Journal of the Korean Ceramic Society
• /
• v.26 no.6
• /
• pp.829-835
• /
• 1989

Devitrifing solder glasses in a specific group of glass ceramic materials are extensively used in hermetically sealing alumina electronics packages. Preferred frit glass compositions of this study consist of 37~40wt% PbO, 35~40wt% ZnO, 18~20wt% B2O3, 1~3wt% SiO2, 0~6wt% TiO2. The coated frit glasses crystallize during firing and form a strong hermetic seal. DTA and X-ray diffraction were used to characterize crystallization of the glass frit. Frit seal containing 2wt% TiO2 has crystallization temperature of 550~57$0^{\circ}C$ with surface nucleation. Frit seal containing 6wt% TiO2 has crystallization temperature of 515~5$25^{\circ}C$ with bulk nucleation, and the main crystalline phase was perovskite lead titanate having minus expansion coefficient. The average activation energy for the crystallization calculated from Ozawa equation was 65$\pm$10kcal/mol.

• Korean Institute of Interior Design Journal
• /
• v.17 no.1
• /
• pp.3-10
• /
• 2008

This study is concerned with the process of development and architectural characteristics of secular stained glass in the 20th century. Stained glass had been architectural art from the origin. But it had declined since the Renaissance era, and began to revive in the early 20th century. Stained glass work is very flourish in Korea today, but it is still treated as simple decoration or 2-dimensional mosaic. Architect and interior designer even have little understanding of architectural character of stained glass. In order to recover the architectural nature of stained glass, I have considered the process of development of secular stained glass in the 20th century, and analysed the works of Frank Lloyd Wright, the postwar German artists, Georg Meistermann, Ludwig Schaffrath, Johannes Schreiter, and English artist, Brian Clarke. Major findings of the study are as followings : First, stained glass has come to life again from the secular glass painting decoration in the end of the 19th century, through Art-Nouveau, De Stil, Bauhaus in the beginning of the 20th century, and L'Art $Sacr\acute{e}$. Second, Frank Lloyd Wright, the postwar German artists and Brian Clarke have established the architectural concept and potentiality of the modem stained glass in the secular field. Third, They have done by coming back to the basic creative method by traditional lead-came technique in spite of the development of various materials and techniques. Forth, stained glass fundamentally has architectural characteristics as the characters of Space, Time, Place, Context, and they have showed the new possibility of stained glass by recovery of these characters.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1252-1254
• /
• 2005

Recently, PDP barrier ribs require the formation of complex structure so that they are usually formed by etching method. For producing the fine ribs structure, during the etching process the metal ions of matrix (glass) of barrier materials should be understood on the etching mechanism with etching condition. We analyzed the quantity of Pb, Si, and B ions from the etch solution as a function of etching time.