• 보존과학연구
• /
• s.32
• /
• pp.155-170
• /
• 2011

This study intended to identify the ratio of alloy, metallographic examination and hardness on the bronze mirrors excavated in Korea and made the distribution chart of the main components according to each artifact and then tried to compare the ratio of artifacts with that of 鑑燧之齊of Zhouli Kaogongji(周禮, 考工記). Through this research, the components distribution of bronze covered a wide rage but it can be divided into 2~3 groups. When it is categorized into 3 groups, one is the bronze mirror with 70-80% of copper, 15-20% of tin and less than 5% of lead. Another is the bronze mirror with 20%-30% of tin which gives the white luster on metal and the high hardness. The other is the bronze mirror with 60-70% of copper and 15-20% of tin but it has more than 10-15% of lead which causes less luster and the low hardness. It contains less tin than 33%(50%) of tin from 鑑燧之齊 according to the old record Zhouli Kaogongji(周禮, 考工記) of Zhou Dynasty. In Korea the bronze mirror with tin of 鑑燧之齊was never found yet except the case of artifacts analyzed by non-destructive analysis.

• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.31-37
• /
• 2001

The metallurgical investigation of four lumps of bronze from the third building site of the northern workshop site at the Neungsan-ri temple site in Buyeo was performed. The microstructures of a section of sample was observed by SEM and qualitative and quantitative analysis of the sample was performed by EDS. The results are as follows: Sample 1 of the lump of bronze from northern workshop site in the third building site at Neungsan-ri temple site and sample 2 are speculated to be low-quality bronze resulting from refinery of matte which formed on the process of bronze refinery. Sample 3 is speculated as a lump of bronze which is one of Cu-Sn system and the one made by alloy only with pure bronze and tin on the process of bronze refinery. Sample 4 is confirmed as a lump of bronze which is one of Cu-Sn-Pb system from alloy of tin and lead into pure bronze. It is believed that the third building site at Neungsan-ri temple site in Buyeo produced bronze matte by refinery of copper ore or produced low-quality bronze by melting matte imported from outside.

• Journal of Korea Foundry Society
• /
• v.32 no.2
• /
• pp.91-97
• /
• 2012

The effects of Bi and Sb additions on the microstructures and casting properties in lead-free Cu-Zn-Sn broze were investigated. (1) When only Bi was added to the bronze, Bi was precipitated on the ${\delta}$ phase of ${\alpha}$ dendrite cell boundary. When Bi and Sb were added together, Bi was precipitated on the ${\delta}_A$ which was the Sb-rich area in the ${\delta}$ phase. (2) The addition of Sb accelerated the formation of ${\delta}$ phase, and when Sb, Bi and Pb were added, Bi and Pb were precipitated as mixed solution in the ${\delta}_A$ phase. (3) The combined addition of Sb and Bi resulted in the suppression of shrinkage due to the complementary effects of the mass feeding of ${\alpha}$-dendrite cluster covered with ${\delta}$ phase and sealing of micro-shrinkage in the ${\delta}$ phase by solidification expansion of Bi.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.143-148
• /
• 2010

A bronze dagger excavated from the historical site at Bongili in Gyeongju was examined for its microstructure and chemical compositions. The results show that it was forged out of the Cu-10 weight % Sn alloy having no lead. The application of forging in fabrication and the use of an unleaded alloy distinguish this artifact from other bronze daggers that have been reported in Korea, the majority of which were cast from leaded Cu-Sn alloys. This dagger is a rare and valuable archaeological material suggesting a unique bronze technology practiced in ancient Gyeongju area.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.191-197
• /
• 1992

An ancient Korean bronze dagger excavated from Yongjai-ri, Iksan-kun, presumed to be manufactured in the pre-historical age, was examined by means of chemical analysis, energy dispersive spectrometry, optical and scanning electron microscopy. Also the measurement of lead isotope ratios was carried out in order to predict the site where raw materials were produced. The composition was identified as 75.3% Cu, 17.1% Sn and 6.8% Pb which was a typical composition of Korean bronze dagger. The microstructure was consisted of ${\alpha}$ and (${\alpha}+{\delta}$) eutectoid. The (${\alpha}+{\delta}$) eutectoid can be easily corroded in comparison with ${\alpha}$. The segregation was frequently observed in the interior of the sample. According to the lead isotopes ratios, raw materials have possibility to be from North China.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.187-196
• /
• 2019

Bronzes excavated from a Gulsansa temple site in Gangneung were investigated in order to study the production of technology and provenance in this area. The bronze artifacts were discovered to consist of copper-tin or copper-tin-lead alloys using chemical analysis(EDS and EPMA). The excavated bronzes were manufactured using a casting or hammering process, and a bronze belt was gilded with gold foil. The provenance of 25 bronzes was studied using lead isotope analysis(TIMS and LA-MC-ICPMS). The results reveal the use of raw materials found near the excavated site. The object of this study was to investigate the manufacturing techniques and provenance in Gangneung without the need for a lot of data. Our results will contribute to the study of Gulsansa and bronze artifacts in Goryo(12-13th century).

• Conservation Science in Museum
• /
• v.2
• /
• pp.57-68
• /
• 2000

This study is a scientific analysis of 12 bronze materials which were excavated from Sanoisa temple in Chongju. Analysis of crystalline shape, size and distribution of the each sample metal suggested that they can be classified as tableware(wrought), vessels for memorial service(casting) and bell bronze, which is the same result as classification based on elemental composition. Most of the tableware are forging wares with composition of 8:2:0 in Cu:Sn:Pb, and vessels for memorial service are casting wares whose composition is 7:1:2 in Cu:Sn:Pb, and bell bronze's composition is Cu:Sn:Pb = 85:10:5/9:1:0. The result clearly shows that composition is closely related with usage and manufacturing method of wares. Trace elements such as Co, Fe and As are the elements with high correlation coefficient with Cu, which means they exist as impurities in Cu, and the content of As showed an increase in the order of tableware, memorial service vessels and bell bronze. In addition, the analysis of lead isotope ratio showed that 3 bronze materials with high lead content were made from the lead coming from Japan and China. The composition of the solder was Cu:Sn:Pb = 83:12:5 where small Pb crystals were distributed evenly.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.403-410
• /
• 2012

The brine treatment applied during the fabrication of forged high tin bronze objects is considered effective at the removal of surface oxide layers developed at elevated temperatures. There is not much information, however, available for the understanding of its exact effect and purpose. This work performed laboratory experiments to characterize the effect brine treatments produce on the surface of bronze objects during fabrication. Specimens were first made in the bronze shop of the Yongin folk village under varying conditions of brine treatments, and the results obtained were then used in the following laboratory experiments where the effect of brine treatments were investigated in terms of brine concentrations, alloy compositions and thermo-mechanical treatments. The results show that oxide layers generated at high temperature are easily removed by the brine treatment. It was found that the element, chlorine, played a key role in the removal of such oxide layers as opposed to the other constituent of the brine, sodium, makes no notable contribution. In bronze alloys containing 22% tin, this brine effect is obtained regardless of the application of forging as long as the brine concentration is over 0.5% based on weight. In alloys containing lead, however, no brine effect is observed due to the molten lead that emerges from inside the hot bronze specimen and forms a thin layer on its surface.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.411-420
• /
• 2009

A series of scientific analyses, including ICP-AES, microstructure, and TIMS, were carried out on 5 bronze spoons among 14 bronze artifacts excavated from the Ok-dong site in Andong, North Gyeongsang Province. The results of analysis showed that the bronze spoons were formed from an alloy of no more than 75% Cu and 21~23% Sn, placing it in the category of brassware, with trace elements such as Pb, Fe, and Zn. In particular, plumbum Pb contents of which traces of 0.04% were found, appears to have been added as an impurity during smelting. The microstructure of the bronze spoons suggests that the casting process involved using a spoon-shaped hollow mold, followed by an ropid-cooling process after the shape was perfected at approximately $586^{\circ}C$. After comparison of data measured from thermal ionization mass spectrometry (TIMS) of galena from Korea, China, and Japan, it appears that the raw materials for the bronze spoons included galena (lead sulfide) produced from the southern part of China.

• 보존과학연구
• /
• s.25
• /
• pp.5-29
• /
• 2004

This research carried out ancient technique and composition of the relics recovered from the octagonal nine-storied pagoda of Woljeongsa temple using the scientific methods and obtained the following results. Firstly, The silver sarira inner case is consists of Ag, its materials comes out near 98wt%and comparing with the relics of Hwangnamdaechong, the contents of Ag and Ni are almost same with it. Secondly, The bronze sarira outer case, its contents of Cu is almost same with pure copper of which average is 99.7wt%. So, it should be named the copper sarira outer caserather than the bronze sarira outer case that has been called. Thirdly, The bronze mirror, though the contents of tin and lead are less than other contents which have been studied, they tend to have white color so they need to be made a close study. Especially, Because cultural property of nondestructive surface analytic method is not analyzed by the analysis of cross section and the moisten analysis, it may be occurred analytical errors by other factors.