• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.53-73
• /
• 2023

Although it is mandatory to wear a seat belt that can minimize human injury when traffic accident occurs, the number of traffic accident casualties not wearing seat belts still accounts for a significant proportion.The seat belt wearing detection system for all seats is a system that identifies whether all seat passengers wear a seat belt and encourages their usage, also it can be a useful technical countermeasure. Firstly, this study established the viability of system implementation by assessing the factors influencing the severity of injuries in traffic accidents through the development of an ordered probit model. Analysis results showed that the use of seat belts has statistically significant effects on the severity of traffic accidents, reducing the probability of death or serious injury by 0.054 times in the event of a traffic accident. Secondly, a meta-analysis was conducted based on prior research related to seat belts and injuries in traffic accidents to estimate the expected reduction in accident severity upon the implementation of the system.The analysis of the effect of accident severity reduction revealed that wearing seat belts would lead to a 63.3% decrease in fatal accidents, with the front seats showing a reduction of 75.7% and the rear seats showing a reduction of 58.1% in fatal accidents. Lastly, Using the results of the meta-analysis and traffic accident statistics, the expected decrease in the number of traffic accident casualties with the implementation of the system was derived to analyze the traffic safety effects of the proposed detection system. The analysis demonstrated that with an increase in the adoption rate of the system, the number of casualties in accidents where seat belts were not worn decreased. Specifically, at a system adoption rate of 60%, it is anticipated that the number of fatalities would decrease by more than three times compared to the current scenario. Based on the analysis results, operational strategies for the system were proposed to increase seat belt usage rates and reduce accident severity.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1135-1144
• /
• 2023

Many agricultural reservoirs in South Korea, constructed before 1970, have become aging facilities. The majority of small-scale reservoirs lack measurement systems to ascertain basic specifications and water levels, classifying them as unmeasured reservoirs. Furthermore, continuous sedimentation within the reservoirs and industrial development-induced water quality deterioration lead to reduced water supply capacity and changes in reservoir morphology. This study utilized Light Detection And Ranging (LiDAR) sensors, which provide elevation information and allow for the characterization of surface features, to construct high-resolution Digital Surface Model (DSM) and Digital Elevation Model (DEM) data of reservoir facilities. Additionally, bathymetric measurements based on multibeam echosounders were conducted to propose an updated approach for determining reservoir capacity. Drone-based LiDAR was employed to generate DSM and DEM data with a spatial resolution of 50 cm, enabling the display of elevations of hydraulic structures, such as embankments, spillways, and intake channels. Furthermore, using drone-based hyperspectral imagery, Normalized Difference Vegetation Index (NDVI) and Normalized Difference Water Index (NDWI) were calculated to detect water bodies and verify differences from existing reservoir boundaries. The constructed high-resolution DEM data were integrated with bathymetric measurements to create underwater contour maps, which were used to generate a Triangulated Irregular Network (TIN). The TIN was utilized to calculate the inundation area and volume of the reservoir, yielding results highly consistent with basic specifications. Considering areas that were not surveyed due to underwater vegetation, it is anticipated that this data will be valuable for future updates of reservoir capacity information.

• Journal of the Korean Society of Radiology
• /
• v.17 no.5
• /
• pp.641-649
• /
• 2023

This study compares and analyzes the performance of a shield manufactured using 3D printing technology to find out its applicability as a shield in high-energy electron beam therapy. Actual measurement and monte carlo simulations were performed to evaluate the shielding performance of 3D printing materials for high-energy electron beams. First, in order to secure reliability for the simulation, a source term evaluation was conducted by referring to the IAEA's TRS-398 recommendation. Second, to analyze the shielding performance of PLA+W (93%), a specimen was manufactured using a 3D printer, and the shielding rate by thickness according to electron beam energy was evaluated. Third, the shielding thickness required for electron beam treatment was calculated through a comparative analysis of shielding performance between PLA+W (93%) and existing shielding bodies. First, as a result of the evaluation of the source term through actual measurement and simulation, the TRS-398 recommendation was satisfied with an error of less than 1%, thereby securing the reliability of the simulation. Second, as a result of the shielding performance analysis for PLA+W (93%), 6 MeV electron beams showed a shielding rate of more than 95% at 3.12 mm, and 15 MeV electron beams showed a shielding rate of more than 90% at 10 mm thickness. Third, through simulations, comparative analysis between PLA+W (93%) materials and existing shields showed high shielding rates within the same thickness in the order of tungsten, lead, copper, PLA+W (93%), and aluminum. 6 MeV electron beams showed almost similar shielding rates at 5 mm or more and 15 MeV electron beams. Through this study in the future, it is judged that it can be used as basic data for the production and application of shielding bodies using PLA+W (93%) materials in high-energy electron beam treatment.

• Clean Technology
• /
• v.29 no.4
• /
• pp.288-296
• /
• 2023

Coal is abundantly available compared to other energy sources and is used as a versatile energy resource worldwide. To address the environmental issues stemming from conventional coal utilization, efforts are underway to develop clean coal utilization technologies, with IGCC technology being a notable example. In IGCC plants, coal is subjected to a CMD process where both drying and pulverization are achieved by supplying hot air. However, if the temperature of the supplied hot air is excessively high, it can lead to devolatilization and spontaneous combustion, thereby compromising the stable operation of the CMD process. This study aimed to measure the devolatilization and spontaneous combustion temperatures of different types of bituminous coal, and to explore their correlations with the characteristics of the coals. Six coal types exhibited devolatilization between 350 and 400 ℃, while three coal types showed devolatilization at temperatures exceeding 400 ℃. Spontaneous combustion ℃curred in one coal type below 100 ℃, six coal types between 100 and 150 ℃, and two coal types above 150 ℃. The measured initiation temperatures were compared with the coal characteristics including the oxygen, moisture, Fe₂O₃, and CaO content, the H/C ratio, and the O/C ratio to establish correlations. Regression analysis was used to calculate the regression coefficients and determination coefficients for each ignition temperature. It was found that 52.44% of the FC/VM data significantly influenced the volatile matter ignition temperature, and 59.10% of the Fe₂O₃ data significantly affected the spontaneous combustionignition temperature.

• Korean Journal of Cognitive Science
• /
• v.34 no.3
• /
• pp.181-196
• /
• 2023

Size, velocity, and time equivalence are mechanisms that allow us to perceive objects in three-dimensional space consistently, despite errors on the two-dimensional retinal image. These mechanisms work on common cues, suggesting that the perception of motion distance, motion speed, and motion time may share common processing. This can lead to the hypothesis that, despite the spatial nature of visual stimuli distorting temporal perception, the perception of motion speed and the perception of motion duration will tend to oppose each other, as observed for objects moving in the environment. To test this hypothesis, the present study measured perceived speed using Müller-Lyer illusion stimulus to determine the relationship between the time-perception consequences of motion stimuli observed in previous studies and the speed perception measured in the present study. Experiment 1 manipulated the perceived motion trajectory while controlling for the retinal motion trajectory, and Experiment 2 manipulated the retinal motion trajectory while controlling for the perceived motion trajectory. The result is that the speed of the inward stimulus, which is perceived to be shorter, is estimated to be higher than that of the outward stimulus, which is perceived to be longer than the actual distance traveled. Taken together with previous time perception findings, namely that time perception is expanded for outward stimuli and contracted for inward stimuli, this suggests that when the perceived trajectory of a stimulus manipulated by the Müller-Lyer illusion is controlled for, perceived speed decreases with increasing duration and increases with decreasing duration when the perceived distance of the stimulus is constant. This relationship suggests that the relationship between time and speed perceived by spatial cues corresponds to the properties of objects moving in the environment, i.e, an increase in time decreases speed and a decrease in time increases speed when distance remains the same.

• Journal of the Daesoon Academy of Sciences
• /
• v.46
• /
• pp.69-122
• /
• 2023

This study is an integral exploration of Feng Shui associated with the area around the birthplace of Kang Jeungsan, a sacred site of Daesoon Jinrihoe which holds that the Supreme God descended in human form at that location (through Kang Jeungsan). Through an on-site Feng Shui survey, the main focus of the research method was to explore the Feng Shui configurations around Kang Jeungsan's birthplace especially as it pertains to the connections among geomagnetic veins which lead to the Mount Shiru area. As a method of investigation, this study explored the Feng Shui of Gaekmang-ri Village and the geomantic veins leading up to Mount Shiru. This involved examining the landforms, topography, water flow, and geomantic veins of the area to reveal the overall Feng Shui configurations. Throughout the course of that on-site survey, this study first examined Mount Duseung and Mount Bangjang, also known as Mount Yeongju (sometimes collectively known as Mount Samshin), Mount Dongjuk, Mount Mangje-bong, Mount Maebong, and Mount Shiru. Then, this study stated some of the underlying issues through a scholarly approach based on various theories such as traditional geographical texts and theories on mountain-growth and water-flow from the perspective of Feng Shui. In particular, attention was paid to theoretical aspects of the uninterrupted and undulating flow of the terrain leading to Shiru Mountain. As a result, from a Feng Shui point of view, the connected network geomantic veins in the area of Kang Jeungsan's birthplace and the feng shui features and conditions were all examined through an on-site survey. The survey results revealed that the area forms a large Feng Shui site due to the vast interconnectivity among all the mountains that extend from the Honam vein and form organic relationships with one another. This even includes Mount Samshin in Honam. Considering the geographical conditions that formed a site that enabled harmony between divine beings and humankind, the surrounding place names also provide allusions to the understanding of the birth of Kang Jeungsan as the descent of Supreme God into the human world through the historical figure, Kang Jeungsan. This area is an ideal spot with a propitious spatial arrangement in terms of its Feng Shui. Feng Shui analysis reveals the site to be a place that holds an earth energy-hub transmitting a great energy of nature that cannot be measured by human power alone.

• Korean Journal of Culture and Social Issue
• /
• v.8 no.1
• /
• pp.103-139
• /
• 2002

Korean society has significantly changed with the onset of a dramatic economic crisis in 1998. From 2000, however, the Korean economy has recovered and currently Korea is enjoying a similar standard of living and economic growth as the pre-1998 levels. This study is a follow-up analysis, comparing the results examining the success attribution of Korean students and adults in 2001 with the results obtained before the economic crisis in 1997. Using the indigenous psychological approach, this study compares the similarities and differences in Korean students and adults' attribution of their personal success before and after the economic crisis. A total of 988 participants, consisting of 481 primary, junior high, senior high and university students and 507 adults (236 fathers and 271 mothers of the students) completed the questionnaire developed by Kim and Park (1998). The results indicate that students perceived their academic achievement and adults perceived successful family life as their most proud achievement. Successful family life included items such as academic success of children, healthy development of their children, and harmonious family life. The person who provided the most significant support for students were parents and for adults, it was their spouse. For students, the importance of friends' social support increased during the high school years. In terms of type of social support, emotional support was reported to be the most important for both students and adults. As for the reason for their success, majority of students and men reported self-regulation and for women, supportive family environment was reported as being the most important. Comparing 2001 results with the 1997 results, the importance of family increased after the economic crisis. Even with the dramatic economic crisis, however, some of the underlying pattern remain strong (such as importance of academic achievement for students, family life for adults, the importance of social support, especially emotional social support from family members, and believing that self-regulation would lead to success). The similar pattern of results obtain before and after the economic crisis indicate that the above results reflect a fundamental values and belief system deeply imbedded in Korean mentality.

• Conservation Science in Museum
• /
• v.30
• /
• pp.23-46
• /
• 2023

The Jija Chongtong Gun, owned by Seokdang Museum of Dong-A University, is a tubedstyle heavy weapon of the battlefield in the mid-Joseon Dynasty and is the second largest firearm after Cheonja Chongtong. The original surface color of the Jija Chongtong Gun was obscured by foreign substances and therefore it was judged that its condition requires the conservation treatment. For stable conservation treatment, gamma ray and X-ray non-destructive transmission surveys was conducted to determine the internal structure and conservation condition. And the component analysis on the material components and surface contaminants of Jija Chongtong Gun was conducted by utilizing the p-XRF component analysis, SEM-EDS component analysis, and XRD analysis. As a result of the gamma-ray and X-ray non-destructive transmission investigation, a large amount of air bubbles was observed inside Jija Chongtong Gun, and the part that appeared to be a chaplet by visual observation was not identified. As a result of gamma-ray and p-XRF component analysis, it was confirmed that Jija Chongtong Gun was bronze made of copper (Cu), tin (Sn), and lead (Pb) alloy. As a result of surface analysis of foreign substances using SEM-EDS, it was confirmed that the main components of white foreign substances were calcium (Ca), sulfur (S), and titanium (Ti). Titanium was presumed to be titanium dioxide (TiO₂), the main component of white correction fluid. The red foreign substance was confirmed to contain barium (Ba) as its main ingredient, and was presumed to be barium sulfate (BaSO₄), an extender pigment in paint. White and red contaminants, mainly composed of titanium and barium, are presumed to have been deposited on the surface in recent years. The yellow foreign substances were confirmed to be aluminum (Al) and silicon (Si), and were presumed to have originated from soil components. As a result of SEM-EDS and XRD component analysis, the white foreign substance was confirmed to be gypsum (CaS). Based on the results of component analysis, surface impurities were removed, stabilization treatment, and strengthening treatment were performed. During the conservation process, unknown inscriptions Woo (右), Byeong (兵), Sang (上), and Yi (二) were discovered through a portable microscope and precise 3D scanning. In addition, the carving method, depth, and width of the inscription were measured. Woo Byeong Sang is located above Happo Fortress in Changwon, and Yi can be identified as the second hill.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.185-196
• /
• 2023

This paper investigates the effects of entrepreneurs' cognitive biases on business opportunity evaluation, given their strong entrepreneurial spirit, which is characterized by innovation, proactivity, and risk-taking. When making decisions related to business activities, entrepreneurs typically make rational judgments based on their knowledge, experience, and the advice of external experts. However, in situations of extreme stress or when quick decisions are required, they often rely on heuristics based on their cognitive biases. In particular, we often see cases where entrepreneurs fail because they make decisions based on heuristics in the process of evaluating and selecting new business opportunities that are planned to guarantee the growth and sustainability of their companies. This study was conducted in response to the need for research to clarify the effects of entrepreneurs' cognitive biases on new business opportunity evaluation, given that the cognitive biases of entrepreneurs, which are formed by repeated successful experiences, can sometimes lead to business failure. Although there have been many studies on the effects of cognitive biases on entrepreneurship and opportunity evaluation among university students and general people who aspire to start a business, there have been few studies that have clarified the relationship between cognitive biases and social networks among entrepreneurs. In contrast to previous studies, this study conducted empirical surveys of entrepreneurs only, and also conducted research on the relationship with social networks. For the study, a survey was conducted using a parallel survey method using online mobile surveys and self-report questionnaires from 150 entrepreneurs of small and medium-sized enterprises. The results of the study showed that 'overconfidence' and 'illusion of control', among the independent variables of entrepreneurs' cognitive biases, had a statistically significant positive(+) effect on business opportunity evaluation. In addition, it was confirmed that the moderating variable, social network, moderates the effect of overconfidence on business opportunity evaluation. This study showed that entrepreneurs' cognitive biases play a role in the process of evaluating and selecting new business opportunities, and that social networks play a role in moderating the structural relationship between entrepreneurs' cognitive biases and business opportunity evaluation. This study is expected to be of great help not only to entrepreneurs, but also to entrepreneur education and policy making, by showing how entrepreneurs can use cognitive biases in a positive way and the influence of social networks.