• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.5
• /
• pp.407-412
• /
• 2011

Purpose: The purpose of the present study was to evaluate the postoperative skeletal stability of two-jaw surgery (Le Fort I osteotomy and bilateral sagittal split ramus osteotomy) via surgery first orthodontic treatment (SFOT) in class III malocclusion. Methods: Thirty-two patients who had two-jaw surgery via SFOT were included in this study. Serial lateral cephalograms were obtained before (T0), immediately after (T1), and six months after (T2) surgery. Twelve variables were measured for horizontal and vertical skeletal stability as well as for dental change. All measurements were evaluated statistically by a paired t-test ($P$ <0.05). Results: The mean skeletal changes were $0.1{\pm}2.5$ mm at point A and $-12.0{\pm}7.4$ mm at the pogonion. The mean horizontal relapse was 11.6% at the pogonion, and the mean vertical surgical changes included an upward displacement of $2.1{\pm}7.1$ mm and a forward displacement of $1.4{\pm}4.6$ mm at the pogonion. Upper incisor inclination decreased after surgery and was maintained at T2, and lower incisors were proclined from T1 to T2 by postsurgical orthodontic treatment. Conclusion: Postoperative skeletal stability of two-jaw surgery via surgery first orthodontic treatment in class III malocclusion was clinically acceptable.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.137-143
• /
• 2011

Purpose: Orthognathic surgery is required in patients with severe skeletal disharmony and facial asymmetry, which results in functional and esthetic improvement. Recently, bimaxillary surgery has become generalized. Establishment of the occlusal plane among several other factors included in the surgery plan is a major consideration for the diagnosis and treatment plan and it is also an important factor for postoperative stability. Methods: In this study, we assessed postoperative stability of occlusal plane, B-point, and pogonion point on 20 patients who underwent two-jaw surgery in the Chosun Dental Hospital from 2000 to 2007. Preoperative and postoperative states and at least a one year postoperative follow-up were compared. Results: The postsurgical relapse volume of the occlusal plane to the SN plane and the FH plane was $-0.26{\pm}2.8^{\circ}$ and $-0.44{\pm}3.29^{\circ}$, respectively and after two-jaw surgery, the stability of occlusal plane was maintained. The horizontal relapse degree was $0.85{\pm}0.46$ mm and $0.76{\pm}0.48$ mm, respectively, and the vertical relapse degree was $1.16{\pm}0.36$ mm and $1.13{\pm}0.71$ mm of the B point and the Pogonion point at the time after minimal 1 year. Conclusion: The vertical relapse amount was shown to be slightly larger than the horizontal relapse amount.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.2
• /
• pp.9-20
• /
• 1990

A series of 19 cases with maxillary hyperplasia and mandibular retrognathia were operated on by simultaneous superior repositioning of the maxilla after Le Fort I osteotomy and anterior repositioning of the mandible after bilateral sagittal split ramus osteotomies with or without osteotomy of the inferior border of the mandible. These were evaluated by retrospective cephalometric and computer analysis for the longitudinal skeletal and dental changes for an average of 17.1 months after surgery. For stabilization of the osteotomized segments, the authors used wire osteosynthesis by means of bilateral infraorbital and zygomatic buttress suspension wire at the maxilla, and direct interosseous wire at the split segments of the mandibular rami. Results show generally good stability after simultaneous maxillary and mandibular surgery with wire osteosynthesis, and a minimal to moderate tendency toward skeletal and dental relapse. This article is a preliminary study to defy the efficiency of the wire osteosynthesis (wo)compared with rigid internal fixation (RIF) for simultaneous maxillary and mandibular surgery. 1. The vertical relapse rate of the A point after superior repositioning of the maxilla is 2.2%. 2. The horizontal relapse rate of the B point after advancement of the mandible is 18.3%. 3. The condyle is distracted inferiorly and slightly posteriorly at the immediate postoperative period. 4. At the long term follow up examination, the condyle presents tendency of return to the preoperative position. 5. Condylar segment angle is decreased at the immediate postoperative period, and at the long term follow up evaluation, the angle is increased. 6. Gonial angle is increased at the immediate postoperative period, and then is decreased at the long term follow up evaluation. 7. The dentition is satisfactory with acceptable movement at the long term follow up evaluation. 8. At the mandibular free body analysis, genioplasty shows good stability. 9. Wire osteosynthesis provides excellent stabilization for the simultaneous maxillary and mandibular surgery.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.5
• /
• pp.295-300
• /
• 2018

Background: Removal of the plate following Le Fort I osteotomy and BSSO (bilateral sagittal split osteotomy) is a common procedure. However, patients who undergo plate removal experience intense pain and discomfort. This study investigated the half-maximal effective concentration ($Ce_{50}$) of remifentanil in the prevention of plate removal pain under sedation using dexmedetomidine. Methods: The study evaluated 18 patients, between 18 and 35 years of age, scheduled for elective surgery. Remifentanil infusion was initiated after sedation using dexmedetomidine, and started at a dose of 1.5 ng/mL on the first patient via target-controlled infusion (TCI). Patients received a loading dose of $1.0{\mu}g/kg$ dexmedetomidine over 10 min, followed by a maintenance dose of $0.7{\mu}g/kg/h$. When the surgeon removed the plate, the patient Modified Observer's Assessment of Alertness/Sedation (MOAA/S) score was observed. Results: The Ce of remifentanil ranged from 0.9 to 2.1 ng/mL for the patients evaluated. The estimated effect-site concentrations of remifentanil associated with a 50% and 95% probability of reaching MOAA/S score of 3 were 1.28 and 2.51 ng/mL, respectively. Conclusion: Plate removal of maxilla can be successfully performed without any pain or adverse effects by using the optimal remifentanil effect-site concentration ($Ce_{50}$, 1.28 ng/mL; $Ce_{95}$, 2.51 ng/mL) combined with sedation using dexmedetomidine.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.1
• /
• pp.1-13
• /
• 1997

Preoperative and postoperative TMJ symptoms were observed in mandibular prognathism of 30 patients operated on by Le Fort I osteotomy and intraoral vertical ramus osteotomy. The alterations of TMJ symptoms were investigated and the relationship between changes of TMJ symptoms and some cephalometric values including occlusal plane angle, mandibular plane angle, posteior ramal height and a degree of deviation of mandibular incisor midline to facial midline were observed. The results are as follows. The incidence of patient with TMJ symptoms before orthognathic surgery was 40% and after orthognathic surgery was 20%. The most frequetly encountered symptoms in orthognathic TMJ dysfunction patients were TMJ pain and/or clicking. After surgery 66% of the preoperative symptomatic patients reported improvement TMJ symptoms. On the orther hand 2 patient (6%) of the preoperative asymptomatic patients developed TMJ symptoms after surgery. Preoperatively, 60% of the facial asymmetric patients with mandibular prognathism had TMJ symptomas. The more severe facial asymmetry was, the higher incidence of TMJ symptoms was. The alteration of occlusal plane angle and mandibular plane angle seems to be one of the contributing factors which make to change TMJ symptoms in orthognathic patients. But its amount seems to be low significance. Increase or decrease of posterior ramal height have influence on the change of TMJ symptoms.

• The korean journal of orthodontics
• /
• v.45 no.1
• /
• pp.3-12
• /
• 2015

Objective: We compared the skeletal and dental changes that resulted from the use of two methods of intermaxillary fixation (IMF)-miniscrews and surgical archwire-in 74 adult patients who had Class III malocclusion and were treated with the same orthognathic surgical procedure at a hospital in Korea. Methods: All the patients underwent Le Fort I osteotomy and bilateral sagittal split ramus osteotomy with rigid fixation. They were divided into two groups according to the type of IMF used-group 1 underwent surgical archwire fixation and group 2 underwent orthodontic miniscrew fixation. In a series of cephalograms for each patient, we compared vertical and horizontal tooth-position measurements: (a) immediately after surgery ($T_0$), (b) 3 months after surgery ($T_1$), and (c) 6 months after surgery ($T_2$). Cephalometric changes within each group were examined using one-way analysis of variance (ANOVA) while the independent samples t -test procedure was used to compare the two groups. Results: After surgery, the maxillary incisors tended to be proclined in both groups although there were no significant differences. Incisor overbite increased significantly in both groups from $T_0$ to $T_1$, and the miniscrew group (group 2) showed slightly greater overbite than the archwire group (group 1). Conclusions: This study suggest that the use of orthodontic miniscrews and orthodontic surgical archwire for IMF in adult patients results in similar skeletal and dental changes.

• The korean journal of orthodontics
• /
• v.43 no.1
• /
• pp.42-52
• /
• 2013

The aim of this paper was to propose a new method of bimaxillary orthognathic surgery planning and model surgery based on the concept of 6 degrees of freedom (DOF). A 22-year-old man with Class III malocclusion was referred to our clinic with complaints of facial deformity and chewing difficulty. To correct a prognathic mandible, facial asymmetry, flat occlusal plane angle, labioversion of the maxillary central incisors, and concavity of the facial profile, bimaxillary orthognathic surgery was planned. After preoperative orthodontic treatment, surgical planning based on the concept of 6 DOF was performed on a surgical treatment objective drawing, and a Jeon's model surgery chart (JMSC) was prepared. Model surgery was performed with Jeon's orthognathic surgery simulator (JOSS) using the JMSC, and an interim wafer was fabricated. Le Fort I osteotomy, bilateral sagittal split ramus osteotomy, and malar augmentation were performed. The patient received lateral cephalometric and posteroanterior cephalometric analysis in postretention for 1 year. The follow-up results were determined to be satisfactory, and skeletal relapse did not occur after 1.5 years of surgery. When maxillary and mandibular models are considered as rigid bodies, and their state of motion is described in a quantitative manner based on 6 DOF, sharing of exact information on locational movement in 3-dimensional space is possible. The use of JMSC and JOSS will actualize accurate communication and performance of model surgery among clinicians based on objective measurements.

• The korean journal of orthodontics
• /
• v.54 no.2
• /
• pp.128-135
• /
• 2024

Objective: The number of three-piece maxillary osteotomies has increased over the years; however, the literature remains controversial. The objective of this study was to evaluate the skeletal stability of this surgical modality compared with that of one-piece maxillary osteotomy. Methods: This retrospective cohort study included 39 individuals who underwent Le Fort I maxillary osteotomies and were divided into two groups: group 1 (three pieces, n = 22) and group 2 (one piece, n = 17). Three cone-beam computed tomography scans from each patient (T1, pre-surgical; T2, post-surgical; and T3, follow-up) were used to evaluate the three-dimensional skeletal changes. Results: The differences within groups were statistically significant only for group 1 in terms of surgical changes (T2-T1) with a mean difference in the canine region of 3.09 mm and the posterior region of 3.08 mm. No significant differences in surgical stability were identified between or within the groups. The mean values of the differences between groups were 0.05 mm (posterior region) and -0.39 mm (canine region). Conclusions: Our findings suggest that one- and three-piece maxillary osteotomies result in similar post-surgical skeletal stability.

• The korean journal of orthodontics
• /
• v.54 no.4
• /
• pp.247-256
• /
• 2024

Objective: This retrospective study evaluated the mandibular condyle position before and after bimaxillary orthognathic surgery performed with the mandibular condyle positioned manually in patients with mandibular prognathism using cone-beam computed tomography. Methods: Overall, 88 mandibular condyles from 44 adult patients (20 female and 24 male) diagnosed with mandibular prognathism due to skeletal Class III malocclusion who underwent bilateral sagittal split ramus osteotomy (BSSRO) and Le Fort I performed using the manual condyle positioning method were included. Cone-beam computed tomography images obtained 1-2 weeks before (T0) and approximately 6 months after (T1) surgery were analyzed in three planes using 3D Slicer software. Statistical significance was set at P < 0.05 level. Results: Significant inward rotation of the left mandibular condyle and significant outward rotation of the right mandibular condyle were observed in the axial and coronal planes (P < 0.05). The positions of the right and left condyles in the sagittal plane and the distance between the most medial points of the condyles in the coronal plane did not differ significantly (P > 0.05). Conclusions: While the change in the sagittal plane can be maintained as before surgery with manual positioning during the BSSRO procedure, significant inward and outward rotation was observed in the axial and coronal planes, respectively, even in the absence of concomitant temporomandibular joint disorder before or after the operation. Further long-term studies are needed to correlate these findings with possible clinical consequences.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.50 no.4
• /
• pp.235-240
• /
• 2024

Lipomas, the most common soft-tissue mesenchymal neoplasms in adults, are characterized by the proliferation of mature white adipocytes without cytologic atypia. Lipomas are rarely observed in the head and neck region. We present a case of resection and orthognathic surgical removal of an intramuscular lipoma of the mandible with involvement of the mandibular ramus and condylar head and neck. An 18-year-old female patient was referred to our hospital for orthognathic surgery for the management of facial asymmetry and mandibular prognathism. The patient did not present with facial swelling, pain, or temporomandibular dysfunction; however, on radiographic examination, including cone-beam computed tomography and magnetic resonance imaging, an infiltrative fatty lesion was observed in the masticator space inside the right mandible, and the adjacent mandible exhibited bone thinning and deformity. Resection of the lipoma was performed along with orthognathic surgery, including a Le Fort I osteotomy for the maxilla and bilateral sagittal split ramus osteotomy (BSSRO). In this case, because the ramus was split using BSSRO, accessing the lipoma intraorally was easy. Consequently, aesthetic scarring was avoided, and no complications, such as unfavorable splitting or pathologic fracture, occurred. Although recurrence has not been observed about 1 year, long-term follow-up should be performed.