• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.569-573
• /
• 2008

In this thesis, the drawing was prepared for the strip layout of the pickup frame In the press die, the drawing for press layout is a major factor in determining the mass production of the product. The 3D CAD/CAM system was applied to easily correct interference factors with other parts to be mounted. This study improved the material utilization ratio to 28.49% by optimizing the blank layout and strip layout in wide-width arraying. The 3D CAD/CAM software used is Unigraphics NX 4.0, and the strip layout drawing was prepared in 12 processes.

• Korean Institute of Interior Design Journal
• /
• no.7
• /
• pp.38-44
• /
• 1996

To improve and replete many problems which are discovered the present condition and cases of interior architecture education previously, 1) Adopted the sixth semester, the ninth semester of 3 -year course of study as a reform of the school system. 2) Building up Design -basic understandings of design , Design Resources -layout course, factor course and Design Communication three -steps of systematic -educational course of methodical course fro transmitting and 3) Classifying interior space designer , interior factor designer, interior decorator, special -space designer as practical parts. 4) Divided three fields : layout, construction work, factor design , related to interior design works. 5) Also, divided like (Table-2), job-analysis and formation of relating course into layout and construction work. 6) Analyzed and (Table-3) the present condition of four domestic Junior college (Seoul and kyong -ki areas) as a case study. 7) Analyzed and surveyed (Table-4) three American colleges, sixth semester and ninth semester of three year course of study and 8) Have to solidify practical computer education, foreign language education as the terms desired keeping pace with internationalization and the changes of opening periods. 9) As above-mentioned, reenforcing the fundamental education of lower grades and needs fractionizing special education of higher grades. Finally, needs to be prepared the environments which enable to develop the marked educational goals & contents and then be exeucted, which make one do his responsibility after setting out in the world, satisfying a periods wishies : many competent experts that can be produced.

• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.285-296
• /
• 2014

The objective of optimization is to present a design process that minimizes the total material consumption while satisfying current codes and specifications. In the research an optimization formulation for RC shear wall structures is proposed. And based on conceptual design methodology, an optimization process is investigated. Then optimal design techniques and specific explanations are introduced for residential buildings with shear wall structure, especially for that with a rectangular layout. An example of 30-story building is presented to illustrate the effectiveness of the proposed optimal design process. Furthermore, the influence of aspect ratio on the concrete consumption and the steel consumption of the superstructure are analyzed for this typical RC shear wall structure; and their relations are obtained by regressive analysis. Finally, the optimal material consumption is suggested for the residential building with RC shear wall structure and with rectangular layout. The relation and the data suggested can be used for guiding the design of similar RC shear wall structures.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.86-93
• /
• 2003

Korean traditionally prefer a house with a southern exposure to other styles. Moreover, pretty part of dwelling style in Korea is apartment building. But generally, there are much more north oriented rooms than opposite one in apartment. Generally, most Korean tends to consider the direction of the room as an important factor to decide the arrangement of their furniture. Also, the location of window, door, bed, and closet can affect on the decision-making process of furniture layout. So, the closet position should be determined by not only window direction and door position, but also the furniture arrangement preference of residents. After considering the window and door position, there are 16 alternatives in a room. (Multiplied 4 window directions by 4 door positions under the assumption that the window and the door cannot be on the same side of the wall.) Also, this study analyzed each room style ratio considering the symmetry of each plan by comparing the apartment building plan. This paper studied the bedroom style by analyzing the 180 apartment building plans and survey of furniture layout; the furniture in this study represents bed and desk those are mainly laid in Korean bedroom. Finally, this paper suggested the methodology to find optimal alternatives of furniture and closet layout for high-rise apartment residents, based on the door and window position, and the furniture layout preference of residents.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.751-761
• /
• 2015

A multi-platform offshore wind farm is receiving the worldwide attention for the sake of maximizing the wind power capacity and the dynamic stability at sea. But, its wind power efficiency is inherently affected by the interference of wake disturbed by the rotating blades, so its layout should be appropriately designed to minimize such wake interference. In this context, the purpose of this paper is to introduce a layout optimization for multi-platform offshore wind farm consisted of 2.5MW spar-type floating wind turbines. The layout is characterized by the arrangement type of wind turbines, the spacing between wind turbines and the orientation of wind farm to the wind direction, but the current study is concerned with the spacing for a square-type wind farm oriented with the specific angle. The design variable and the objective function are defined by the platform length and the total material volume of the wind farm. The maximum torque loss and overlapping section area are taken as the constraints, and their meta-models expressed in terms of the design variable are approximated using the existing experimental data and the geometry interpretation of wake flow.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 1998.04a
• /
• pp.14-15
• /
• 1998

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1191-1195
• /
• 2009

We present the efficient test wrapper design methodology considering the layout distance of scan chain. To test the scan chains in SoC, the scan chains must be assigned to external TAM(Test Access Mechanism) lines. The scan chains in IP were placed and routed without any timing violation at normal mode. However, in test mode, the scan chains have the additional layout distance after TAM line assignment, which can cause the timing violation of flip-flops in scan chains. This paper proposes a new test wrapper design considering layout distance of scan chains with timing violation free.

• Journal of Navigation and Port Research
• /
• v.33 no.7
• /
• pp.477-482
• /
• 2009

In this paper the order picking problem in warehouses is considered, a topic which has received considerable attention from the international academic body in recent years. The order picking problem deals with the retrieval of order items from prespecified locations in the warehouse, and its objective is usually the minimization of travel time or travel distance. Hence, a well-thought order picking policy in combination with an appropriate storage policy will enhance warehouse efficiency and reduce operational costs. This paper starts with a literature overview summarizing approaches to routing order pickers, assigning stock-keeping units to pick locations and designing warehouse layouts. Since the layout design might affect both storage and routing policies, the three factors are interdependent with respect to order picking performance. To test these interdependencies, a simulation experiment was set up, involving two types of warehouse layout, four types of storage policy, five well-known heuristics and five sizes of order picking list. Our results illustrate that from the point of view of order picking distance minimization it is recommended to equip the warehouse with a third cross aisle, although this comes at the cost of a certain space loss. Additionally, we propose a set of most appropriate matches between order picking heuristics and storage policies. Finally, we give some directions for further research and recommend an integrated approach involving all factors that affect warehouse efficiency.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.811-818
• /
• 2004

This report was studied about the design of formation and layout of major components of double deck train operated at main line of the domestic. And we carried out the basic design of train formation, the layout of propulsion system and brake system and studied about the performance of train traction and brake system of double deck train.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.142-145
• /
• 2003

When we search information on the Web using search engines, they only analyze the text information collected from the source files of Web pages. However, there is a limit to analyze the layout of a Web page only from its source file, although Web page design is the most important factor for a user to estimate a page. In particular it often happens on the Web that the pages of similar design ofter similar information. We propose a method to analyze layout for comparing the design of pages by treating the displayed page as image.