• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.223-224
• /
• 2006

This paper present a new disk-type piezoelectric transformer. The input side of the transformer has a crescent-shaped electrode and the output side has a focused poling direction. This transformer has multi-layered structure. The piezoelectric transformers operated m each transformer's resonance vibration mode. The electrodes and poling directions on commercialy available piezoelectric ceramic disks were designed so that the planar or shear mode coupling factor ($k_p,\;k_{15}$) becomes effective rather than the transverse mode coupling factor ($k_{31}$). The Resonance frequency is 65.22[kHz] and maximum voltage step-up ratio is 149. Multi-layered transformer has better efficiency and step-up ratio than the single-layered transformer.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.241-246
• /
• 2012

A layered planer SOFC module was designed from planar-type SOFC. It was prepared by multi-layered ceramic technology. To form the cathode and the anode in the layered structure, reliable channels should be made on the both side of electrolyte perpendicularly. However, monolithic SOFC using multi-layered ceramic technology hasn't been studied another group, and the warpage of electrolyte in the channel, also, hasn't been studied, when electrode is printed on the electrolyte. In this study, the channels are prepared with electrode printing, and their warpage are evaluated. In the case of YSZ without electrode, the warpages are nothing in the limit of measurement using optical microscope. The warpage of 'YSZ-NiO printed' increases than that of 'NiO printed', and also, the case of 'double electrode printed' is similar to 'YSZ-NiO printed'. It is thought that, in the printed electrolyte, the warpage is related to the difference of the sintering behavior of each material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.107-108
• /
• 2015

Layered Double Hydroxides is known as a hydrotalcite-like material. It is a type of anionic clay with planar structure. It is composed of layer structure which is able to exchange anion between two layers which includes divalent ion and trivalent ion. Therefore, layered double hydroxide is applicable for eliminating harmful heavy metals and anionic substances which exist in the concrete. Because it is also able to be used as catalyst and has high possibility of utilization, It is getting an large amount of attention recently. In this study, an analysis on the structure of the layerd double hydroxide (LDH) which is possible to bind the anion was carried out.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.866-870
• /
• 2014

In solid oxide fuel cell system, yttria-stabilized zirconia is generally adopted as the electrolyte, which has high strength and superior oxygen ion conductivity, and the air electrode and the fuel electrode are attached to this. Recently, new structure of 'layered planar SOFC module' was suggested to solve the reliability problem due to the high temperature stability of a sealing agent and a binding material. In this study to materialize the air electrode in a layered planar SOFC module, the LSM ink was coated to form homogeneous electrode in the channel after the ink preparation. As the porosity control agent, PMMA or active carbon powder was adopted with use of a commercial dispersant in ethanol. The optimal amounts of both the porosity control agents and the dispersant were determined. Four (4) vol% of the dispersant for the LSM-PMMA case and 15 vol% for LSM-carbon powder showed the lowest viscosities respectively to indicate the best dispersed states of the slurries. With PMMA and carbon powder, sintered LSM ink shows the relatively homogeneous distributions of pores and with increases of the agents, the porosities increased in both cases. From this, it can be thought that the amount of the PMMA or carbon powder could be used to control the porosity of the LSM ink.

• 한국전기전자재료학회논문지
• /
• 제25권7호
• /
• pp.552-557
• /
• 2012

In this study, we have coated the inner surface of YSZ channel using LSM powder ink through depressurization process for making the cathode of a stacked planar-type SOFC module. To coat the surface of YSZ channel uniformly, we tried to find the optimum manufacturing condition for LSM ink. We used four different dispersants (BYK series) and two different solvents (ethanol and DMF) to make the LSM ink. It was revealed that the ink made with the ethanol solvent and the BYK-111 dispersant has the lowest viscosity, relatively low contact angle and most excellent dispersibility. After depressurizing a chamber filled with LSM ink and sintered YSZ channel, we have found that the YSZ channel was uniformly coated with LSM cathode. The LSM ink with 25 vol% BYK-111 showed the most uniform coating.

• 정보통신설비학회논문지
• /
• 제4권1호
• /
• pp.31-36
• /
• 2005

In this paper, a planar type bandpass filter in multilayered PCB is presented. The multilayered PCB structure has some advantages on fabricating microwave devices such as the size reduction and ability of tight coupling by folding or embedding. The proposed BPF has two transmission zeros at the both sides of the center frequency by using independent electric and magnetic coupling structure. The designed BPF with four layer teflon PCBs of dielectric constant 2.94 has dimensions of 24x20x1.524 in mm, center frequency of 2.47GHz and bandwidth of about l00MHz. A good agrement is achieved between the measured result and the simulated one. The influences of air gaps between the layers are also analyzed and presented.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.403-406
• /
• 2011

Here we report Airy beams coupled with waveguide modes. These waveguide Airy (WAiry) beams propagate through layered planar structures inheriting the characteristics of waveguide modes as well as those of Airy beams, such as diffraction-free and accelerating features. In particular, we focus on the WAiry beams associated with backward waveguide modes, showing that the backward feature can alter the trajectories of the WAiry beams significantly. Based on this, we propose a new scheme of waveguide-type polarization/power beam splitters.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.37-41
• /
• 2021

본 논문에서는 UWB 센서에 응용 가능한 다층기판을 이용한 광대역 특성을 가지는 보우타이 안테나를 설계하였다. 제안된 소형 보우타이 안테나는 2층의 기판으로 설계 및 제작되었으며 전체 안테나의 두께는 4.5mm이다. 제안된 안테나는 보우타이 모양의 방사체와 평면형 발룬으로 구성된다. 설계된 방사체와 발룬의 간단한 연결로 안테나가 설계되도록 하여 다양한 구조로 쉽게 구현 가능하도록 하였다. 제작된 안테나는 6.8~10 GHz의 주파수 범위에서 3~6dBi의 이득을 가졌다.

• 암석학회지
• /
• 제16권3호
• /
• pp.162-179
• /
• 2007

영남(소백산)육괴의 남서부인 지리산지역의 북서부에 선캠브리아 편마암 복합체를 트라이아스기(약 223 Ma)에 관입한 마천층상관입암은 크게 층상계열과 엽상계열의 두 그룹으로 구분되는 고철질-초고철질 암석들로 구성되어 있으며, 마그마혼합의 특성을 잘 보이는 암맥상의 고철질 암이 수반된다. 층상계열은 누적조직의 특성과 주구성 유색광물의 종류에 의해 중앙부의 감람석 반려암대(하부대)와 주변부의 각섬석 반려암대(중 내지 상부대피 두 부분으로 다시 세분된다. 중앙부의 감람석 반려암은 비교적 얇은 우흑질과 우백질의 층들이 규칙적으로 교호된 중립질 반려암질 암과 균질하고 두꺼운 층상구조를 이룬 조립질 반려암질 암들이 서로 협재되어 있으며, 주구성 암종은 우흑질 반려암, 트록토라이트, 우백질 트록토라이트, 사장암질암 등으로 감람석과 사장석이 주구성 광물이다. 엽상계열은 함석영 흑운모휘석 반려암과 보다 분화된 특성의 각섬석 섬록암으로 분류되며 간극상로 산출되는 소량의 석영과 미사장석을 포함하고 있다 주변의 선캠브리아 편마암류와의 접촉대에 냉각대가 발달되어 있어 심부에서 보다 분화된 동원성 마그마가 어느 정도 시간적인 간격을 갖고 좀 더 냉각된 환경에서 관입한 것으로 보인다. 층상계열에 발달된 층상구조는 감람석은 주로 정누적구조 내지 부가누적구조, 사장석은 부가누적 내지 간극누적구조를 보이며, 단사휘석과 각섬석은 간극누적 내지 이형부가누적조직을 이루고 있다. 층상암들에서 마그마작용동안 생성된 습곡구조, 점이층리, 사층리 등이 드물지 않게 산출된다. 마천층상관입암체에 발달된 층상구조와 엽상구조가 주로 중력침전과 제자리 결정작용에 의해 생성되었으며 슬럼핑과 밀도류 흐름작용도 상당한 역할을 하였을 것으로 해석된다.

• 한국전자파학회논문지
• /
• 제12권1호
• /
• pp.92-98
• /
• 2001

Closed-form 그린함수를 사용하여 다층 평판 구조체의 산란 문제를 해석할 경우, 주된 어려운 문제점 중의 하나의 대각행렬 요소의 계산결과가 느리게 수렴하고 안정되지 않다는 점이다. 즉, 대각행렬 요소 계산시 전원 자신의 항에 해당되는 $e^{-jkr}/{\gamma}$ 형태의 특이 적분처리를 했음에도 불구하고 계산결과의 느린 수렴도 문제가 몇 개의 복소 영상항에 해당하는 적분과정에 여전히 남아있음을 알 수 있었다. 이와 같은 문제점을 해소하기 위해, 일반화된 지수함수와 2중적분을 극좌표계에서 가우스 구적법을 사용하여 계산할 수 있는 새로운 적분 기법을 제시하고자 한다. 새로운 적분기법을 알로리즘의 안정성과 수렴도에 관하여 본 논문에서 논의되면, 그 타당성을 확인하기 위해 마이크로스트립 패치 안테나의 산란 문제에 이 적분법을 적용해 보았다.