• Journal of the Korean earth science society
• /
• v.26 no.1
• /
• pp.93-105
• /
• 2005

Climatological characteristics in the variation of soil temperatures in Korea were investigated using Korea Meterological Administration's observation data. And the impacts of soil moisture on the variation of soil temperature were examined using observed precipitation data. The climatological averages of soil temperatures are ranged from 14.4 to $15.0^{\circ}C$ regardless of depths. And they showed an latitudinal gradient with a warm temperature at the southern region and 'U' shape as in the air temperature with a high value along the coastal region. The relatively higher heat capacity and low conductivity of soil compared to those of the air resulted in the significant delay of the maximum and minimum date with depth. As a results, soil acts as a heat source during winter while a heat sink during summer. Global warming and urban heat island have increased the soil temperatures with an average rate $0.3\~0.5^{\circ}C/10-year$ as in the air temperature during last 30 years $(1973\~2002)$. However, the warming rate is maximized during spring contrary to the winter in the air temperature. The temporal variation of soil temperatures is strongly affected by that of soil moisture through an modification of the heat capacity and heat convection. In general, the increased soil moisture clearly decreased the temporal variations and increased the deep layer soil temperatures during cold season.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.437-445
• /
• 2008

The presence of a "prismless" layer on the enamel surface particularly on deciduous teeth has been reported by a number of workers. This structure, which appears to lack the normal prism delineations, could interfere with tag formation and hence, reduce bonding to such surfaces. The purpose of this study was to investigate the relationship of etching times on the effect of acid etching on primary enamel with respect to the quality of etching patterns. Labial surfaces of 32 extracted or exfoliated caries-free primary anterior teeth were used. 35% phosphoric acid gel was used only cervical regions of labial surfaces for each etching time group, 15, 30, 45 and 60 seconds. The surfaces were then washed with water for 20 seconds and dried with air spray for 20 seconds. 1. The Type 3 is 75% when the 15 seconds acid etching time was used. 2. The Type 1 is 38% and Type 2 is 75% when the 30 and 45 seconds acid etching time was used. 3. The Type 1 is 25% and Type 2 is 75% when the 60 seconds acid etching time was used. 4. An etching time of 60 seconds produced a constant and regular etching pattern. 5. There is a significant difference between the groups with respect to the patterns of etch achieved(p<0.05). 6. We confirmed that the acid induced patterns(type 1, 2) became more pronounced when the application time increased(p<0.05). $45{\sim}60$ seconds was the optimal time for etching on the primary enamel.

• Journal of Gastric Cancer
• /
• v.5 no.4 s.20
• /
• pp.288-294
• /
• 2005

Purpose: Superficially spreading (SS) early gastric cancer (EGC) is characterized by wide horizontal extension without deep vertical invasion. It is a relatively rare form of EGC, and it's clinicopathological (C-P) characteristics are not evident. This study aimed to clarify their C-P characteristics. Materials and Methods: We defined SS EGC as invading less than the submucosal layer that measured more than 60 mm in diameter or wider than $5{\times}5cm \;(25cm^2)$ in width. The C-P characteristics and prognosis were compared between 69 patients with SS EGC and 319 patients with the common type EGC (EGC except SS type). Results: For SS EGC lymph node metastases, Lauren's diffuse type, lymphatic invasion were significantly higher than in common type EGC. In patients with SS EGC, all of the metastatic lymph nodes were anatomically distributed within the paragastric region, with fewer along the left gastric artery and common hepatic artery. In 6 cases of SS EGC with resection marqins less than 10 mm, there was no death during the follow-up period (4 to 13 years after operation) if margins were not involved. Age (>58 yrs), tumor site (upper 1/3), lymph node metastasis, submucosal invasion were statistically significant poor prognostic factor in univariate survival analysis. In multivariate survival analysis, age and lymph node metastasis were independent prognostic factors. However, tumor diameter or width was not a significant prognostic factor. Conclusion: Although SS EGC has histologically distinct properties, gastrectomy with free surgical margins and appropriate lymph node dissection $(D1+{\beta})$ could be a suitable treatment.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.190-196
• /
• 2010

Nowadays many people use antibiotics to protect processed foods from many pathogenic bacteria. The abuse of antibiotics, however, can run the risk of creating resistant forms of bacterium. Our study focus is on making new substances that can not only replace antibiotics but also be friendly to the environment. In our experiments, we used fermented citrus fruit, soil microbes and coenzyme Q10 as probiotics and prebiotics. Chickens in the experimental group were fed these substances via oral route while those in the control group were not. After specific time periods, blood and feces samples were collected to test for Salmonella spp.. It is interesting that fermented citrus fruit was the most effective in suppressing this bacterium. Furthermore, dissection of the experiment group chickens shows that their livers did not change to a yellow color, in contrast to the control group. The results confirmed our proposal that the chickens fed with these materials can be protected from infection by Salmonella and other pathogens. These probiotics and prebiotics are highly practical because they are natural substances that can be easily recycled in the environment. It can also be used as an animal feed ingredient because of its safety.

• Korean Journal of Poultry Science
• /
• v.34 no.3
• /
• pp.157-163
• /
• 2007

To examine the effects of dietary organic selenium and vitamin E supplementation on egg production, egg weight, daily egg mass, feed intake, feed conversion, egg quality, lipid-soluble antioxidative capacity (ACL) in egg yolk, and selenium retention of egg in laying hens, Hy-Line laying hens of 77 wk old were replaced in the individual cage for 12 week. A corn-soybean meal based diet was supplemented with 0 (control), vitamin E 100 IU/kg and the combination of 0.9 ppm Se from selenium yeast (SY) and vitamin E 50, 100 and 150 IU/kg. Egg production and daily egg mass were significantly increased (P<0.05) in supplemental vitamin E 100 IU, and 0.9 ppm SY + vitamin E 50 IU than control for the whole experimental period. However, feed intake and feed conversion were not affected by supplemental vitamin E and SY. Haugh unit was significantly (P<0.05) higher in supplemental vitamin E 100 IU and 0.9 ppm SY + vitamin E 50 IU than control, 0.9 ppm SY + vitamin E 100 and 0.9 ppm SY + 150 IU in week 5. Haugh unit of the eggs during storage decreased significantly(P<0.05) from day 1 to day 11. However, Haugh units of the eggs from 0.9 ppm SY + vitamin E 150 IU treated groups did not decreased significantly until day 5. Yolk color was significantly (P<0.05) higher in 0.9 ppm SY + vitamin E 50 and 0.9 ppm SY + 100 IU than other treatment groups in week 1. Selenium concentrations of egg were significantly increased (P<0.05) in 0.9 ppm SY + vitamin E than control and vitamin E 100 IU groups. Lipid-soluble antioxidative capacity (ACL) in egg yolk was significantly (P<0.05) higher in supplemental combination of 0.9 ppm SY + vitamin E 150 IU when compared to those of other treatment groups.

• Korean Journal of Food Science and Technology
• /
• v.24 no.6
• /
• pp.610-615
• /
• 1992

The difference in content and composition of total lipid, lipid fractions and fatty acids of perilla leaves being used fresh vegetable was investigated in relation to the color of undersurface, i.e. green perilla leaves(GPL) and violet perilla leaves(VPL), by column- and thin layer- and gas chromatography. Total lipid(TL) content was of little difference between green leaves(GPL) (5.24%dw) and violet one (VPL) (5.02%dw), while neutral lipid(NL) content was higher In VPL(36.4% of TL) than GPL(34.7%). The major components were sterol ester and hydrocarbons(58.5%) and trigylcerides(14.9%) in NL, $mono-(42{\sim}45%)$ and $di-(13{\sim}15%)$ galactosyl digylceride in glycolipids(GL) and phosphatidyl ethanolamine$(40{\sim}45%)$ and phosphatidyl glycerol(13%) in phospholipids(PL) for both GPL and VPL. The number of component was 10 in all three fractions. The similarity of component between GPL and VPL was in decreasing order of NL(r=1.00), GL(r=0.997) and PL(r= 0.968). Major fatty acids were linolenic $(62{\sim}64%)$, palmitic$(10{\sim}12%)$ and linolic$(9{\sim}10%)$ for TL, linolenic, palmitic, myristic(43, 15, 14%) for NL, linolenic, oleic, palmitic(79, 11, 8%) for GL and linolenic, linoleic, palmitic(36, 25, 23%) for PL. Unsaturated fatty acid percentage was higher only in GL of VPL than GPL. The similarity of fatty acid composition between GPL and VPL was least in PL and so it was among other fraction with PL.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.19-27
• /
• 2003

Surface finishes of PCB laminates are important in the solder joint reliability of flip chip package because the types and thicknesses of intermetallic compound(IMC), and compositions and hardness of solders are affected by them. In this study, effects of surface finishes of PCB on the low cycle fatigue resistance of Sn-based lead-free solders; Sn-3.5Ag, Sn-3.5Ag-XCu(X=0.75, 1.5), Sn-3.5Ag-XBi(X=2.5, 7.5) and Sn-0.7Cu were investigated for the Cu and Au/Ni surface finish treatments. Displacement controlled room temperature lap shear fatigue tests showed that fatigue resistance of Sn-3.5Ag-XCu(X=0.75, 1.5), Sn-3.5Ag and Sn-0.7Cu alloys were more or less the same each other but much better than that of Bi containing alloys regardless of the surface finish layer used. In general, solder joints on the Au/Ni finish showed better fatigue resistance than those on the Cu finish. Cross-sectional fractography revealed microcracks nucleation inside of the interfacial IMC near the solder mask edge, more frequently on the Cu than the Au/Ni surface finish. Macro cracks followed the solder/IMC interface in the Bi containing alloys, while they propagated in the solder matrix in other alloys. It was ascribed to the Bi segregation at the solder/IMC interface and the solid solution hardening effect of Bi in the $\beta-Sn$ matrix.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.517-528
• /
• 2007

Domestic or international existing researches regarding rail damage factors are focused on laying, vehicle conditions, driving speed and driving habits and overlook characteristics of track structure (elasticity, maintenance etc). Also in ballast track, as there is no special lateral spring stiffness of track also called as ballast lateral resistance in concrete track, generally, existing study shows concrete track has 2 time shorter life cycle for rail replacement than ballast track due to abrasion. As a result of domestic concrete track design and operation performance review, concrete track elasticity is lower than track elasticity of ballast track resulting higher damage on rail and tracks. Generally, concrete track has advantage in track elasticity adjustment than ballast track and in case of Europe, in concrete track design, it is recommended to have same or higher performance range of vertical elastic stiffness of ballast track but domestically or internationally review on lateral spring stiffness of track is very minimal. Therefore, through analysis of service line track on site measurement and analysis on performance of maintenance, in this research, dynamic characteristic behaviors of commonly used ballast and concrete track are studied to infer elasticity of service line track and experimentally prove effects of track lateral spring stiffness that influence curved rail damage as well as correlation between track elasticity by track system and rail damage to propose importance of appropriate elastic stiffness level for concrete and ballast track.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.551-557
• /
• 2007

This paper describes a study on the permeability reduction of the riverbed ground during urban railway tunnel construction. The research is mainly concentrated on the study of the grouting or injection methods among permeability reduction methods which can be adapted in the riverbed ground. Firstly, the various grouting methods are theoretically reviewed and compared based on the previous research papers and case study results. It is also evaluated the grouting methods in view of a safe construction of the river crossing railway tunnel. Baced on the literature review and previous construction data, the design technology of grouting methods considering the long term hydro-geological behaviour in the riverbed, is suggested. Two injection methods namely, Natural Durable Stabilizer(N.D.S) and Space-Multi Injaction Grouting(S.M.I) methods, are introduced as new approach methods which can be adopted to modify the riverbed ground. In order to evaluate the ground that grouted and modified by the N.D.S and S.M.I method, the pilot test programmes including the field and laboratory permeability tests, are carried out in the river crossing tunnel construction sites. The results obtained from pilot test programme, are also reviewed. In conclusion, the grouting efficiency of the S.M.I method using the non-alcalimeter silica sol is better than that of NDS method using cement. In addition, it hopes that the research results are contributed to develop the grouting design technology.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.52-59
• /
• 2008

We have developed a new deep-towed marine DC resistivity survey system. It was designed to detect the top boundary of the methane hydrate zone, which is not imaged well by seismic reflection surveys. Our system, with a transmitter and a 160-m-long tail with eight source electrodes and a receiver dipole, is towed from a research vessel near the seafloor. Numerical calculations show that our marine DC resistivity survey system can effectively image the top surface of the methane hydrate layer. A survey was carried out off Joetsu, in the Japan Sea, where outcrops of methane hydrate are observed. We successfully obtained DC resistivity data along a profile ${\sim}3.5\;km$ long, and detected relatively high apparent resistivity values. Particularly in areas with methane hydrate exposure, anomalously high apparent resistivity was observed, and we interpret these high apparent resistivities to be due to the methane hydrate zone below the seafloor. Marine DC resistivity surveys will be a new tool to image sub-seafloor structures within methane hydrate zones.