• 한국정보통신학회논문지
• /
• 제23권7호
• /
• pp.845-851
• /
• 2019

본 논문에서는 애드혹 라우팅 네트워크를 다양한 사용자 모바일 기기에서 사용하기 위한 설계 방법을 소개하고, 이를 모바일 기기에 직접 구현하여 실제 환경에서 어떻게 작동하는지 성능을 관찰하고 검증하였다. 상용 사용자 모바일 기기에서의 애드혹 라우팅 네트워크의 사용성을 고려해 커널을 수정하지 않고 사용자 계층에서 구현하는 디자인을 선택하였다. 또한 이동성이 높은 환경에서 적절히 사용하기 위해 기존 애드혹 라우팅 네트워크들을 분석하였으며 그 결과 사용자 계층에서 AODV (ad-hoc on-demand distance vector) 프로토콜과 TCP를 구현하였다. 모바일 기기들이 일렬로 놓여 있는 환경과 중앙 노드가 주변 노드 여러 대와 통신하는 환경에서 실험을 진행하였고, 그 결과 일렬로 놓인 환경에서 최대 12 홉, 중앙 노드와 주변 노드가 통신하는 환경에서 최대 5 개의 노드와 통신하는 것을 확인하였다.

• 자원리싸이클링
• /
• 제28권1호
• /
• pp.3-14
• /
• 2019

구리는 뛰어난 전기전도성 및 열전달 특성으로 인해 많은 전자기기 및 건축 부품에 활용되고 있고 니켈 등 다른 도금의 밑 도금으로 사용되는 등 현대 산업에서 필수적으로 사용되는 소재이다. 뿐만 아니라 차세대 산업군에서 배선, 센서, 데이터 장비의 사용량과 중요도가 더욱 커지면서 그 활용도가 더욱 커질 것으로 예상됨에도 불구하고 유럽발 경제위기, 중국 경제 저성장 기조, 트럼프 대통령의 공공 산업설비 투자 공약 등에 따라 가격이 급동하는 추세를 보여 안정적인 수급 확보 및 자원관리에 어려움을 겪는 실정이다. 국내 구리 사용량의 거의 대부분을 전기동을 이용하여 사용하기 때문에 본 연구에서는 상용화 되고 있는 구리 재활용 기술과 연구 단계에 머물고 있는 구리 재활용 기술을 구분하여 각각의 기술적 수준을 파악하였다. 이를 통해 각 공정별 특징과 향후 기술개발이 요구되는 분야를 고찰해 보고자 하였다.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.51-57
• /
• 2021

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.

• Geomechanics and Engineering
• /
• 제23권6호
• /
• pp.513-521
• /
• 2020

In this paper, due to the need for cutting cement-soil group pile composite foundation under the 7-story masonry structure of Zhenghe District and the shield tunnel of Zhengzhou Metro Line 5, a field test was conducted to directly cut cement-soil single pile composite foundation with diameter Ф=500 mm. Research results showed that the load transfer mechanism of composite foundation was not changed before and after shield tunnel cut the pile, and pile body and the soil between piles was still responsible for overburden load. The construction disturbance of shield cutting pile is a complicated mechanical process. The load carried by the original pile body was affected by the disturbance effect of pile cutting construction. Also, the fraction of the load carried by the original pile body was transferred to the soil between the piles and therefore, the bearing capacity of composite foundation was not decreased. Only the fractions of the load carried by pile and the soil between piles were distributed. On-site monitoring results showed that the settlement of pressure-bearing plates produced during shield cutting stage accounted for about 7% of total settlement. After the completion of pile cutting, the settlements of bearing plates generated by shield machine during residual pile composite foundation stage and shield machine tail were far away from residual pile composite foundation stage which accounted for about 15% and 74% of total settlement, respectively. In order to reduce the impact of shield cutting pile construction on the settlement of upper composite foundation, it was recommended to take measures such as optimization of shield construction parameters, radial grouting reinforcement and "clay shock" grouting within the disturbance range of shield cutting pile construction. Before pile cutting, the pile-soil stress ratio n of composite foundation was 2.437. After the shield cut pile is completed, the soil around the lining structure is gradually consolidated and reshaped, and residual pile composite foundation reaches a new state of force balance. This was because the condensation of grouting layer could increase the resistance of remaining pile end and friction resistance of the side of the pile.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권2호
• /
• pp.6-9
• /
• 2021

단결정의 덩어리 시료로부터 박리된 NbSe₂와 FeSe 박막을 이용한 동종 초전도 vdW 접합을 만들고 저온전도측정을 통해 JJ 효과를 확인하였다. 각 물질의 초전도 틈을 측정하였으며 기존 결과와 잘 일치하는 것을 확인하였다. FeSe 접합의 경우 NbSe₂ 접합과 다르게 JJ가 구현되지 않는 경우가 다수 발생하는데 이는 NbSe₂와 구분되는 FeSe의 특성때문으로 보이며 일관성있는 JJ 구현을 위해서 저온 접합이나 접합 각도 의존성을 통한 향후 연구가 필요하다. 그럼에도 불구하고, 본 연구 결과는 FeSe 2차원 결정을 이용해 JJ가 잘 구현될 수 있음을 실험적으로 보인 첫 사례로서 그 의의를 갖는다.

• 한국컴퓨터정보학회논문지
• /
• 제26권7호
• /
• pp.37-44
• /
• 2021

뇌 MRI 영상의 자동 분류는 뇌종양의 조기 진단을 하는 데 있어 중요한 역할을 한다. 본 연구에서 우리는 심층 특징 앙상블을 사용한 MRI 영상에서의 딥 러닝 기반 뇌종양 분류 모델을 제안한다. 우선 사전 학습된 3개의 합성 곱 신경망을 사용하여 입력 MRI 영상에 대한 심층 특징들을 추출한다. 그 이후 추출된 심층 특징들은 완전 연결 계층들로 구성된 분류 모듈의 입력 값으로 들어간다. 분류 모듈에서는 우선 3개의 서로 다른 심층 특징들 각각에 대해 먼저 완전 연결 계층을 거쳐 특징 차원을 줄인다. 그 이후 3개의 차원이 준 특징들을 결합하여 하나의 특징 벡터를 생성한 뒤 다시 완전 연결 계층의 입력값으로 들어가서 최종적인 분류 결과를 예측한다. 우리가 제안한 모델을 평가하기 위해 웹상에 공개된 뇌 MRI 데이터 셋을 사용하였다. 실험 결과 우리가 제안한 모델이 다른 기계학습 기반 모델보다 더 좋은 성능을 나타냄을 확인하였다.

• 융합신호처리학회논문지
• /
• 제21권4호
• /
• pp.177-182
• /
• 2020

친환경적이고 에너지 절약적인 난방 방법으로 히트펌프에 대한 관심이 높아지고 있다. 특히, 저온 지역에서 난방이 가능한 히트펌프를 개발하기 위해 실외기 표면에 서리가 발생하지 않도록 하는 연구가 많아지고 있다. 즉, 온도가 낮은 지역에서 히트펌프를 통해 난방을 할 경우 실외기 표면에 서리층이 형성되어 전열성능을 떨어뜨려 난방능력을 감소시키는 것이 일반적이다. 따라서 본 연구에서는 히트펌프의 실외기에 유입되는 습공기의 수증기를 흡착식 제습시스템을 부착하여 제거하고자 한다. 본 연구를 통해 저온지역에서 가장 효과적인 제습방법을 제시할 수 있을 것으로 판단된다. 그리고 히트펌프의 실외기 전면에 흡착식 제습시스템을 부착하여 에너지 효율이 높은 히트펌프를 개발할 수 있을 것으로 사료된다.

• Geomechanics and Engineering
• /
• 제24권5호
• /
• pp.431-441
• /
• 2021

Rock-socketed drilled shafts are widely used to transfer the heavy loads from the superstructure especially in mountainous area. Extensive research has been done on the behavior of rock-socketed drilled shafts under compressive load. However, little attention has been paid to uplift behavior of drilled shaft in rock, which govern the overall behavior of the foundation system. In this paper, a series of centrifuge tests have been performed to investigate the uplift response of rock-socketed drilled shafts. The pull-out tests of drilled shafts installed in layered rocks having various strengths were conducted. The load-displacement response, axial load distributions in the shaft and the unit skin friction distribution under pull-out loads were investigated. The effects of the strength of rock socket on the initial stiffness, ultimate capacity and mobilization of friction of the foundation, were also examined. The results indicated that characteristics of rock-socket has a significant influence on the uplift behavior of drilled shaft. Most of the applied uplift load were carried by socketed rock when the drilled shaft was installed in the sand over rock layer, whereas substantial load was carried by both upper and lower rock layers when the drilled shaft was completely socketed into layered rock. The pattern of mobilized shaft friction and point where the maximum unit shaft friction occurred were also found to be affected by the socket condition surrounding the drilled shaft.

• 대한족부족관절학회지
• /
• 제25권4호
• /
• pp.165-170
• /
• 2021

Purpose: This study sought to evaluate the clinical effectiveness of the shortening effect of the modified Weil osteotomy for the treatment of Freiberg's disease. Materials and Methods: We reviewed 21 cases treated with the modified Weil osteotomy for Freiberg's disease from November 2005 to June 2019. The average follow-up period was 32.5 months and the mean age of the patients was 38.3 years. The clinical results were analyzed using the American Orthopaedic Foot and Ankle Society (AOFAS) lesser metatarsophalangeal-interphalangeal scale, the visual analogue scale (VAS), and the range of motion (ROM) of the metatarsophalangeal joint. In the radiologic evaluation, the length of preoperative and postoperative metatarsal shortening was compared. Results: The average AOFAS lesser metatarsophalangeal-interphalangeal scale showed an improvement from 60.5 preoperatively to 90.9 at the latest follow-up. VAS showed a decrease from 5.4 preoperatively to 0.9 at the latest follow-up. ROM of the affected metatarsophalangeal joint increased from 40.2 degrees preoperatively to 58.6 degrees at the latest follow-up. The mean length of metatarsal shortening was 6.7 mm. There was no transfer metatarsalgia, osteonecrosis, and definite joint space narrowing. Conclusion: Modified Weil osteotomy with second layer cutting is an effective treatment option to restore the joint surface and painless joint motion for patients with Freiberg's disease.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2311-2320
• /
• 2022

The main outcomes of the experiments H2P6 performed in the thermal-hydraulics large-scale PANDA facility at PSI in the frame of the OECD/NEA HYMERES-2 project are presented in this article. The experiments of the H2P6 series consists of two PANDA tests characterized by the activation of three (H2P6_1) or one (H2P6_2) cooler(s) in an initially stratified and pressurized containment atmosphere. The initial stratification is defined by a helium-rich region located in the upper part of the vessel and a steam/air atmosphere in the lower part. The activation of the cooler(s) results i) in the condensation of the steam in the vicinity of the cooler(s), ii) the corresponding activation of large scale natural circulation currents in the vessel atmosphere, with the result of iii) the re-distribution and mixing of the Helium stratification initially located in the upper half of the vessel and iv) the continuous pressure decay. The initial helium layer represents hydrogen generated in a postulated severe accident. The main question to be answered by the experiments is whether or not the interaction of the different, localized cooler units would be important for the application of numerical methods. The paper describes the initial and boundary conditions and the experimental results of the H2P6 series with the suggestion of simple scaling laws for both experiments in terms of i) the temperature difference(s) across the cooler(s), ii) the transient steam and helium content and iii) the pressure decay in the vessel. The outcomes of this scaling indicate that the interaction between separate, closely localized units does not play a prominent role for the present experiments. It is therefore reasonable to model several units as one large component with equivalent heat transfer area and total water flow rate.