• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.239-244
• /
• 2017

전력 수요는 매년 증가추세에 있으며, 이에 따라 발전소에서 동작하는 모든 장비들과 대용량의 장거리 전력수송을 위한 장비들은 신뢰할 수 있는 수준에서 완전한 상태로 동작하여야 한다. 발전소에서 생산한 고전압 전력을 전달하기 위해 사용하는 케이블은 주로 6.6 kV XLPE 케이블(또는 CV케이블)이다. 제작 기술, 설치환경 및 사용조건에 다르겠지만, 케이블은 동작함과 동시에 열화과정이 진행된다. 접속재의 경우, 제조 결함이나 공사 결함이 있는 경우 대체로 동작 후 약 3 년 내에 고장을 일으키며, 그렇지 않는 경우 수명이 20-30 년을 지속하는 경우가 많다. 우리는 케이블의 열화 상태를 감시하기 위한 장비를 개발하여 충남 태안의 한국서부발전주식회사(Korea Western Power Co. Ltd.)에 설치하였다. 우리는 이 논문에서 케이블의 열화 판정의 기준을 설정하고, 기준에 따른 열화정도를 판정하고, 케이블의 대체여부를 결정함으로써 발전소에서 설치된 활선 케이블의 동작 상태를 감시한 결과와 케이블을 구성하고 있는 절연체와 방식층이 절연저항 특성에 미치는 영향 및 케이블의 동작에 미치는 영향을 연구한 결과를 제시한다.

• 한국CDE학회논문집
• /
• 제15권6호
• /
• pp.425-439
• /
• 2010

The current challenge with which most shipyards are forced is to reduce the design time and the time-to-delivery because of explosive order of shipbuilding. Collaborative design and product data management have become important to reduce the lead time. Furthermore, enterprise information technologies such as ERP (Enterprise Resource Planning), SCM (Supply Chain management), and APS (Advanced Planning System) requires the collaborative environment. Also, manufacturing environment has been considered as a topic of strategic interest to get shorter product lifecycles in shipyards. Most shipyards have chosen an environment of ETO (Engineering To Order) strategy which designs and produces new products in response to various requirements of customer, rules and regulations. In the ATO (Assemble 10 Order) environment, most component parts have been designed to be procured or produced on the order requirement. The basic distinction between the ETO and ATO is the timing of the design. Thus in the ATO environment, it is more flexible in reducing the lead time to meet the specified requirements of customers. However, the ETO strategy requires new ship design process and ship product structures that are linked with the implementation of PLM. And, the function and architecture of current PLM solution has been designed based upon ATO environment properly. This paper presents the PLM architecture which effectively reflects the characteristics of shipbuilding. 4-layer architecture model is suggested to implement the PLM system. Also, implemented functions of ship PLM is explained in order to make a practical guidance for ship PLM implementation.

• 구강회복응용과학지
• /
• 제32권3호
• /
• pp.246-254
• /
• 2016

Direct metal laser sintering (DMLS) 방식은 3D 프린팅 중 한 방식으로, 재료를 쌓아가면서 레이저를 이용하여 선택적으로 sintering하는 방식이다. 이는 주조 방식에서 문제되는 결손과 뒤틀림을 방지할 수 있으며 절삭 가공 방식으로 제작하기 어려운 복잡한 구조물을 제작할 수 있다. 본 증례들은 DMLS 방식을 이용하여 지대치 간 길이가 긴 고정성 보철물, 포스트 등 다양한 고정성 보철물을 제작하여 수복하였고, 주기적인 관찰 결과 심미적, 기능적으로 만족할만한 결과를 얻었기에 이를 보고하는 바이다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.124-129
• /
• 2015

Organic electronics are the domain in which the components and circuits are made of organic materials. This new electronics help to realize electronic and optoelectronic devices on flexible substrates. In recent years, organic materials have replaced conventional semiconductors in many electronic components such as, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic (OPVs). It is well known that organic light emitting diodes (OLEDs) have many advantages in comparison with inorganic light-emitting diodes LEDs. These advantages include the low price of manufacturing, large area of electroluminescent display, uniform emission and lower the requirement for power. The aim of this paper is to model polymer LEDs and OLEDs made with small molecules for studying the electrical and optical characteristics. The purpose of this modeling process is, to obtain information about the running of OLEDs, as well as, the injection and charge transport mechanisms. The first simulation structure used in this paper is a mono layer device; typically consisting of the poly (2-methoxy-5(2'-ethyl) hexoxy-phenylenevinylene) (MEH-PPV) polymer sandwiched between an anode with a high work function, usually an indium tin oxide (ITO) substrate, and a cathode with a relatively low work function, such as Al. Electrons will then be injected from the cathode and recombine with electron holes injected from the anode, emitting light. In the second structure, we replaced MEH-PPV by tris (8-hydroxyquinolinato) aluminum (Alq₃). This simulation uses, the Poole-Frenkel -like mobility model and the Langevin bimolecular recombination model as the transport and recombination mechanism. These models are enabled in ATLAS- SILVACO. To optimize OLED performance, we propose to change some parameters in this device, such as doping concentration, thickness and electrode materials.

• 대한임상전기생리학회지
• /
• 제11권1호
• /
• pp.13-19
• /
• 2013

Purpose : The purpose of this research was to develop a proposal by investigating the work habits associated with exercise programs for the prevention of chronic back pain. Methods : The symptoms, areas and causes of musculoskeletal patients were analyzed during a three-month period in order to develop and apply prevention programs that stimulate lumbar deep layer muscle movement. Results : The results of this study show that the lumbar and shoulders are primary areas of pain. According to the literature, lumbar and shoulder pain is caused due to long periods in the standing position and unhealthy posture during work. A preliminary program was conducted for one month to study lower back pain prevention. Preliminary results of the program showed a lumbar stabilizing effect caused by the strengthening of abdominal muscles. In addition, the alignment of the spine often leads to effective action. Therefore, action-oriented programs should be implemented in order to induce contractions of the transverse abdominis muscle. Conclusion : The completed program should consider habit and practices of workers within their working environment. The promotion of health through exercise for both employers and workers is expected to bring physical and psychological benefits that will positively affect economic results.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.38-43
• /
• 2007

This paper describes ultrasonically assisted grinding used to obtain a glossy surface quickly and precisely. High-quality surfaces are required for plastic injection molding dies used in the production of plastic parts such as dials for cellular phones. Traditionally, in order to finish the dies, manual polishing by a skilled worker has been required after the machining processes, such as electro discharge machining (EDM), which leaves an affected layer, and milling, which leaves tooling marks. However, manual polishing causes detrimental geometrical deviations of the die and consumes several days to finish a die surface. Therefore, a machining process for finishing dies without manual polishing to improve the surface roughness and form accuracy would be extremely valuable. In this study, a 3D positioning machine equipped with an ultrasonic spindle was used to conduct grinding experiments. An electroplated diamond tool was used for these experiments. Generally, diamond tools cannot grind steel because of excessive wear as a result of carbon atoms diffusing into bulk steel and chips. However, ultrasonically assisted grinding can achieve a fine surface (roughness Rz of $0.4{\mu}m$) on die steel without severe tool wear. The final aim of this study is to realize mirror surface grinding for injection molding dies without manual polishing. To do this, it is necessary to fabricate an electroplated diamond tool with high form accuracy and low run-out. This paper describes a tool-making method for high precision grinding and the grinding performance of a self-electroplated tool. The ground surface textures, tool performance and tool life were investigated A ground surface roughness Rz of 0.14 um was achieved Our results show that the spindle speed, feed rate and cross feed affected the surface texture. One tool could finish $5000mm^2$ of die steel surface without any deterioration of the ground surface roughness.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.301-305
• /
• 2008

유기 발광 다이오드(Organic light-emitting diode, OLED)는 저전력 구동, 자체발광, 넓은 시야각, 우수한 고해상도, 풀 칼라, 높은 재현성, 빠른 응답속도, 간편한 제조 공정 등의 장점을 가지고 있으나, 고성능 디스플레이로서 실용화하기 위해서는 아직도 해결되어야 할 과제가 많다. 소자의 저소비전력, 제조공정의 안정성, 대형 기판기술, 봉지 기술, 소자의 수명, 풀 컬러화를 위한 적색, 청색, 발광소자의 고휘도 등이 시급하다. 무엇보다 중요한 것은 유기 발광 소자의 효율을 향상시키는 것이 상용화를 위한 키(key) 이다. 이를 위해서 유기 발광 소자의 구조 개선과 새로운 유기 물질 적용을 통해 구동전압을 낮춤으로써 효율을 향상시킬 수 있다. 따라서 본 연구에서는 유기 발광 소자의 효율을 향상시킬 목적으로 ITO/TPD/Znq2+DCJTB/Znq2/Al의 구조와 ITO/CuPc/N PB/Alq3+DCJTB/Alq3/Al의 구조를 가지는 소자의 발광층에 형광염료를 도포한 적색 발광 소자를 제작하고, 그 전기적 및 광학적인 특성을 평가하였다.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.666-671
• /
• 2014

최근 디젤 차량과 같은 내연기관의 고효율화에 따라, 보조난방 열원으로서 PTC 히터의 사용이 증가하는 추세이다. 디젤 차량의 시동 초기에는 냉각수의 온도가 난방으로 직접 사용하기에 충분히 높지 않으므로, 동절기 난방을 위해 보조난방 열원은 필수적이다. 본 연구에서는 스크린 인쇄 전극공정을 바탕으로 한 PTC 소자를 제작하였고, 이를 활용한 PTC 소자 모듈 및 히터를 설계 및 제작하였다. PTC 소자 모듈의 방열핀 접촉형상 및 전열소자의 크기 변경에 따른 난방성능 변화를 열유동 해석을 통해 분석하였고, 난방성능 실험을 수행하여 PTC 히터의 난방성능 및 효율 특성을 살펴보았다. PTC 히터 시작품의 경우, 기존 PTC 히터와 동등한 수준 이상의 난방성능 및 효율을 나타내었으며, 향후 이를 바탕으로 PTC 소자와 히터에 대한 공정개선 및 성능증대 연구를 수행할 계획이다.

• 한국가스학회지
• /
• 제2권4호
• /
• pp.67-72
• /
• 1998

Al-2wt.$\%$Zn 합금은 특히 해수에 대한 내식성이 우수하여 기화기 튜브의 회생양극재료로 사용되고 있다. 그러나 Al-2wt.$\%$Zn 용사코팅재는 모재금속과 코팅층사이의 결합강도부족, 해수의 낙하에너지에 의해 코팅층은 박리 된다. 이러한 용사코팅충의 문제점을 해결하고자 클래드재와 모재금속을 동시압출법을 통하여 클래드튜브 제조공정을 개발하였다. 클래드튜브의 내식성은 용사코팅튜브에 비하여 최소 2배 이상 향상되었다.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.501-506
• /
• 2019

To overcome the limitations of the conventional Ni anode-supported SOFCs, various types of ceramic anodes have been studied. However, these ceramic anodes are difficult to commercialize because of their low cell performances and difficulty in manufacturing anode-support typed SOFCs. Therefore, in this study, to use these ceramic anodes and take advantage of anode-supported SOFC, which can minimize ohmic loss from the thin electrolyte, we fabricated cathode support-typed SOFC. The cathode-support of LSCF-YSZ was prepared by the acid treatment of conventional Ni-YSZ (Yttria-stabilized Zirconia) anode-support, followed by the infiltration of LSCF to YSZ scaffold. The composite of $La(Sr)Ti(Ni)O_3$ and $Ce(Mn,Fe)O_2$ was used as the ceramic anode. The fabricated cathode-supported button cell showed a relatively low power density of $0.207Wcm^{-2}$ at $850^{\circ}C$; however, it is expected to show better performance through the optimization of the infiltration rate and thickness of LSCF-YSZ cathode-support layer.