• Wind and Structures
• /
• 제19권4호
• /
• pp.421-441
• /
• 2014

With the assistance of typhoon field data at aerial elevation level observed by meteorological satellites and wind velocity and direction records nearby the ground gathered in Guangzhou Weather Station between 1985 and 2001, some key wind field parameters under typhoon climate in Guangzhou region were calibrated based on Monte-Carlo stochastic algorithm and Meng's typhoon numerical model. By using Peak Over Threshold method (POT) and Generalized Pareto Distribution (GPD), Wind field characteristics during typhoons for various return periods in several typical engineering fields were predicted, showing that some distribution rules in relation to gradient height of atmosphere boundary layer, power-law component of wind profile, gust factor and extreme wind velocity at 1-3s time interval are obviously different from corresponding items in Chinese wind load Codes. In order to evaluate the influence of typhoon field parameters on long-span flexible bridges, 1:100 reduced-scale wind field of type B terrain was reillustrated under typhoon and normal conditions utilizing passive turbulence generators in TJ-3 wind tunnel, and wind-induced performance tests of aero-elastic model of long-span Guangzhou Xinguang arch bridge were carried out as well. Furthermore, aerodynamic admittance function about lattice cross section in mid-span arch lib under the condition of higher turbulence intensity of typhoon field was identified via using high-frequency force-measured balance. Based on identified aerodynamic admittance expressions, Wind-induced stochastic vibration of Xinguang arch bridge under typhoon and normal climates was calculated and compared, considering structural geometrical non-linearity, stochastic wind attack angle effects, etc. Thus, the aerodynamic response characteristics under typhoon and normal conditions can be illustrated and checked, which are of satisfactory response results for different oncoming wind velocities with resemblance to those wind tunnel testing data under the two types of climate modes.

• 공업화학
• /
• 제7권3호
• /
• pp.554-564
• /
• 1996

페롭스카이트 $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$(x=0.00, 0.01, 0.10, 0.20, 0.35, 및 0.50)를 산소전극물질로 사용하여 알칼리형 연료전지에서의 산소환원반응을 연구하였다. Fe치환에 따른 촉매특성의 변화를 X-선회절분석법(XRD), 열중량분석법(TG) 및 승온환원법(TPR)을 통하여 조사하였다. XRD 구조분석을 통하여 페롭스카이트 단위격자의 격자상수값을 측정할 수 있었다. TG 실험결과 Fe는 페롭스카이트 구조내에서 크게 안정화되어 $900^{\circ}C$까지 거의 환원되지 않았고, Fe치환량 증가에 따라 Co-O간의 결합에너지가 증가하여 고온에서 제거되는 산소종의 양이 증가하였다. TPR 실험결과, ${\alpha}$-(저온피크)와 ${\beta}$-(고온피크)산소종이 존재하였다. ${\beta}$-산소종은 Co와 강하게 결합되어 있는 산소종으로서 Fe치환량 증가에 따라 결합세기가 증가하였다. ${\alpha}$-산소종은 가역적으로 격자내외를 출입하는 산소환원반응의 활성종이었으며, Fe치환량 증가에 따른 격자상수의 증가는 금속과 ${\alpha}$-산소종간의 결합에너지로 볼 수 있는 ${\alpha}$산소종의 환원피크를 저온으로 이동시킴으로써 산소환원반응의 활성을 증가시켰다. 반면에, Fe치환량 증가에 따른 ${\alpha}$-산소종의 감소는 산소환원반응의 활성을 감소시켰으며, Fe치환에 따른 표면적의 증가는 반응활성에 크게 영향을 미치지 못하였다.

• 한국인터넷방송통신학회논문지
• /
• 제8권6호
• /
• pp.105-110
• /
• 2008

질소 분위기 하에서 GaN 에피층의 고온 급속 열처리 효과를 조사하였다. 열처리는 950도의 급속 열처리로를 이용하여 수행하였다. 급속 열처리에 따른 효과는 x선 회절을 통하여 연구하였다. 열처리 시간이 증가할수록 Bragg 피크는 각도가 큰 쪽으로 이동하였다. 피크의 FWHM은 열처리 시간이 증가함에 따라 약간의 증가 후 감소하였다가 다시 증가하였다. 시료는 적절한 조건 하에서 급속 열처리 후 구조적인 특성의 개선이 관측되었다. 시료의 결정성의 향상은 에피층의 격자 관련 요소들의 흐트러짐의 감소에 기인한다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권5호
• /
• pp.218-221
• /
• 2011

We modified the optical properties of the $CuInS_2$ nanocrystal (NC) by alloying. Nanocrystals (NCs) with alloyed cores were synthesized by refluxing the as-synthesized $CuInS_2$ NCs with a mixture of cadmium acetate, zinc acetate and palmitic acid. The shift in emission wavelength of the NCs after shell layer formation was minimized by alloying. The photoluminescence (PL) spectra showed significant reduction of emission intensity. A detailed study on the emission process of NCs implies that the formation of shell layers with small lattice mismatch minimized the mismatch strain generated from the shell layers in contrast to core alloyed NCs. In particular, time-resolved PL spectra of the NCs showed a significant increase in the lifetime of excited carriers by modifying the band alignment of the NCs by modifying the shell composition.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.915-920
• /
• 2007

AIN-based film bulk acoustic resonator (FBAR) devices which adopt a membrane-type configuration such as Mo/AIN/bottom-metal/Si are fabricated by employing a novel process. The proposed resonator structure does not require any supporting layer above the substrate, which leads to the reduction in energy loss of the resonators. For all the FBAR devices, the frequency response characteristics are measured and the device parameters, such as return loss and input impedance, are extracted from the frequency responses, and analyzed in terms of the various metals such as Al. Cu, Mo, W used in the bottom-electrode. The mass-loading effect caused by the used bottom-electrode metals is found to be the main reason for the difference revealed in the measured characteristics of the fabricated FBAH devices. The results obtained in this study also show that the degree of match in lattice constant and thermal expansion coefficient hetween piezoelectric layers and electrode metals is crucial to determine the device performance of FEAR.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.315-323
• /
• 1991

The preparation of zirconium carbide powders by the halogenide process of ZrCl4-C-Mg system (1:1:2, molar ratio) was studied between 300。 and 120$0^{\circ}C$ under Ar gas flow (200 mι/min). The formation mechanism and kinetics of zirconium carbide and characteristics of the synthesized powder were examined by TG-DTA, XRD, SEM and PSA. 1) The formation mechanism of zirconium carbide were as follows, above 30$0^{\circ}C$ ZrCl4(S)+Mg(s)longrightarrowZrCl2(s)+MgCl2(s) above 40$0^{\circ}C$ ZrCl2(S)+Mg(s)longrightarrowZr(s)+MgCl2(s) above 50$0^{\circ}C$ Zr(s)+C(s)longrightarrowZrC(s) 2) The apparent activation energy of the reduction-carbonization at temperature of 800$^{\circ}$to 100$0^{\circ}C$ was 11.9 kcal/mol. 3) The lattice parameter and the crystallite size of ZrC which was produced from the mixture powder of ZrCl4, C and Mg (1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were 4.700A and 180A, respectively. 4) The powders obtained from the mixture powder of ZrCl4, C and Mg(1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were agglomerate with the average size of about 13${\mu}{\textrm}{m}$ in SEM micrograph.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.371-374
• /
• 1999

Y2O3 and Nb2O5 co-doped tetragonal zirconia polycrystals((Y, Nb)-TZP) containing 10 to 30 vol% $Al_2O_3$ were prepared and hydrothermal stability of the composites was evaluated after aging for 5 h at the temperature range of $150^{\circ}C$ $250^{\circ}C$ under 4 MPa $H_2O$ vapor pressure in an autoclave. The (Y, Nb)-TZP/Al2O3 composites showed excellent phase stability under the hydrothermal conditions, as compared with the 3Y-TZP/$Al_2O_3$ composites, due to the combined effects of the Y-Nb ordering in the $t-ZrO_2$ lattice, the reduction of oxygen vacancy concentration, and the $Al_2O_3$ addition. The strength and fracture toughness of the (Y, Nb)-TZP/$Al_2O_3$ composite, containing 20 vol% of 2.8 $Al_2O_3$ particles, were 700 MPa and 8.1 MP.$am^{1/2}$, respectively.

• 대한음성학회지:말소리
• /
• 제59호
• /
• pp.53-68
• /
• 2006

We report the evaluation results of the Korean speech recognition platform called ECHOS. The platform has an object-oriented and reusable architecture so that researchers can easily evaluate their own algorithms. The platform has all intrinsic modules to build a large vocabulary speech recognizer: Noise reduction, end-point detection, feature extraction, hidden Markov model (HMM)-based acoustic modeling, cross-word modeling, n-gram language modeling, n-best search, word graph generation, and Korean-specific language processing. The platform supports both lexical search trees and finite-state networks. It performs word-dependent n-best search with bigram in the forward search stage, and rescores the lattice with trigram in the backward stage. In an 8000-word continuous speech recognition task, the platform with a lexical tree increases 40% of word errors but decreases 50% of recognition time compared to the HTK platform with flat lexicon. ECHOS reduces 40% of recognition errors through incorporation of cross-word modeling. With the number of Gaussian mixtures increasing to 16, it yields word accuracy comparable to the previous lexical tree-based platform, Julius.

• 한국자기학회지
• /
• 제8권1호
• /
• pp.1-5
• /
• 1998

침상형 Fe-Co 합금입자는 고밀도 기록용 자성분말로 응용이 기대되는 재료이다. Co 조성변화에 따른 자기적 성질 중 특히 최미세자기장에 미치는 효과를 Mossbauer 분광법과 투과 전자현미경 (TEM), 그리고 X-선 회절실험 등을 이용하여 조사하였다. 침상형 FenCo(n=5,4,3,2) 합금입자는 화학적 공침법으로 제조하였고, silica 코팅 후에 수소분위가에서 환원 처리하였다. 결정구조는 모든 조성 영역에 걸쳐 체심입방구조로서 Co 조성값의 증가와 함께 격자상수 값은 감소하였다. Mossbauer 분광 실험을 통하여 Co 조성 증가에 기인된 Co 원자들의 국부적 분포 변화는 초미세 자기장 값의 감소를 초래하였다.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.460-464
• /
• 2003

The barium strontium titannate ((Ba,Sr)TiO$_3$:BST) thin films were etched in an inductively coupled plasma (ICP) as a function of CF$_4$/Ar gas mixing ratio. Under CF$_4$(20%)/Ar(80%), the maximum etch rate of the BST films was 400 $\AA$/min. Etching products were redeposited on the surface of BST and then the nature of crystallinity were varied. Therefore, we investigated the etched surface of BST by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The plasma damages were evaluated in terms of leakage current density by Agilent 4145C and dielectric constant by HP 4192 impedance analyzer. After the BST thin films exposed in the plasma, the leakage current density and roughness increases. After annealing at 600 $^{\circ}C$ for 10 min in $O_2$ ambient, the leakage current density, roughness and nonvolatile etch byproducts reduced. From this results, the plasma induced damages were recovered by annealing process owing to the relaxation of lattice mismatches by Ar ions and the desorption of metal fluorides in high temperature.